Blonder Tongue Dfcs-32 32-Way Rf Splitter 1Ru

Blonder Tongue Dfcs-32 32-way Rf Splitter 1ru

Product Code: eq73105
Availability: In Stock

$479.85 $662.19

Qty

27 reviews Write a review

Description
Reviews (27)

The 1 RU Blonder Tongue DFCS-32 32-Way RF Splitter 1RUfrom Blonder Tongue DFCS-32 32-Way RF Splitter 1RUis a 5 to 1000 MHz passive splitter with one RF input and 32 RF broadband output ports. The splitter features high isolation between ports and low insertion loss. A -20 dB test port on the front panel allows testing while operating. Two or more units can be used to provide additional output ports. The device is a compact, 1.75" high unit designed for mounting in a standard 19" EIA rack.

5 to 1000 MHz Passive Splitter 32 x Broadband Output Ports High Isolation between Ports Test Port on the Front Panel 19" Rack Mountable

Parameters
Frequency Range	5 to 1000 MHz
Insertion Loss	5 to 40 MHz: 17.2 dB 40 to 450 MHz: 17.5 dB 450 to 750 MHz: 19 dB 750 to 1000 MHz: 20 dB
Isolation	5 to 40 MHz: 30 dB 40 to 450 MHz: 32 dB 450 to 750 MHz: 30 dB 750 to 1000 MHz: 28 dB Test-Point Loss: 20 dB
Input Return Loss	5 to 750 MHz: 20 dB 750 to 1000 MHz: 18 dB
Output Return Loss	5 to 750 MHz: 20 dB 450 to 1000 MHz: 18 dB
Connectors	1 x F-Type Female, Input 1 x F-Type Female Test Input (Front) 32 x F-Type Female, Output
Impedance	75 Ohms
Dimensions (L x W x D)	19 x 1.75 x 8" / 483 x 44 x 203 mm
Weight	7 lb / 3.18 kg
Packaging Info
Package Weight	6.12 lb
Box Dimensions (LxWxH)	23.6 x 12.2 x 4"

Related Questions and Answers

Q: 1. Is this manufactured by Nikon (mh-32 charger)?

A: Yes, the Nikon MH-32 Battery Charger, B&H # NIMH32BC • MFR # 4240, is manufactured by Nikon.

Q: 2. Does this come with any dividers?

A: No it doesn't.

Q: 3. I am trying to replace an old splitter that has been used in a church sanctuary splitting sound from the sanctuary and the TV broadcast. Will this splitter due what we need or do we need to look at the higher cost splitter?

A: Not sure what you are replacing. This may work fine, but please contact us via e-mail with your installation details for assistance: Audio@a href= http://bandh.com target= _blank bandh.com/a

Q: 4. Is this manufactured by Nikon (MH-32)?

A: Yes this is a genuine Nikon charger.

Q: 5. Is there an adapter to allow connection to Bowen's mount flash head?

A: No, I'm sorry. As you noticed, this is specifically for the Venture TTL-600 monolight. If you have a Bowens S mount light or strobe, the most similar such offering is the slightly larger Angler BoomBox Octagonal Softbox with Bowens Mount (36") (B&H# ANBB36DB): https://bhpho.to/3jKL4X3

Q: 6. How many C-Stands (turtle base) would this case be comfortable in handling? Will it handle the weight of 3 Avenger C-Stands (with arms)?

A: I reckon it would. Its a bloody heavy duty bag. It would more be if you could lift it or not

Q: 7. Can I store c-stands in this?

A: It'll depend on how short the stand breaks down. I can just barely fit the grip arm (that measures a little under 42 ) in the bag. it has to go in diagonally to fit. I'd say 40 is the maximum length things can be without needing to jam them in.

Q: 8. Is the mh-32 charger dual voltage?

A: The Nikon MH-32 Battery Charger is dual voltage.

Q: 9. I have 4 UCR411s. I want to connect those to a single RF Venue Diversity Antenna. Would I use one of these for A signals from the UCR411s and another for the B signals? And then just use the input to go to the RF Venue fin? Or do I have the input/outputs of this thing wrong in my head?

A: This is possible to do. However, when you split the antennae feed to the receivers, you will suffer a reduction/ level loss. For that reason, it is suggested to use B&H# LEUFM144. Select 5dB boost and then your revers will all receive an adequate signal

Q: 10. Will this device allow me to attach one directional antenna together with two diversity receivers for wireless microphones ?

A: You would need two of each for two receivers. Each receiver needs two separate antennas. So you would not need a 4-way splitter to do this. Two 2-way splitters would do the job if you have 2 antennas. The part number for a 2-way splitter is ZSC24.

Rachel	17/09/2024
[6.12 lb] needed it for old system works like new when changed. 5

Kent	12/09/2024
[6.12 lb] I don’t use this on an AKG. For me, this little clown nose is perfect for my Sennheiser 416 microphone. I work this microphone close-up. A conventional nylon stocking-type enormous circular windscreen doesn’t allow me to have a proper view of the script I am performing. This little pop filter is expensive but superbly addresses my need. A studio in Hollywood has been successfully using this on the Sennheiser 416 for three decades. When I must record in another studio I have this in my pocket. 5

Kent	12/09/2024
[6.12 lb] I don’t use this on an AKG. For me, this little clown nose is perfect for my Sennheiser 416 microphone. I work this microphone close-up. A conventional nylon stocking-type enormous circular windscreen doesn’t allow me to have a proper view of the script I am performing. This little pop filter is expensive but superbly addresses my need. A studio in Hollywood has been successfully using this on the Sennheiser 416 for three decades. When I must record in another studio I have this in my pocket. 5

Claiborne	05/09/2024
[5 to 1000 MHz] Much better picture than using VCR for modulator and Radio Shack RF switcher. No lines much better picture. I only use Blonder-Tongue for modulators. 5

Howard	28/08/2024
[7 lb / 3.18 kg] Item does what is supposed to do and does it well. 5

Richard	15/08/2024
[6.12 lb] When not being used for fill work in photography the reflectors make great window shades in this times of quarantine and working from home. 5

Richard	15/08/2024
[6.12 lb] When not being used for fill work in photography the reflectors make great window shades in this times of quarantine and working from home. 5