Etc Source Four Jr 26° Fixture Bare Ends White

Product Code: eq74224
Availability: In Stock

$1,785.00 $2,748.90

Qty

34 reviews Write a review

Description
Reviews (34)

The white ETC Source Four jr 26° Fixture Bare Ends Whitesupports tungsten bulbs up to 575W, runs on 115 VAC, and features bare ends so you can attach your own power plug. Small in size, the Source Four jr is well suited for both large and small venues, and when lamped with a 575W HPL bulb, it compares favorably with larger ellipsoidal lights from other manufacturers. It can accept different bulbs, supporting a maximum of 575W, and it comes with an interchangeable 26° lens tube, and projects a beam with a beam edge adjustable from soft to hard. The fixture features die-cast aluminum construction and has a steel yoke with two mounting positions. The Source Four is well known for its sharp optics and ease of use, and this fixture continues that tradition.

It features antireflection coated optical quality glass and a borosilicate reflector with a dichroic coating that helps it remove 90% of the heat while reflecting more than 95% of the visible light. Anti-vibration shockmounts are used to secure the reflector and lens tube. The fixture features two accessory slots and a slot for either glass or stainless-steel gobos (patterns). It also features a wide accessory slot suitable for use with motorized pattern devices or an optional iris. It accepts a 6.25" gel frame and has insulated control knobs and a rear handle. You can center your bulb for best results without tools, and once set, changing the bulb does not require re-centering.

Interchangeable Lens Tubes Beam Edge Adjustable Soft to Hard Die-Cast Aluminum Construction Rotating Shutter Assembly Slot for Glass or Stainless Steel Gobos Accepts 6.25" Gel Frame Insulated Control Knobs and Rear Handle Tool-Free Lamp Centering Adjusting

Parameters
Beam Spread	26°
Max. Bulb Wattage	575 W
Photometrics	Measured with an HPL 575 W, 115 V, 300 Hour Lamp Throw Distance 45' / 13.72 m Illuminance: 45 fc / 486 lux Field Diameter: 20' / 6.1 m
Certifications	UL cUL
Electrical	115 VAC Plug: Bare Ends
Dimensions	Height with Yoke to Center Max: 8.8" / 22.4 cm Min: 6.1" / 15.5 cm Length 19.3" / 49 cm Width 9.7" / 24.6 cm
Weight	7.7 lb / 3.49 kg (without C-Clamp) 10 lb / 7.5 kg (with C-Clamp)

Optimized optical system for improved photometric performance and field uniformity allows for saturated colors and long throws
Projector-quality, dual aspheric lenses
Superior quality optical glass with advanced AR coatings
Provides crisp edge definition and high gobo contrast
Faceted borosilicate reflector with dichroic cold mirror coating removes more than 90% infrared radiation (heat) and reflects greater than 95% of visible light for an extremely efficient fixture
Reflector secured with anti-vibration shockmounts
Lenses secured with anti-vibration shockmounts
Tool-free, positive locking X, Y and Z lamp centering adjustments, unaffected by re-lamping
Beam edge continually adjustable from hard to soft
Interchangeable lens barrels permit selection of 26, 36, 50°, as well as 25 to 50° zoom range lens tubes

Related Questions and Answers

Q: 1. Is this rgb or has got led colors

A: This has a Vibrant Color Selection (RGB+W Color Gamut)

Q: 2. what is the maximum throw distance?

A: There is no maximum throw. It relates to how bright you want the light to be in relation to the throw and how wide you need the light to cover.The light can use different wattage bulbs and in combination of the zoom will give you brighter and dimmer light.The photometric on the light can be down loaded at this link http://bit.ly/1Seqefo.

Q: 3. Does it include a tripod as a stand?

A: The Arri S60 does not include a stand.

Q: 4. Can I use 5 feet away from subject for interviews or is the fan too loud?

A: There is some noise, and at 5 ft. away the sound recordist may complain on an interior (minimal), but definitely not on an exterior. I've never had anyone complain.

Q: 5. The product images are identical for the Bare Ends / Pole Operated and Edison / Yoke Mount . What is the exact mounting terminator for each of the two specifications? Are there any other differences than the terminator. As much detail as possible on this would be extremely helpful.

A: The Pole Operated version is for use in studios where adjustment of tilt and pan is done with a pole from the ground. This model comes with a bare ends cord which means there is no power connector at the end of the power cord and customer must supply their own. The Pole Operated yoke has a 28mm (Junior) pin.The standard mount is a regular yoke with a high strength tilt lock and a 28mm (Junior) pin. The Edison refers to the standard American type connector on the power cord.

Q: 6. What's the SSI rating, at tungsten 3200K and at Daylight 5600K?

A: I am sorry Arri does not publish the SSI of the s60C LED.

Q: 7. how many watts

A: 400w equivalent

Q: 8. What kind of controller/dimmer is needed/available for these lights?

A: The SkyPanel S60 has a dial on the back to dim it and it is DMX.Most DMX controllers will work with this light. It is very new and there might be some that are better than others specifically. We are waiting for that information from Arri.

Q: 9. does it come with the case?

A: The ARRI S60-C does not include a case.

Q: 10. there is no interior dimensions listed for this case. Will this fit my Eve 100's?

A: The ProX Road Case for up to 4 ETC Source Four Par and Ellipsoidal Fixtures (Black) BH #PRSSRC4X4W will hold EVE E-100Z lights.

Chadnozza	29/09/2024
[UL cUL] Pop it in the gel frame holder at the front of the light. You'll still be able to use a gel frame in the space behind or in front, or a top hat in front of it (the donut and top hat together really clear up the image), though you can't have all three at once - there's only two slots in the mini's frame holder. 5

Chadnozza	29/09/2024
[UL cUL] Pop it in the gel frame holder at the front of the light. You'll still be able to use a gel frame in the space behind or in front, or a top hat in front of it (the donut and top hat together really clear up the image), though you can't have all three at once - there's only two slots in the mini's frame holder. 5

Chadnozza	29/09/2024
[UL cUL] Pop it in the gel frame holder at the front of the light. You'll still be able to use a gel frame in the space behind or in front, or a top hat in front of it (the donut and top hat together really clear up the image), though you can't have all three at once - there's only two slots in the mini's frame holder. 5

Eric	24/09/2024
[26°] I use this fixture for adding patterns to backgrounds for interviews, etc. It's a workhorse and gets the job done every time. The fixture itself is a little bulky, (far less bulky than the full size) so you are not going to shove this thing in your light kit with LED panels, but it's rugged enough to carry around on its own without worrying about it getting banged up. It couldn't be easier to use, the entire fixture can be loaded with a lamp and adjusted, quickly and without the use of any tools. Set it to 50 and you can fill a large wall from a short distance. I like to tweak the zoom adjustment to soften the projection a bit. The beam is cooler than most other tungsten fixtures at this wattage because of the dichroic reflector, so it doesn't kill your patterns/gels as quickly as other/older fixtures. Grab one of these, a pattern holder (does not come with fixture) and some M-size gobos and you can make a white wall far less boring. 5

Eric	24/09/2024
[26°] I use this fixture for adding patterns to backgrounds for interviews, etc. It's a workhorse and gets the job done every time. The fixture itself is a little bulky, (far less bulky than the full size) so you are not going to shove this thing in your light kit with LED panels, but it's rugged enough to carry around on its own without worrying about it getting banged up. It couldn't be easier to use, the entire fixture can be loaded with a lamp and adjusted, quickly and without the use of any tools. Set it to 50 and you can fill a large wall from a short distance. I like to tweak the zoom adjustment to soften the projection a bit. The beam is cooler than most other tungsten fixtures at this wattage because of the dichroic reflector, so it doesn't kill your patterns/gels as quickly as other/older fixtures. Grab one of these, a pattern holder (does not come with fixture) and some M-size gobos and you can make a white wall far less boring. 5

Chuckesgal	09/09/2024
[UL cUL] Love this light. Came quick. Works great. Be sure to order a light bulb when you order this though, it does not come with one. 5

Chuckesgal	09/09/2024
[UL cUL] Love this light. Came quick. Works great. Be sure to order a light bulb when you order this though, it does not come with one. 5

Christopher	27/08/2024
[UL cUL] This is the ultimate light. A light that literally will do anything you could possibly want, need or ask of a professional light. The only concerns I had before I got my hands on this S30-C was will this be too heavy? and Is this going to be bright enough?. But I am very pleased that it isn't as heavy as I imagined. Putting the power supply on the back of the light does make it heavier but that is optional if you get the accessory that allows you to attach to a c-stand. Light output was very impressive and if I need more I will purchase the Intensifier Panel to get 50% more output. I recommend buying the barn doors since the light really goes everywhere. 5

Christopher	27/08/2024
[UL cUL] This is the ultimate light. A light that literally will do anything you could possibly want, need or ask of a professional light. The only concerns I had before I got my hands on this S30-C was will this be too heavy? and Is this going to be bright enough?. But I am very pleased that it isn't as heavy as I imagined. Putting the power supply on the back of the light does make it heavier but that is optional if you get the accessory that allows you to attach to a c-stand. Light output was very impressive and if I need more I will purchase the Intensifier Panel to get 50% more output. I recommend buying the barn doors since the light really goes everywhere. 5

Christopher	27/08/2024
[UL cUL] This is the ultimate light. A light that literally will do anything you could possibly want, need or ask of a professional light. The only concerns I had before I got my hands on this S30-C was will this be too heavy? and Is this going to be bright enough?. But I am very pleased that it isn't as heavy as I imagined. Putting the power supply on the back of the light does make it heavier but that is optional if you get the accessory that allows you to attach to a c-stand. Light output was very impressive and if I need more I will purchase the Intensifier Panel to get 50% more output. I recommend buying the barn doors since the light really goes everywhere. 5