Split screens with the DisplayPort 1.2 to Dual DisplayPort MST 4K Hub from C2G. Featuring a male DisplayPort 1.2 and two female DisplayPort ports, this hub is designed to connect two DisplayPort monitors to a single DisplayPort 1.2 output on a video card. Capable of supporting two 3840 x 2160 4K displays with 30 Hz refresh rates, the hub can alternatively supply a single 3840 x 2160 4K display with a 60 Hz refresh rate. Additionally, the C2G DisplayPort 1.2 Hub supports Single Stream Transport and Multi Stream Transport, or SST and MST, respectively. This compatibility allows older SST or MST monitors to work with the C2G adapter's DisplayPort connections with an appropriate, optional adapter. Having a max bandwidth of up to 5.4 Gb/s, this hub also supports 7.1-channel surround sound. Requiring 5V at 2A or 10W of power, this adapter may need additional external power through the integrated female micro-USB port, depending on the connected source device.

1 x DisplayPort 1.2 Male    2 x DisplayPort Female    Supports Two 4K Monitors @ 30 Hz    Supports One 4K Monitor @ 60 Hz    Supports 7.1-Channel Surround Sound    Supports SST and MST Displays    Up to 5.4Gb/s Bandwidth    1 x Micro-USB Power Port

Take advantage of Single Stream Transport or Multi Stream Transport to connect to older legacy monitors, including SST or MST displays using VGA, DVI, or HDMI connections.

Split your display connection between two 3840 x 2640 4K monitors with 30 Hz refresh rates. Conversely, enjoy a higher refresh rate of 60 Hz with a single 3840 x 2640 4K display.

Related Questions and Answers

Q: 1. Will this support a single 10 bit 4k DisplayPort 1.4 display @120hz refresh rate, running display from an M1 max MBP?

A: M1 Max is Up to three external displays with up to 6K resolution and one external display with up to 4K resolution at 60Hz at over a billion colors.

Q: 2. DHCP 2.2, does this box support it so I can stream content to my monitor from a Mac Studio?

A: Yes, the OWC Thunderbolt 3 to Dual DisplayPort Adapter supports HDCP 2.2.

Q: 3. Follow up question: is it possible to run, on an M1 max MBP: (a) one 10 bit 4k DisplayPort 1.4 display @120hz refresh rate using this adapter, PLUS, (b) through a second TB 3/4 port on the MBP, an SDI monitor, via a Black Magic Design Ultra or 4K TB to SDI box? Thank you.

A: Yes, you can use a single display at 3840 x 2160 Displays @ 144 Hz on the OWC Thunderbolt 3 to Dual DisplayPort Adapter on the M1 max MacBook Pro.

Q: 4. Does this use Display Stream Compression?

A: Yes, this OWC Thunderbolt 3 to Dual DisplayPort Adapter does have DSC (Display Stream Compression). https://www.owc.com/solutions/thunderbolt-dual-displayport-adapter

Q: 5. How many monitors can be connected?

A: USB3VDOCK4DP supports one external display over a DiplsayPort connection. Atha, StarTech.com Support

Q: 6. Can this product split 4096 x 2160, or is it limited to 3840x2160?

A: The MuxLab 1x2 UHD 4K DisplayPort Splitter does not support DCI 4k resolutions. The highest resolution supported is UHD 3840 x 2160p60.

Q: 7. Using an M1 Macbook Pro 16 and two 27-inch 4k displays, can I plug this adapter into a powered Thunderbolt 4 hub and get extended displays? Or does it need to connect directly to one of the laptop's Thunderbolt ports?

A: It would depend on the capabilities of the other hub, but it is typically a better option to plug directly into the laptop. There is no guarantee that the OWC Thunderbolt 3 to Dual DisplayPort Adapter will work when connected via another adapter.

Q: 8. Will this support two monitors (not mirrored) for a Macmini9,1?

A: Yes, the OWC Thunderbolt 3 to Dual DisplayPort Adapter BH #OWCTB3ADP2DP can support dual monitors on a Mac Mini 9,1, not mirrored.

Q: 9. My laptop has a Thunderbolt3, and I have two monitors with DisplayPort 1.2. Will this work with DisplayPort 1.2 ?

A: Yes, this will work with DisplayPort 1.2.

Q: 10. Does this splitter emulate EDID or will the two monitors fight for control of the graphics card?

A: This splitter does emulate the EDID.