With the Telex BP4000A4M Single-Channel Portable Beltpack Headset Station, you can stay in communication on an RTS, Audiocom, or Clear-Com intercom system. This wired beltpack station features auto-wiring scheme detection, which automatically recognizes the system you plug it into, and configures itself to be used with it.

The beltpack also features intelligent power management, so you can daisy-chain up to 40 beltpacks by using a single (optional) PS-20 power supply. A current pump circuit constantly keeps tabs on overall cable length, versus the actual current consumption, so each beltpack receives the voltage it needs.

The BP-4000 has additional features to help make it easy to integrate it into an intercom system, including guided setup and various communication controls. Connections are made by means of a male, 4-pin XLR connection.

For RTS, Audiocom & Clear-Com Systems    Single-Channel Portable Beltpack Station    Dual-Sided Communication Headset    3.5mm TRRS to XLR 4-Pin Headset Cable    20' 3-Pin XLR Cable    Auto System Detection and Configuration    Intelligent Power Management    Enhanced Talk Button Control    Cardioid Dynamic Headset Microphone    Gooseneck with Mute Functionality

You have the option to set your talk settings to either "always on", "always off", or "switching". A built-in blinking lamp gives you a visual indicator to incoming calls.

Any user on the intercom can instantly mute the mics on all attached BP4000A4M beltpacks by sending an inaudible "kill signal". This feature can be overridden if needed, but is useful to have in situations where an open mic somewhere in the partyline needs to be immediately silenced.

Rather than configure internal jumpers and switches, short voice prompts help you navigate the menu options to configure the BP4000A4M. If needed, you also have the ability to reset the beltpack to factory default settings.

The BP4000A4M has a 4-pin male XLR port that is compatible with a (separately available) 4-pin female XLR headset. Both dynamic and electret headset microphones are supported.

Related Questions and Answers

Q: 1. Would this headset work with a Riedel beltpack?

A: This headset is wired for Telex intercom systems with a 4-pin female connector. so if the pin configuration is different for Riedel, you may have to disconnect and solder the connections appropriately.

Q: 2. Would this headset work with an Clear com set up?

A: Yes, it works with Clear Com set ups.

Q: 3. Is this compatible with the Clear-Com RS-603 belt pack?

A: yes, I'm pretty sure it would work, just check the connector size

Q: 4. i need to order four of these , which body pack would you recommend?

A: Telex BP4000A4F Single-Channel Portable Beltpack Headset Station (4-Pin XLR, Female) B&H # TEBP4000A4F

Q: 5. what are the dimensions of the headphones themselves?

A: The Shure BRH440M Headset has 40mm drivers. The headband is adjustable and the earcups can be folded up for storage and transport.

Q: 6. Is the headset connector on the box a 4-pin female or male?

A: The Mono Headset out is a 4-pin Female, and the Stereo Headset out is a 5-pin female. The line out is a 3-pin female XLR.

Q: 7. Does it come with a case? Would like to keep it protected and in good condition while traveling.

A: It doesn't have any case=

Q: 8. What's the difference between the Telex HR-2R5 and Telex HR-2A5 headsets?

A: The HR-2 headset ships with multiple connection options. The HR-2R5 features a 5-pin male XLR connector. The HR-2A5 features a 5-pin XLR female connector.

Q: 9. Is the cord coiled or straight? Thank you.

A: The PH 88 has a 6 foot straight cable ghardwired with a 4 Pin female XLR connector.

Q: 10. What is the plug(s) on this headset? 3.5mm TRS? 1/4" + XLR (send/receive)? No pictures and nothing listed in the specs

A: The Shure Dual-Sided Broadcast Headset does not include a cable with purchase. The cable can be added separately via the options linked here: https://bhpho.to/3B7CWXo