The tan Countryman E6i Earset Mic for Audio Technica Wireless Transmittersis a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6i earset's cable terminates to a cH-style 4-pin connector for direct connection to Audio Technica ATW-3201 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Audio Technica Transmitters    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. would this mic be compatible with the canon XA-25...and if so would I need any other accesories to fit?

A: Yes. Be sure phantom power is on. You may need a spacer for it to fit nicely in the XA25's mic holder. I use a rubber pipe spacer from a bicycle light handlebar mount. O-rings will work, too. If you are shooting outside, be sure to get a fuzzy. It won't get all the wind on a windy day, but it will deal with a lot of it.a href= http://www.bhphotovideo.com/c/product/538882-REG/WindTech_MM_25_MM_25_Fur_Fitted_Microphone.html target= _blank http://www.bhphotovideo.com/c/product/538882-REG/WindTech_MM_25_MM_25_Fur_Fitted_Microphone.html/aI use a short XLR cablea href= http://www.bhphotovideo.com/c/product/845562-REG/Kopul_m4003rc_3_Pin_XLR_M_to_Angled.html target= _blank http://www.bhphotovideo.com/c/product/845562-REG/Kopul_m4003rc_3_Pin_XLR_M_to_Angled.html/a

Q: 2. Can I use the AT 803 mic with this unit?

A: The Audio-Technica At 803 lavalier microphone will not connect to this wireless system. I would recommend the Audio-Technica AT899CW - Sub-Miniature Omnidirectional Lavalier Microphone, BH #AUAT899CW, which is a high quality miniature condenser clip-on microphone that has the appropriate locking 4-pin connector.

Q: 3. I have AT 3000 series wireless microphones, are the connectors on my bodypacks compatible with the System 10 connectors?

A: I wish I could answer this. Right after I acquired the equipment some events happened that have prevented me from even trying it out. Sorry - I don't know.

Q: 4. I would like to connect AT875R to Line input in Canon 1Dx II camera, have I to add a phantom power module to run mic, and wich works properly? thanks

A: Yes you need Phantom power

Q: 5. What type of short cable is needed to connect it to a XLR female port on the camera? XLR male to XLR male?

A: The Audio Technica AT875 has a male XLR output, as do all mics with XLR. To connect to a cameras XLR input of similar XLR input device, you will need an XLR male to XLR female cable.Kopul 3000 series cables are a solid choice. a href= http://bhpho.to/1xdCvjQ target= _blank http://bhpho.to/1xdCvjQ/a

Q: 6. Can you use this with the Sony PXW FS7 wireless base on the camera,,,,,or do you have to run an XLR to the Camera?

A: The Audio Technica System 10 receiver requires a cable connection to the Sony PXW-FS7. Not compatible with the Sony Multi Interface shoe.

Q: 7. AT875r vs AT897? The price is close, so I'm not sure. I'd like to use it to achieve good sound with my video, as well as doing some pure audio interviews.

A: If you are concerned about the mic extending into the frame of the shot (on-camera mount) - go with the AT875. It is 4 shorter than the AT897. But the AT897 is the superior product in terms of frequency response, Maximum Input Sound Level (SPL) and rejection of ambient sound from the sides and rear.

Q: 8. What is the Optimal Pickup Range? looking to use it for interviews on set. I would have it over the talents head, out of frame

A: You should be able to place the Audio-Technica AT875R Short Shotgun Microphone about 3 to 5 feet overhead to capture clear audio, then adjust the distance to find the sweet spot, depending on how loud the people are speaking.

Q: 9. will this mic work with an AF100? What mount do I need to attach it to the camera?

A: I use the at8410a microphone shock mount

Q: 10. attaching this to the Canon XA10 what cable do i need to purchase? Thanks!

A: If you are interested in mounting the 875R to the XA10, we recommend a short XLR cable. Kopul makes a variety of high quality cables. The 4000 is a premium cable and comes in coiled or straight.