Litegear Litedimmer Plus Dc100V Dimming System V-Mount

Litegear Litedimmer Plus Dc100v Dimming System V-mount

Product Code: eq73159
Availability: In Stock

$1,944.00 $2,799.36

Qty

37 reviews Write a review

Description
Reviews (37)

Use this Litegear LiteDimmer Plus DC100V Dimming System V-Mountfrom Litegear LiteDimmer Plus DC100V Dimming System V-Mountto power your compatible +Series light fixture from a V-mount battery. It is compatible with LiteMat + Plus 1, 2, and 2L fixtures and allows you to control the brightness of your fixture's output, as well as create light effects such as paparazzi, fire, and variable low-mode. Additionally, the LiteDimmer Plus allows you to adjust the color temperature of your fixture and provides numerous rigging points for secure attachment.

14.4 VDC Nominal Output Color Temperature Adjustment Selectable Modes Hideaway Knobs & Lock Settings

Connections
Total Outlets	1 x Proprietary
Power
Dimming	0 to 100%
Input Power	9 to 40 VDC
Maximum Wattage	100 W
Output Voltage	24 VDC
General
Battery Mount	V-Mount
Mounting	1/4-20 Female
Dimensions	9.4 x 4.4 x 3.1" / 23.9 x 11.2 x 7.9 cm
Weight	2.4 lb / 1.1 kg
Environmental Resistance	Dust-Resistant (IP20)
Operating Conditions	14 to 122°F / -10 to 50°C

Related Questions and Answers

Q: 1. Is the angle adjustable?

A: The angle is fixed.

Q: 2. does this come with the frame as well or do you need to get that separately?

A: The frame is included.

Q: 3. The XLR output cable in the picture only show one connector, is possible to have two sepparate XLR outputs to be recorded in two sepparate tracks on Zoom H6? That 3.5mm to dual XLR cable comes in the box?

A: That's because the receiver only has one output. It comes with a 3.5mm to 3.5mm and a 3.5mm to XLR.

Q: 4. What all would I need to mount a 100mm pan and tilt head to this Ped? Will I need to buy anything extra?

A: Please add the Vinten 3330-16 100mm Leveling Bowl Adapter to use a 100mm head on the Vinten Osprey Plus OB Pedestal System. Vinten 3330-16 100mm Leveling Bowl Adapter to 4-Bolt Flat Base BH #VI333016 https://bhpho.to/3VvOCgx

Q: 5. Do the two channels into the receiver come out of the receiver as separate channels?

A: It is switchable, so you can have one in each channel (mono) or stereo.

Q: 6. Hoes does the 2 channel receiver record out put the 2 channels, left/right or mixed?

A: The output of the transmitters going to the receiver. Will result in a mixed signal of both mic's out of the receiver.

Q: 7. Does this come in metric?

A: Logan Graphics 440-1: Team System Plus BH #LO4401 • MFR #440-1 doesn't come in Metric.

Q: 8. Can this console be used to control only incandescent stage lights (old school)?

A: The CHAUVET DJ Stage Designer 50 24-Channel Dimming Console is a tree pin DMX control board. To control incandescent lights you will need dimmer packs. As is it is fine for led lights.

Q: 9. Can I make longer than 24 inch cuts?

A: The one I bought is the 40-inch one without end stops so yes. Even with the 24-inch one you can make longer than 24-inch cuts you just have to move the guide to do it. For the extra 10 dollars or so get the longer one.

Q: 10. Just wondering if this light be run off DC and what voltage would it require? Thanks

A: This light can only be used with AC power.

Jeff Coon	26/09/2024
[9 to 40 VDC] I made 3 mats in about half the time it would normally take me with a rule and Exact-o knife, and they looked much better. 5

Jeff Coon	26/09/2024
[9 to 40 VDC] I made 3 mats in about half the time it would normally take me with a rule and Exact-o knife, and they looked much better. 5

Tony	25/09/2024
[100 W] This was all I needed to cut out a double mat board with professional results. 5

Tony	25/09/2024
[100 W] This was all I needed to cut out a double mat board with professional results. 5

Tony	25/09/2024
[100 W] This was all I needed to cut out a double mat board with professional results. 5

Maximilian	21/09/2024
[24 VDC] I bought this on a wim after watching a YouTube video on it knowing that my arms have always been the first to go on a shoot. This relieves all the stress from one forearm and spreads it between the two, as it should. Was hesitant on its size that it wouldn't be super sturdy but it really works well. It's definitely designed perfectly to look like it came with the gimbal, as it should. It's a really nice addition to your gimbal without breaking the bank. Sure, its not wood like the small rig counterparts (who cares), but it's smart because it uses the existing mounting points and is easy to setup. Sure, it can't flip the other way easily, who cares when the optimal direction to hold it is up. Good job PGYTech... good job. Only issue that I can see is that although its very smart to use the tripod that comes with the gimbal as the grip, I'd happily buy a package deal that comes with a well design tripod like Ronin's so you can still easily sit the gimbal down when needed. (not a paid review, I just like taking good photos of good products) 5

Maximilian	21/09/2024
[24 VDC] I bought this on a wim after watching a YouTube video on it knowing that my arms have always been the first to go on a shoot. This relieves all the stress from one forearm and spreads it between the two, as it should. Was hesitant on its size that it wouldn't be super sturdy but it really works well. It's definitely designed perfectly to look like it came with the gimbal, as it should. It's a really nice addition to your gimbal without breaking the bank. Sure, its not wood like the small rig counterparts (who cares), but it's smart because it uses the existing mounting points and is easy to setup. Sure, it can't flip the other way easily, who cares when the optimal direction to hold it is up. Good job PGYTech... good job. Only issue that I can see is that although its very smart to use the tripod that comes with the gimbal as the grip, I'd happily buy a package deal that comes with a well design tripod like Ronin's so you can still easily sit the gimbal down when needed. (not a paid review, I just like taking good photos of good products) 5