The black Countryman E6X Omnidirectional Earset Mic for Comtek Transmittersis a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a 3.5mm connector for direct connection to Comtek M-72 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Comtek Transmitters    Headroom for General Speaking    Detachable 1mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Does this come with the XLR to 3.5mm cable as shown in the picture?

A: No it does not: n the Box: Comtek M-216 - Wireless Transmitter (Option P7) Antenna CB-36 ST 1/8" (3.5mm) Stereo Mini Cable Belt Clip C-216 Carrying Case 1-Year Limited Warranty That cable is available as an optional purchase: Comtek CB-36 XLR Audio Cable for M-216 Transmitter B&H # COCB36XLRF MANUAL: https://www.bhphotovideo.com/lit_files/85036.pdf

Q: 2. How do these hook up to the sd 633?

A: The Comtek M-216 features a 3.5mm line input. They offer the CB-36 cable which will allow you to connect from one of the XLR outputs of the Sound Devices 633.

Q: 3. Can I run an audio cable from a headphone jack on an audio source (say a camera, or a wireless microphone receiver) into the 3.5mm jack on this Comtek transmitter and have that transmit to the receiver for someone to monitor the audio that is coming out of the source's headphone jack?

A: Yes, you can take audio from a variety of sources, such as the headphone output of a camera and connect it into the transmitter's 3.5mm line input. This will allow that audio to be heard wirelessly by the person with the receiver.

Q: 4. Is this mic compatible with a UTX-B1 transmitter? And what about the connector?

A: Hi A shopper, Yes the mic and transmitter are compatible and the connector will work. Regards, -Erin

Q: 5. I have had my M-215 for many years and the microphone jack seems to be failing - can this be bought separately? If so what should I ask for at a store that sells them

A: You would have to call Comtek. They are the only ones that might have that part.

Q: 6. What is the transmitting distance for this unit? Are there any receivers that use an external power supply rather than a 9v. battery?

A: Up to 300 feet.

Q: 7. Will this work on a Sony DWT-B01 bodypack transmitter?

A: Yes this mic will work with the Sony DWT-B01 transmitter

Q: 8. Will this work with a Sennheiser ew100 body pack, or only Sony?

A: tried sennheiser but it didn't work. It is just for sony

Q: 9. Can I buy additional reciever to pair up and have a total connections of 3 receiver to 1 transmitter?

A: Yes, you can pair multiple receivers to use with one transmitter. Just be sure to set each receiver to the same frequency as the transmitter. The Comtek PR-216 Beltpack IFB Receiver included with this system is available separately as B&H# COPR216.

Q: 10. Will it work with the Sony WRT 820a?

A: Yes, this mic will work with WRT 820a series transmitters.