The DPA DAD6010 Microdot to TA4F Adapteris simply an adapter that features the DPA standard Microdot connection and a Switchcraft TA4F connection. The adapter allows you to connect a DPA microphone to a Shure wireless transmitter or similar device that uses a TA4M connection for audio and plug-in power.

Adapts DPA Mic to Wireless Transmitter    For Shure Transmitters with TA4M    Also for Line 6 XD-V70L & TOA WM4300    Microdot to TA4F Switchcraft Connection

• Shure: Works with Shure transmitters equipped with a TA4M connector, including the AD1, ADX1, AXT100TA4M, BLX1, GLXD1, MXW1, PGXD1, QLXD1, SLX1, SLXD1, ULX1, and ULXD1
• Line 6: Works with the TBP12 and XD-V70L transmitters
• TOA: Works with WM4300 transmitters

Related Questions and Answers

Q: 1. Kindly is this adapter compatible with the Sennheiser SK 5212 II? Thank you

A: Yes, the DPA DAD6003 MicroDot to 3-pin Lemo Connector is compatible for use with the Sennheiser SK 5212-II wireless transmitter.

Q: 2. Will this connect a microdot mic from DPA (4097 for instance) to a Zaxcom LA2.5 transmitter?

A: The DAD6003 Microdot to 3-Pin LEMO Adapter does not officially list compatibility with Zaxcom devices, but it will work with most devices with a 3-pin LEMO input.

Q: 3. Would it work with the Sennheiser EW100 G3?

A: This adaptor is for DPA to Sennheiser wiring standard: B&H # DPDAD6034

Q: 4. so this is the adapter needed for "DPA Microphones 4560 CORE Binaural Headset Microphone" when connecting to Zoom F3?

A: Since there are two Microdot output connectors on the DPA Microphones 4560 CORE Binaural Headset Microphone, two of the DPA Microphones DAD6001 Microdot to 3-Pin XLR Adapters are required to connect the DPA 4560 mic to the XLR inputs on the Zoom F3 Portable Field Recorder. You will need to turn on phantom power for the two inputs on the recorder for the mics to receive power.

Q: 5. Is this adapter also compatible with Lectrosonics SSM transmitter that uses a 3-pin lemon connection?

A: The DAD6003 MicroDot adapter can be used with the Lectrosonics SSD transmitter.

Q: 6. Is this compatible with the Sound Devices A10/A20 transmitters?

A: Yes. This DPA Microphones DAD6003 Microdot to 3-Pin LEMO Adapter will work for connecting microphones with the microdot connector to SoundDevices A10 or A20 transmitters.

Q: 7. Can i use it on Sony Wireless microphones? Like Sony UWP

A: No, use this instead link below its designed for Sony uwp https://www.bhphotovideo.com/c/product/1612120-REG/deity_microphones_daksmicrodotda35s_da35s_microdot_to_sony.html?sts=pi&pim=Y

Q: 8. Can I use this with a Shure 47 or Sanken COS11D Lav that has a microdot connector? If not, what is the best solution, please. Thanks

A: Any microphone with the Microdot connector is expecting a DC bias level to bias the electret capsule. Normally the microdot connector of a bodypack will have approx 5 V DC bias. This DPA adapter is not just a simple resistive divider - it has a complete circuit board with biasing circuit and buffer amplifier to drive long mic cables. I measured 8 V open-circuit, and 2.5 V with my DPA 4066 headset connected. This leads me to believe that the final DC voltage level will depend on the bias current drawn by the specific brand/model of electret mic you connect to it (but it will never exceed 8 V). So, although I have not tested the particular models you mentioned, I believe that any microphone with a microdot connector can be used with this adapter without risk of damage. This is certainly a very nicely-made adapter with no expense spared on the circuit from what I can see.

Q: 9. can this be used with a shure twinplex lav?

A: No, the Tentacle Sync MA01 is wired for DPA microphones specifically. Other brands with microdot connections will not be compatible.

Q: 10. Is this compatible with the Audio ltd A10

A: Currently, Audio LTD is unavailable at B&H- and so we cannot test this combination. However, the DAD6003 should work based on available documentation on the A10 wireless system. On A10-TX, the ground is not terminated to the pin as is the case with the Sennheiser SK transmitters that feature a 3 pin Lemo.