This ATA-300-Style ProX Flight Case with 30x30 Aluminum Trussing Platesoffers a convenient solution for securely storing and transporting the six included ProX XT-BP3030A 30 x 30" aluminum trussing base plates. Built with the company's gig-ready, Signature Series 3/8" plywood, it features heavy-duty, commercial recessed handles and reinforced steel ball corners to withstand the rigors of the road.

Four heavy-duty 4" caster wheels—two with locks—let you roll the base plates from your truck to your setup site with ease across most surfaces. A sleek honeycomb pattern made of hexagon grids adorns all outer shell surfaces. The hard rubber foam used in this case contains 85% recycled materials.

Includes Six 30 x 30" Truss Base Plates    ATA-300-Style Flight Case    Four Heavy-Duty Casters, Two Locking    3/8" Laminated Plywood Construction    High-Density Foam Interior    Reinforced Steel Ball Corners    Heavy-Duty Recessed Handles    Black Honeycomb Exterior Design

• Holds up to six ProX 30 x 30" XT-BP3030A aluminum trussing base plates, included
• ATA-300-style flight case
• Signature Series 3/8" laminated plywood
• High-density foam interior support and casing
• Heavy-duty, recessed spring-action handles on each side
• Reinforced steel ball corners
• Four heavy-duty 4" casters—two locking—roll across most surfaces 
• Industrial-grade rubber feet
• Black honeycomb laminated finish helps prevent minor to mild scratches
• Hard rubber foam interior contains 85% recycled materials

• The six ProX aluminum base plates fit most manufacturers' F34 trussing with conical connectors
• Each plate is made with 10mm AWT6 6082 aluminum and weighs 28 lb

Related Questions and Answers

Q: 1. Will the prime go fit in the case if it has a decksaver on it (plastic cover that goes over the buttons)? It's about 2" tall.

A: No, but you can use the Decksaver when the Prime Go is out of the case and you can remove the Decksaver when traveling with the Prime Go and ProX ASA-style flight case for it.

Q: 2. Will this fit standard mounting brackets (for pole stands) on the rear of the TV?

A: If the mounting brackets are large when using the ProX XS-LCD5570WX2 Flight Case with Casters they will probably need to be removed.

Q: 3. Allen & Heath SQ-5: sticks up a bit. SKB makes alt rack ears to lower & clear their case. Will sliding shelf clear this console?

A: I contacted ProX regarding compatibility of the T-16MRSS13ULT Rackmount Mixer Flight Case with Laptop Shelf, Side Tables, and Casters with the Allen & Heath SQ-5 Digital Mixer, and my concerns about the height in the back. I was told that the height is adjustable on the case and that it will fit, clear the laptop shelf, and also close properly when not in use.

Q: 4. Would this case fit Mackie Thump 15a speakers?

A: The ProX Universal Dual ATA-Style Speaker Flight Case for 15" Speakers (Black), B&H # PRSX281716, has the following interior dimensions for each speaker: 16.8 x 15.8 x 28.0" / 42.5 x 40.0 x 71.1 cm. Because each Mackie TH15A THUMP 400W 15" 2-Way Active Loudspeaker (B&H # MATH15A) measures 16.8 x 27.1 x 15.8" (427 x 689 x 401mm), they should fit in this case.

Q: 5. will a Electro-Voice ZLX-12P Pair of 12" 2-Way Powered 1000W Speakers fit in it?

A: It might be a little tight. ProX does make a case specifically designed for two ZLX12P: https://www.bhphotovideo.com/c/product/1249645-REG/prox_x_ev_zlx12p_ata_style_flight_case.html

Q: 6. does this case fit the v-raptor with the RED V-Raptor Tactical top plate and battery adapter?

A: No, the Jason Cases RED Raptor Case (Tilta Plates) Holds a RED V-Raptor & Tilta Camera Cage with attached Tilta battery plate, as stated in the key features.

Q: 7. Will it fit a Yamaha DM3?

A: Yes, the ProX T-16MRSS13ULT Rackmount Mixer Flight Case will hold the Yamaha DM3 Digital Mixing Console when using the Yamaha RK-DM3 Rackmount Kit for DM3S and DM3-D Digital Mixers (B&H #YARKDM3), which will fit in the top 13 RU rack.

Q: 8. How many of the casters lock?

A: Two of the casters have locks.

Q: 9. Does this fit the Nexo PS15 ?

A: The ProX XS-2X281716 Universal Dual ATA-Style Speaker Flight Case for 15" Speakers specifies internal compartment dimensions of 17" x 16" x 28", and ProX advises that to be certain, the dimensions of the speakers should be less than 16.75" x 15.75" x 28". In this scenario, the NEXO PS15 Passive Speaker would be slightly too large for this case, with dimensions measuring 26.63" x 17.13" x 14.5". The speaker's width dimension is slightly too large.

Q: 10. When you say "80 inches" does is that a horizontal measurement across the screen or is this the actual width of the screen?

A: The size is based off the diagonal size of the screen. When you purchase a screen it has a specific screen size like this 77" model. https://bhpho.to/3GZZhuX