Building upon the success of the original Elite-Series speakers, the Yorkville EF215P is a professional, easy to use, powered portable PA speaker well suited for musicians, singer/songwriters, mobile DJs, and other sound providers. The most bass-heavy speaker of the Elite series, this full-range cabinet is well suited as a FOH mains speaker, side-fill, or powerful DJ monitor. Please note, the EF215 does not offer a pole cup, so using a tripod speaker stand is not an option. However, the unit is relatively lightweight at 93 lb and works well in a ground-stack configuration. Additionally, there are 8 fly-points for flexibility in deployment. When used as a main speaker, a pair of EF215Ps are well equipped to cover an audience of up to 400.

A push button on the back of the speaker allows you to physically switch between four different EQ and tone modes: Club, Concert, Vocal, and User, which is setup up via the Bluetooth Yorkville app with a maximum of five different parametric equalization points with adjustable boost, cut and Q. A dedicated subwoofer button engages a high-pass filter, essentially removing frequencies below 100 Hz when using with a subwoofer. There are two indicators: a red clip LED and a yellow limit LED, which provide accurate and safe operation, even when driving hard.

The EF215P has a bypassable 2-channel mixer section, which includes a line input with a combo XLR-1/4" jack and a 3.5mm TRS input jack with level control and a microphone input with an XLR input and dedicated level control. If using an outboard mixer or linking several speakers (up to 16), use the main combo XLR-1/4" input. An XLR Thru output passes the signal from the main or mixer input to additional speakers. The 2400W (Peak) Class-D amplifier powers the dual 15" woofers and 3" compression driver, providing a full-range frequency response of 40 Hz to 16 kHz (±3 dB) and a max SPL output of 133 dB. The 60 x 40° coverage pattern provides even coverage of the audience area, while keeping the sound off the walls, ceiling, and floor. With the E215P trapezoidal enclosure, two EF215P speakers can be arrayed, which not only expands the horizontal coverage to 120°, but also would also increase the SPL by an additional 3 dB. The EF215P ships with a 25' IEC power cable.

Bluetooth Controlled DSP with User EQ    2400W Peak Class-D Amplifier    Dual 15" Woofer & 3" HF Driver    DSP Mode (Club, Concert, Vocal, Custom)    60 x 40° Horn Waveguide Coverage Pattern    Dual Combo XLR-1/4" Inputs    Five Handles for Easy Transport    ABS-Coated Birch Plywood Enclosure    Includes 25' Power Cord

• Power Switch & Mode LED: Turns the power On or Off and the illumination of the Mode LED indicates that unit is On
• Limit LED:  Amber Limit LED indicates that the cabinet is operating at full power and the limiter is actively reducing the signal level
• Clip LED: Red Clip LED indicates that the signal level is excessive and is causing distortion. To reduce clipping, turn down the mixer levels
• Main In / Thru (Link) Connectors:
  • Main In / Thru (Link) connectors allow powered cabinets to be driven from a single source
  • Link up to 16 EF-Series powered cabinets
  • Main In / Thru (Link) jacks are the correct input to use when using an external mixer
  • For weaker signals, use the Line inputs of the first cabinet in the chain 
  • To ensure maximum hum rejection, use proper balanced cables
• Mixer On/Off:
  • Turns the internal mixer ‘On’ or ‘Off’
  • When Mic or Line inputs are used, set to the ‘On’ position
  • If these inputs are not being used, the mixer should be turned ‘Off’
• Line Inputs:
  • Line inputs allow line-level sources such as digital media players (laptops, tablets, or smartphones) and CD players to be connected
  • If microphone is connected to Channel 1, it will have lower gain compared to Channel 2’s Mic input
  • (Phantom power is NOT available on Channel 1)
  • Line control adjusts the input volume level of devices plugged into the Line input
• Mic Inputs:
  • Any standard microphone may be connected to the Mic input
  • Phantom power is built in
  • Mic control adjusts the volume level for the Mic input
• Master Control:
  • Adjusts the level of the individual cabinet
  • When Linking multiple cabinets, use this control to individually adjust the relative volumes of each cabinet 
  • Master control is designed to be used in the 12 o’clock (middle) position, only minor adjustments are recommended
• Mode Selector: Applies specific EQ and tone settings for the EF-Series powered cabinet
  • Club: Boosted bass and enhanced highs make this mode ideal for music playback
  • Concert: Allows instruments and vocals to be equally and naturally reproduced, which is best for live performance
  • Vocal: Shaped response specifically for the human voice range ensures vocal intelligibility
  • User: Flat by default, can be customized by a user through the Yorkville app with a maximum of five different parametric equalization points with adjustable boost, cut and Q
• Sub Switch:
  • For operation with subwoofers, switch shuts off the low-frequency boost and filters out signals below 100 Hz
  • Only affects signals to the internal amplifier and does not affect signals going out from the internal mixer or to signals passing through the Link connections
• Bluetooth Control:
  • This control enables or disables the Bluetooth connection between a tablet or a smartphone using the Yorkville App
  • Pressing this control button for more than 4 seconds resets the EF-Series powered cabinet to factory settings

Related Questions and Answers

Q: 1. Can the Bluetooth input be used while also linking two speakers together?

A: Yes, you can stream audio via Bluetooth to the Mackie SRT215 Powered Portable PA Speaker while also linking two speakers together.

Q: 2. Does it include the stand in the photo?

A: No, the Samson RS110A Powered Portable PA Speaker does not include a speaker stand, but you can purchase one separately. The Auray SS-25S Compact Height-Adjustable Steel Speaker Stand with Tripod Base (B&H # AUSS25S) is a good option.

Q: 3. what is the rms watts on this speaker?

A: PylePro lists the RMS power as 600 Watts.

Q: 4. How do you connect multiple Pyle Pro 1,200W Powered 2-Way Speakers so that they play from the same source and are in sync with one another? For example: A large backyard event.

A: The Pyle Pro PPHP1537UB are able to be daisy chained from one unit to the next using the LINE OUT and LINE IN connections with an XLR cable such as the Kopul 3000 series cable. a href= http://bhpho.to/1xhQWoG target= _blank http://bhpho.to/1xhQWoG/a

Q: 5. do you knok what the power comsumption is thanks doug canada ?

A: Power consumption is: 120/180

Q: 6. how to set up BLUETOOTH for pyle pphp1537ub?

A: First turn it on,connect to Bluetooth that the name.Hit the button mode one time.It will disconect and then connect automatically.Play with it.

Q: 7. can you disingade the processor and just you's them flat ?thanks

A: The YSL10P features three EQ models to shape the speaker's tonal response so it will sound best when used for different applications. Other than EQ, there is no built-in processing like reverb, compression, limiter, noise gates, etc. Concert mode is intended for live performance and provides a natural sound for use with instruments and vocals. Club mode boosts bass frequencies and enhances highs for playing back recorded music. Monitor mode delivers a clear tone for voice and minimizes feedback which allows the speaker to work well as a stage monitor. Monitor mode offers the flattest response of the three modes. Here is a link to the user manual which provides more details about the settings: https://yorkville.com/downloads/servman/sm_yxl10p-yxl12p-yxl15p.pdf?v=1606744608

Q: 8. Hi! Can I add another speaker to this system in order to have two speakers?

A: Yes. You can use the XLR Line output of this speaker to connect to the XLR input of another powered speaker.

Q: 9. Does this unit have a head phone capability ? Thanks.....

A: No, the Pyle Pro PPHP155ST does not have the required outputs to connect to headphones.

Q: 10. When playing mp3's from USB does the device have shuffle mode?

A: No, it does not have shuffle mode. The transport controls are play/pause and skip forward/backward.