This CAMVATE 15mm Black Aluminum Rods Set (3.94", 7.8", 11.8")from CAMVATE 15mm Black Aluminum Rods Set (3.94", 7.8", 11.8")lets you attach 15mm rod-mounted accessories to your rig. These black aluminum rods measure 3.94" in length and, with the appropriate baseplate, will conform to the 15mm LWS rod standard for accessory mounting. The aluminum construction keeps these rods lightweight while allowing them to maintain the rigidity necessary for accessory support.

3.94, 7.8 & 11.8" 15mm Rod Pairs    2 x 15mm Rod Connectors    Fits Standard 15mm Rod System    M12/12mm Threads on Each End    Black Anodized Aluminum

Related Questions and Answers

Q: 1. Hello I would like to use it to mount the follow focus that is in the link with my Canon R and a 50mm. https://www.bhphotovideo.com/c/product/1483532-REG/filmcity_hs_2_follow_focus_with_hard.html Can it work? Thanks

A: Yes this should work with your camera and lens. However I would recommend this model because the of level adjustment that the Camvate model does not offer. https://bhpho.to/398v0sl

Q: 2. will this fit fine onto my sony A6300 & A7iii?

A: You are able to screw this into the bottom of your Sony cameras.

Q: 3. Does this include plastic or metal filter trays?

A: The matte box comes with one of each 4x4 and 4x5.65 metal filter tray.

Q: 4. Hi, can this fit OVER the Sony FE PZ 28-135mm F4 G OSS. I want to use the 95mm thread to attach my NISI VND filter at the same time as the matt box. So I guess I need something like a 114mm - 104/5?mm non threaded adaptor, tham make sure the filter can freely turn within the matt box.

A: Yes, the Cavision 4 x 5.65" Matte Box Kit will work with the Sony 28-135 lens.

Q: 5. Can the hard stops be removed for lens that already have hard stops and require more than one full rotation of the control?

A: Alan I have a lens with hard stops. The purpose of the follow focus is to create hard stops inside the range of the hard stops on the lens. If you wish to use the lens hard stops simply push the hard stop arrow on the FF all the way back to disengage it. you can also loosen the adjustable screws so that they rest at the bottom of the disk and don't interfere with anything else. Jeff

Q: 6. Minimum height of this light stand is given as 1.8' or .7 meters. 1.8' is approximately 27". 0.7 meters is approximately 27 or 28 inches. What is the correct minimum height for this light stand?

A: Its is 27.17". Thank you for pointing out the typo.

Q: 7. Can someone tell me about the top attachments point? It doesn't look threaded; is it? Is it designed to come off? I'm accustomed to the male threaded stud for light stands, so how will I attach a light to this? Thanks

A: Hi, B&H asked me to answer your question as I have purchased the stand myself. I am just another customer. You are correct, it is not threaded and it is not designed to come off. But it is a very cool universally designed male fitting. In order to make it work, you also need to purchase the Litepanels SOLA ENG stand adapter as well - B&H# LISESA : Mfr# 9006105. It fits over top of the male stand plug and is securely attached by the twist handle. Lastly, that adapter comes with threaded screw on the top to match your light - 1/4 am almost certain. The stand is great, so is the adapter. Gives a lot of options combined. I don't think you will be disappointed if you buy them. Good luck and good shooting!

Q: 8. This says for 19mm Rods. Is that accurate or does it actually mean 15mm rods?

A: No, this follow focus is designed to be used with 19mm rods. Here is the one that is compatible with 15mm rods: https://tinyurl.com/3nnkb2ew

Q: 9. Is this backwards compatible with and run at 10 gb/s when using a usb 3.1/2 gen 2 device?

A: Yes, Thunderbolt 3 is cross-compatible with USB and will run at the speed of the host device when connected as such.

Q: 10. Does this support charging for a 14" macbook pro?

A: The Sabrent Thunderbolt 3 / USB Type-C Cable (7.8", Black) BH #SACBT320 can be used to carry a charge.