The white ETC Source Four Jr. 36° 575W Fixture Whitesupports tungsten bulbs up to 575W, runs on 115 VAC, and features bare ends, so you can attach your own power plug. Small in size, the Source Four Jr. is well suited for both large and small venues, and when lamped with a 575W HPL bulb, it compares favorably with larger ellipsoidal lights from other manufacturers. It can accept different bulbs, supporting a maximum of 575W, and it comes with an interchangeable 36° lens tube, and projects a beam with a beam edge adjustable from soft to hard. The fixture features die-cast aluminum construction and has a steel yoke with two mounting positions. The Source Four is well known for its sharp optics and ease of use, and this fixture continues that tradition.

It features anti-reflection-coated optical-quality glass and a borosilicate reflector with a dichroic coating that helps it remove 90% of the heat while reflecting more than 95% of the visible light. Anti-vibration shockmounts are used to secure the reflector and lens tube. The fixture features two accessory slots and a slot for either glass or stainless-steel gobos (patterns). It also features a wide accessory slot suitable for use with motorized pattern devices or an optional iris. It accepts a 6.25" gel frame and has insulated control knobs and a rear handle. You can center your bulb for best results without tools, and once set, changing the bulb does not require recentering.

Interchangeable Lens Tubes    Beam Edge Adjustable Soft to Hard    Die-Cast Aluminum Construction    Rotating Shutter Assembly    Slot for Glass or Stainless-Steel Gobos    Accepts 6.25" Gel Frame    Insulated Control Knobs and Rear Handle    Tool-Free Lamp Centering/Adjusting

• Optimized optical system for improved photometric performance and field uniformity for saturated colors and long throws
• Projector-quality dual aspheric lenses
• Optical glass with advanced AR coatings
• Provides crisp edge definition and high gobo contrast
• Faceted borosilicate reflector with dichroic cold-mirror coating removes more than 90% infrared radiation (heat) and reflects greater than 95% of visible light for an extremely efficient fixture
• Reflector and lenses secured with anti-vibration shockmounts
• Tool-free, positive-locking X, Y, and Z lamp-centering adjustments, unaffected by re-lamping
• Beam edge continually adjustable from hard to soft
• Interchangeable lens barrels permit selection of 26, 36, 50°, as well as 25 to 50° zoom range lens tubes

Related Questions and Answers

Q: 1. Are the touch screens included with the board?

A: Touch screens are not included.

Q: 2. Can this mount on a c stand? Or what is the best way to mount it?

A: You could mount to a light on a c stand. Generally the light would mount to the stand and will have to have a port for an umbrella. This umbrella was designed for use with LED lights. It cannot be used with hot lights.

Q: 3. there is no interior dimensions listed for this case. Will this fit my Eve 100's?

A: The ProX Road Case for up to 4 ETC Source Four Par and Ellipsoidal Fixtures (Black) BH #PRSSRC4X4W will hold EVE E-100Z lights.

Q: 4. Is this a collimated light source?

A: The Negative Supply Light Source Mini is a calibrated light source. It features a high CRI of 97 for color accuracy.

Q: 5. Would this light source cover both 35mm and 6X6?

A: Yes the Negative Supply Light Source Mini will scan 6x6cm negatives which is 2 1/4 Inch negatives. The scanning area is 3.75 x 2.5"

Q: 6. Can a 115V bulb be used in a 120V lamp?

A: Yes, the Sylvania / Osram GLA (575W/115V) Lamp may be used in a light fixture that operates on 120V AC operating voltage.

Q: 7. Can I switch out the lens barrel with an legacy Source 4 ellipsoidal barrel? Are the colorsouce Spot V barrels interchangeable

A: Yes, end-users can swap out extension tubes on the ETC ColorSource Spot V Please see what we have available. https://www.bhphotovideo.com/c/accessories/Lens--Lens-Tubes-for-the-ETC-ColorSource-Spot-V-Black/1736604-REG-87671

Q: 8. How many inches long is the umbrella when folded?

A: Unfortunately, Savage does not list the length of the Savage Translucent Umbrella (36 ) when folded. The best I can list is the packaging dimensions for the umbrella are listed as 30.0 x 3.0 x 1.5 , so I would guess the umbrella is slightly shorter than 30 inches when folded closed.

Q: 9. How would you attach any of the Odyssey PAR lights to a c-stand, like your Impact Turtle Base C-Stand?

A: The Impact Rapid Baby to 3/8" Male Threaded Adapter will let you attach the Odyssey PAR 16 Aluminum Light Fixture (White) to any stand with a 5/8 stud.

Q: 10. what is the maximum throw distance?

A: There is no maximum throw. It relates to how bright you want the light to be in relation to the throw and how wide you need the light to cover.The light can use different wattage bulbs and in combination of the zoom will give you brighter and dimmer light.The photometric on the light can be down loaded at this link http://bit.ly/1Seqefo.