The USB to Canon LP-E12 Dummy Battery Cable (40")from USB to Canon LP-E12 Dummy Battery Cable (40")allows you to use an optional USB power source to power devices that use a Canon LP-E12 battery, devices such as the Canon Rebel SL1, EOS-M, EOS M2, and EOS M10 cameras.

Please be aware that your USB power source must provide at least 2 amps of output (3A recommended). Generally, the USB ports on computers deliver only 1A. Many common USB power banks and power adapters are also limited to 1A. Compatible USB sources include the GyroVu High-Power 3.1 Amp USB Power Supply, High-Capacity 30,000mAh Power Bank, and High-Capacity 40,000mAh Power Bank with 110V Inverter. The cable length is 40".

Run USB Power to LP-E12 Powered Devices    For Canon SL1 & EOS-M/M2/M10 Cameras    2A Output Current

Related Questions and Answers

Q: 1. Can I use this hooked up to an anker power bank to power up the blackmagic 4k?

A: This model with work with any power bank. But depending on the device you will be powering with LP-E6 it might require certain power output. Low current output power banks will not have enough current to power some cameras or monitors. We recommend to use power bank which will have at least 2A output.Similar to our GyroVu model #GV-PB-301. https://www.bhphotovideo.com/c/product/1551207-REG/gyrovu_gv_pb_301_high_power_30_000_mah.html

Q: 2. Is this product compatible with the "Canon EOS M200 Mirrorless Digital Camera with 15-45mm Lens"?

A: Yes, it will, since Canon EOS M200 will for with LP-E12 battery.

Q: 3. How long would a 22000 mAh, 2.4 amp output power bank last when connected to a Canon EOS M50 used as a webcam or for streaming?

A: The time of power Canon M5o really depends on the mode it used for. We can't give you exact figure bu we can compare to standard Dea Michael, As we understood your power bank is 22,000 mAh, but usually this just a specification of the battery inside and electronics is eating at least 10-15% of the power bank capacity. So lets assume that it will put out 19,000 mAh. Our up-converting cable is using around 25% of the power to up-convert form 5V of power bank to 8V of LP-E12 dummy battery. So it will be around 18,250 mAh of useful power. The LP-E12 is around 900 mAh, so 18,250 divided by 900 - will be 15-16 times longer than regular LP-E12. This of coarse just rough estimation and will depend on quality and condition of the power bank. Just for your information we also are providing 30,000 mAh and 40,000 mAh power banks. Sincerely, Gyrovu Team.

Q: 4. what kind of power bank do i need to power bmpcc 4k and 6k?

A: The ZILR USB Type-C to Canon LP-E6 Dummy Battery Cable requires a USB-C power source like https://bhpho.to/3oz0IqC

Q: 5. Is it safe for my camera?

A: This adapter is design to replace Canon LP-E10 battery. We are selling this Item for quite some time, first with DTAP to Dummy Battery , now with USB to Dummy Battery otion. Never had any complains about any problems.

Q: 6. Will the GyroVu usb to LP-E6 work with the Canon R5, assuming 3amp source?

A: Yes.

Q: 7. Will this work to power the Canon EOS RP via a USB power bank?

A: It should work providing that you will use power bank with 2amp USB output. Recommended power banks: GyroVu GV-PB-301 https://www.bhphotovideo.com/c/product/1551207-REG/gyrovu_gv_pb_301_high_power_30_000_mah.html?sts=pi&pim=Y and GyroVu GV-PBID-401 https://www.bhphotovideo.com/c/product/1551208-REG/gyrovu_gv_pbid_401_hi_capacity_40_000_mah.html

Q: 8. Can this be used to power an external monitor (smallhd 502 bright)?

A: Yes this should be able to power an external monitor such as the SmallHD 502. Just ensure that the power block/source you use has the proper voltage output to power your monitor.

Q: 9. Will this work with the canon m50 mirrorless camera?

A: Yes it will as the M50 uses Canon LP-E12 style batteries.

Q: 10. I've tried the GV-USB-LPE12 with a few different power sources but no combination works with my Canon M200. Is there a specific input power requirement? I've tried 5V 2A as well as 9V 1.67A

A: Dear John, Usually complains like this are related to insufficient power provided to the adapter cable. You camera is required certain level of current to function properly. To provide that at least 2.0 Amp USB power source has to be used for the adapter cable. Usually computer USB ports are limited to 1.o Amp. The power banks and USB power supplies if not specified are usually providing 1.0 Amp outputs. You need to used power source with SPECIFIED 2.0 Amp output from reliable manufacturer for adapter to function properly. Please check specifications of the power source your are planning to use with this cable. Recommended GyroVu power banks: GV-PB-301 https://www.gyrovu.com/product-page/high-capacity-30-000-mah-power-bank GV-PBID-401 https://www.gyrovu.com/product-page/high-capacity-40-000-mah-power-bank-with-110v-inverter In case if you will not able to make it working properly we can provide you with RMA ## for return.