The light beige Countryman E6 Omnidirectional Earset Mic for WisyCom Transmittersis a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a LEMO 3-pin connector for direct connection to WisyCom MTP30, MTP40, MTP40S, MTP41, and MTP41S wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits WisyCom Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Is the Sony SMC9-4P Connector the same, exactly, as the female 4-pin HIROSE connector?So can I use this Sony ECM44BC lavalier with an Audio Technica ATW-210a wireless transmitter ?

A: The Sony ECM44BC and SMC9-4P are not compatible with Audio Technica transmitters. Sony lavaliers, unless hardwired with an XLR, Sony Lavalier s will be compatible with Sony wireless systems only.

Q: 2. Can this be used with the original wireless go system?

A: Yes, the Rode Lavalier II Omnidirectional Lavalier Microphone can be used with the original Rode Wireless GO system.

Q: 3. Would the 44-b use the XLR-Line or the XLR-Mic audio setting on the camera?

A: The ECM-44B is a microphone, so it outputs mic-level voltage. You would want to use the mic level setting on your camera or recording device.

Q: 4. What extension would I use to get more length to a DSLR?

A: We recommend BH #ROVC1 Rode VC1 3.5mm TRS Microphone Extension Cable for Cameras (10') for extending the length of the Rode Lavalier II Omnidirectional Lavalier Microphone: https://bhpho.to/3rvCsWB

Q: 5. Is this mic compatible with a Sony HDR SR11 camcorder? Looking for best (and cost effective) mic. Have read that some mics have audio issues. Any audio issues with this mic? Thanks!

A: The Sony ECM-44BC features a 4 pin connector designed for connection to specific Sony wireless mic transmitters only. This will not be compatible with a camcorder such as the HDR-SR11 which requires a mic with a 1/8 connector.

Q: 6. Will this work on a Sony DWT-B01 bodypack transmitter?

A: Yes this mic will work with the Sony DWT-B01 transmitter

Q: 7. Is there a better lapel clip that will work with this mic as the supplied clip is next to useless as it does not offer any way to secure the mic cable and therefore I constantly get cable rubbing noise from presenters moving on stage.Even the cheaper (and very good ) Sony UWP-D11 kit comes with a decent lapel clip that allows you to better secure the mic cable?

A: YES

Q: 8. Will this work with a Sennheiser ew100 body pack, or only Sony?

A: tried sennheiser but it didn't work. It is just for sony

Q: 9. Will this microphone work with the Sony UTX-B03 Bodypack Transmitter?

A: This mic is compatible withe SONY UTX-B03 Bodypack Transmitter. It offers a compatible connector and wiring.

Q: 10. Will this mic work with Scarlett Focusrite 2i2?

A: Yes, the microphone will work with the interface. However, please note: battery power only, does not accept phantom power.