You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Countryman E6 Omnidirectional Earset Mic For Line 6 Wireless

Countryman E6 Omnidirectional Earset Mic For Line 6 Wireless
  • Product Code: eq73034
  • Availability: In Stock

$1,650.00 $2,145.00

The tan Countryman E6 Omnidirectional Earset Mic for Line 6 Wirelessis a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a TA4F connector for direct connection to Line 6 TBP12 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Line 6 Transmitters    Headroom for General Speaking    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

Key Specs
Compatible TransmittersLine 6: TBP12
Polar PatternOmnidirectional
Frequency Response20 Hz to 20 kHz
Maximum SPL120 dB (A-Weighted)
SensitivityW5/5/High Gain for General Speaking (H6, E6, EM6, EM2)
Analog Output1x TA4F/Mini-XLR 4-Pin Female
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Microphone
Compatible TransmittersLine 6: TBP12
Polar PatternOmnidirectional
Included Tone/Pattern Caps+4 dB Bright, +0 dB Flat, +8 dB Very Bright
Performance
Frequency Response20 Hz to 20 kHz
Maximum SPL120 dB (A-Weighted)
Sensitivity7.0 mV/Pa
SensitivityW5/5/High Gain for General Speaking (H6, E6, EM6, EM2)
Equivalent Noise Level24 dB (A-Weighted)
Connectivity
Analog Output1x TA4F/Mini-XLR 4-Pin Female
Cable Length5' / 1.52 m
Cable Diameter0.039" / 1 mm
Power
Power SourcesPlug-In Power
Operating Voltage1 to 2 V
Physical
ColorTan
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Weight0.07 oz / 2 g

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. As far as I can tell, there is no master volume for the headphone output. There are only individual controls for mic, instrument/line, and monitor/mix inputs. Is that correct?

A: That is correct - the ART MyMonitorII Personal Monitoring Solution Mic/Line Mixer does not have a single, dedicated master volume control for its headphone output. Instead, the MyMonitorII offers four dedicated level adjustments (Mic, Inst/Line, Stereo Monitor Left, Stereo Monitor Right) which allow the user to create a custom blend of the inputs used on the mixer and which all contribute to the headphone output level, which can achieve a maximum output of +12dBu.

Q: 2. Would I be able to use this on my BMPCC 6k Pro?

A: Yes, you can use the the line-to-mic attenuator but it's not necessary since the BMPCC 6k Pro accepts line level audio through the 3.5mm inputs.

Q: 3. Can I use this to add a headphone jack to my Panasonic G7 to monitor audio?

A: Yes you can. That is a cable to go from line level to mic level. Used so you can plug the output of a line level recorder out. Into a camera at mic level in. With a headphone jack.

Q: 4. How do I hook up a piano mic( power mic) to mixer (RM82)?

A: Your microphone will require phantom power not provide by this mixer. Rolls PB223 Mic Power II Dual 48V Phantom Power Supply B&H # ROPB223

Q: 5. Is the item compatible with the Sony A7s?

A: Yes it is. The Sony A7s has a 1/8 inch mic level input. The Kopul attenuator would be used coming out of a line level source.

Q: 6. Wht is the difference between this cable and ACH4-25MON-RA?

A: The Right - Angle connectors.

Q: 7. Does Klark Teknik CM 1 pass phantom power to mic? Does it employ Ground Lift to prevent phantom power reaching mic?

A: When using the Klark Teknik Mic Booster CM-1 In-Line Microphone Preamplifier, phantom power would not be passed to a connected mic. Regarding a ground lift, Klark Teknik doesn't specify if one is used inside this booster.

Q: 8. Is this compatible with android devices?

A: You can use the Kopul ACH4-25MON with an Android device but you will need to use it with a 3.5mm TRRS adapter to convert the plug from 3.5mm TRS to TRRS since smartphones have a 3.5mm TRRS connector. The Rode SC4 3.5mm TRS Female to 3.5mm Right-Angle TRRS Male Adapter Cable for Smartphones (B&H # ROSC4). Another option would be to use a similar cable that already has a TRRS connector such as the Movo Photo TCB2 XLR Female Microphone to 3.5mm TRRS Male Smartphone Adapter (B&H # MOTCB2) or the MXL Female XLR to 3.5mm Male TRRS and 3.5mm Female TRS Multimedia Adapter Cable (B&H # MXMMCABLE1).

Q: 9. Is the item compatible with the Canon 6D?

A: DSLR Compatibility: The ACH4-25MON is compatible with DSLR cameras that feature a 1/8 unbalanced mic level input including: Canon: EOS Rebel T2i(550D)/T3i(600D)/T4i(650D)/T5i(700D)/SL1(100D) EOS 60D/70D/7D/6D EOS 5D MK ll/MK lll EOS 1DX/1DC/1D MK lV

Q: 10. With a requirement of 4 xlr-m and 4xlr-f, what breakout harness do you suggest for analog audio?

A: At this time, we don't carry the compatible breakout cable you'd need for four (4) XLR male and four (4) XLR female analog audio connections on the Digigram ALP442e-MIC Multichannel PCIe Sound Card with 4 Mic/Line Inputs. For your reference, the SKU/part # for the breakout cable is DIG-SC2422A0301.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Products You May Like