Elac Debut Reference Three-Way Floorstanding Speaker Black Walnut

Elac Debut Reference Three-way Floorstanding Speaker Black Walnut

Product Code: eq73288
Availability: In Stock

$2,099.94 $3,191.91

Qty

14 reviews Write a review

Description
Reviews (14)

Enjoy dynamic sound from your amplifier with the ELAC Debut Reference Three-Way Floorstanding Speaker Black Walnutwith black baffle & walnut cabinet from ELAC. The speaker features a three-way design with a 1" cloth dome tweeter, a 5.25" woven aramid-fiber cone mid-woofer, and two 5.25" woven aramid-fiber cone woofers. It produces a 42 Hz to 35 kHz frequency response and accepts up to 140W of power from your amplifier. One front- and two rear-firing dual-flared ports enhance the speaker's bass performance.

2x 5.25" Woven Aramid-Fiber Cone Woofers 5.25" Woven Aramid-Fiber Cone Midrange 1" Cloth Dome Tweeter Up to 140W Power Handling 3x Dual-Flared Ports 5-Way Binding Posts Magnetic Fabric Grille Included

Key Specs
Speaker Configuration	3-Way
Power Handling	140 W
Drivers	1x 1" / 25.4 mm Cloth Tweeter 1x 5.25" / 133.35 mm Woven Aramid-Fiber/Kevlar Midrange 2x 5.25" / 133.35 mm Woven Aramid-Fiber/Kevlar Woofer
Frequency Response	42 Hz to 35 kHz
Inputs/Outputs	5-Way Binding Post Pair Input
Speaker System
Speaker Configuration	3-Way
Power Handling	140 W
Drivers	1x 1" / 25.4 mm Cloth Tweeter 1x 5.25" / 133.35 mm Woven Aramid-Fiber/Kevlar Midrange 2x 5.25" / 133.35 mm Woven Aramid-Fiber/Kevlar Woofer
Passive Radiators	Yes
Enclosure Type	Bass-Reflex
Ports	1x Front-Firing 2x Rear-Firing
Frequency Response	42 Hz to 35 kHz
Impedance	6 Ohms
Inputs/Outputs	5-Way Binding Post Pair Input
Crossover	90 Hz 2.2 kHz
Sensitivity	87 dB
Physical
Cabinet Material	MDF
Grille	Cloth (Removable)
Dimensions	7.3 x 9.5 x 40" / 18.5 x 24.1 x 101.6 cm
Weight	36.8 lb / 16.7 kg
Packaging Info
Package Weight	49 lb
Box Dimensions (LxWxH)	47.75 x 16.25 x 13.25"

The Reference Series' waveguide and grille design enhance upper high-frequency response.

Three dual-flared ports allow for lower noise and higher bass output for improved bass dynamics.

A full-perimeter brace that joins the top and side panels significantly lessens cabinet vibrations, minimizing cabinet coloration.

Dual cast chassis woofers provide improved stiffness for both strengthening the front baffle and minimizing chassis resonances.

Oversized ceramic magnets produce high motor strength for powerful bass reproduction.

The top and bottom plates are constructed from low carbon steel for high magnetic conductivity to maximize flux density.

Related Questions and Answers

Q: 1. Will these speakers work well as rear channel speakers with a system powered by a Yamaha RX-V485 receiver?

A: Yes they will very well as rear surround speakers.

Q: 2. Can they be used for a sound bar back speakers?

A: Only if there is a way to hook them up to the soundbar. These are designed to be used as a front L/R stereo pair. Seems like overkill for rear speakers with a soundbar.

Q: 3. Do these ideally need max 120 watt input PER speaker or 120 total?

A: The maximum recommended wattage is 120w per channel.

Q: 4. Is possible to surface mount these to the ceiling to use as Atmos ceiling speakers? Thanks!

A: No. Wall brackets are included though.

Q: 5. Can it be wall mounted?

A: Yes. 100 %. 6.2 way to go for wall mount. Put them on wall shelves or hang etc. Important point is the breather is on front.

Q: 6. Is a Onkyo TX-8020 Stereo Receiver good for this set?

A: Yes. These ELAC speakers will perform very well with your receiver: Onkyo TX-8020: 50 watts x 2 (stereo) into 8 ohms (20-20,000 Hz) at 0.08% THD

Q: 7. What is the country of manufacturing of this product?

A: China

Q: 8. What are the measurements, and the weight of this speaker B&H gives no specs whatsoever?

A: The dimensions and weight of the Polk Audio Signature Elite ES55 Floorstanding Speaker (Walnut, Single) are as follows: Width 8.5" (21.6 cm) Height 41.5" (105.41 cm) Depth 12.5" (31.75 cm) Weight 44 lbs (19.96 kg)

Q: 9. What is the recommended caliber for these speakers?

A: Depending upon the length of your speaker wire run, I would not use a wire gauge smaller than 18 AWG: Pyramid High Quality 18 Gauge Speaker Zip Wire (100' Spool) MFR #RSW18100 • BH #PY18HQSZW100

Q: 10. Is ONKYO CR-N775D Receiver capable of bringing out the best from this pair of speakers?-powerfull enough?

A: The ELAC Debut 2.0 B6.2 2-Way Bookshelf Speakers (Pair), B&H # ELDB62BK, can handle a total power input of 120W, which the Onkyo CR-N775D Receiver would not provide in full.

Vadym Kolesnyk	29/09/2024
[6 Ohms] Initially I didn't like it too much. It had too warm sound for me. But after I adjusted EQ for it and spent few weeks with it, now I love it. I made following EQ adjustments: 63Hz, 125Hz and 250Hz - minus 3dB. And 1kHz - plus 2dB. And crossovers: 90Hz I compared it with Paradigm Premier 500C and B&W HTM6 S3. And I like this ELAC much more. Paradigm has no energy and dynamics in sound. And B&W is to sharp for me. Warmer is better than sharper for movies as for me. Also my wife likes ELAC design. It matches with our new shelf color. And I took it with 200 USD off on some good sale on B&H. For 260 USD it is super hard to beat by price/quality. So, I decided to keep it for my sound system. Movies became much more enjoyable with this center speaker. I highly recommend it. 5

Irv	16/08/2024
[140 W ] The Klipsch RP-8000F II speakers provide great sound without breaking the bank. As a previous Klipsch RP-8000F owner, I was skeptical of buying these speakers since they just sounded terrific. Whenever a manufacturer comes out with a newer model within 2-3 years, you can expect some minor improvement to justify the higher pricing. The RP-8000F II speakers do not follow this pattern. Instead they offer even better audio than the original. Listening to these speakers, it sounded as though I added an additional subwoofer to give much improved bass. Klipsch has improved the size of the horn to make the RP-8000F IIs sound as good as they are. Of course, you also get Klipsch's outstanding build quality. These speaker weigh an amazing 60+ pounds each! Although I use these speakers primarily for home theater, they also provide great audio for music applications. If you're looking for an outstanding speaker for a medium to large room, you can't beat the Klipsch RP-8000F II speakers! 5

Irv	16/08/2024
[140 W ] The Klipsch RP-8000F II speakers provide great sound without breaking the bank. As a previous Klipsch RP-8000F owner, I was skeptical of buying these speakers since they just sounded terrific. Whenever a manufacturer comes out with a newer model within 2-3 years, you can expect some minor improvement to justify the higher pricing. The RP-8000F II speakers do not follow this pattern. Instead they offer even better audio than the original. Listening to these speakers, it sounded as though I added an additional subwoofer to give much improved bass. Klipsch has improved the size of the horn to make the RP-8000F IIs sound as good as they are. Of course, you also get Klipsch's outstanding build quality. These speaker weigh an amazing 60+ pounds each! Although I use these speakers primarily for home theater, they also provide great audio for music applications. If you're looking for an outstanding speaker for a medium to large room, you can't beat the Klipsch RP-8000F II speakers! 5

David	11/07/2024
[49 lb] Was looking for audio speakers for the system tied into the computer, tuner, everything else that wasn't tied to the home theatre system. These are perfect. Clean sound, clean bass. 5

David	11/07/2024
[49 lb] Was looking for audio speakers for the system tied into the computer, tuner, everything else that wasn't tied to the home theatre system. These are perfect. Clean sound, clean bass. 5

Ryan	15/06/2024
[140 W ] The sound, build and finish of these is positively incredible. Listening to my music library, with them powered by the marantz model 30 is like hearing it for the first time all over again. They have a pleasant roll off on highs, so everything is crisp, but nothing feels piercing. Mids are splendid. The low end leaves a little to be desired for sub bass, but that’s expected from this type of speaker. The lows this does cover are powerful and robust. The one quirky thing about them, is the feet are not attached. They are little spikes and platters that you rest them on. This means it is always a two person job to move the speakers. Not an issue, if you don’t move them often, but I could see that being a problem for some people. Overall though, I simply cannot recommend these enough. They are fantastic. 5

Mikhail	05/06/2024
[87 dB] thank you for speakers so far everything is good 5

Mikhail	05/06/2024
[87 dB] thank you for speakers so far everything is good 5

juncai	02/05/2024
[49 lb] Great sounds 5

Steven	16/04/2024
[140 W ] Couldn't decide if I wanted these or higher cost B & W's but these were well worth it and priced well for the audio quality they provide. 5