Prox Flight Case For 36X36" Trussing Base Plates

Prox Flight Case For 36x36" Trussing Base Plates

Product Code: eq74255
Availability: In Stock

$1,499.97 $2,324.95

Qty

12 reviews Write a review

Description
Reviews (12)

This ATA-300-Style ProX Flight Case for 36x36" Trussing Base Platesoffers a convenient solution for securely storing and transporting six ProX XT-BP3636A 36 x 36" aluminum trussing base plates. Built with the company's gig-ready Signature Series 3/8" plywood, it features heavy-duty commercial recessed handles and reinforced steel ball corners to withstand the rigors of the road.

Four heavy-duty 4" caster wheels, two with locks, let you roll the base plates from your truck to your setup site with ease across most surfaces. A sleek honeycomb pattern made of hexagon grids adorns all outer shell surfaces. The hard rubber foam used in this case contains 85% recycled materials.

Holds Six 36 x 36" Truss Base Plates ATA-300-Style Flight Case Four Heavy-Duty Casters, Two Locking 3/8" Laminated Plywood Construction High-Density Foam Interior Reinforced Steel Ball Corners Heavy-Duty Recessed Handles

Parameters
Compatibility	6 x XT-BP3636A Trussing Plates Each Plate: 36 x 36" / 91.4 x 91.4 cm
Material	0.375" / 9.5 mm Signature Series Plywood Reinforced Steel Ball Corners High-Density Foam
Carrying / Transport Options	Heavy-Duty Recessed Handles 4 x 4" Casters (Two Locking)
Dimensions	Interior: 36.0 x 16.0 x 36.0" / 91.4 x 40.6 x 91.4 cm Exterior: 36.5 x 17.0 x 37.0" / 92.7 x 43.2 x 94.0 cm
Weight	88.0 lb / 39.9 kg
Packaging Info
Package Weight	112 lb
Box Dimensions (LxWxH)	40 x 38.25 x 19"

Holds up to six ProX XT-BP3636A 36 x 36" aluminum trussing base plates (available separately)
ATA-300-style flight case
Signature Series 3/8" laminated plywood
High-density foam interior support and casing
Heavy-duty, recessed spring-action handles on each side
Reinforced steel ball corners
Four heavy-duty 4" casters—two locking—roll across most surfaces
Industrial-grade rubber feet
Black honeycomb laminated finish helps prevent minor to mild scratches
Hard rubber foam interior contains 85% recycled materials

Related Questions and Answers

Q: 1. Does this fit the Nexo PS15 ?

A: The ProX XS-2X281716 Universal Dual ATA-Style Speaker Flight Case for 15" Speakers specifies internal compartment dimensions of 17" x 16" x 28", and ProX advises that to be certain, the dimensions of the speakers should be less than 16.75" x 15.75" x 28". In this scenario, the NEXO PS15 Passive Speaker would be slightly too large for this case, with dimensions measuring 26.63" x 17.13" x 14.5". The speaker's width dimension is slightly too large.

Q: 2. Electro-Voice ETX-12P 2000W 12 inch Powered Speaker will this case hold two of these?

A: No, the ProX XS-2X12-SPW ATA Flight Case for Two 12" Speakers is not compatible for use with the Electro-Voice ETX-12P Powered Speakers.

Q: 3. Will this fit standard mounting brackets (for pole stands) on the rear of the TV?

A: If the mounting brackets are large when using the ProX XS-LCD5570WX2 Flight Case with Casters they will probably need to be removed.

Q: 4. Will these fit standard mounting brackets on the rear of the TV (such as Chief or other similar brackets)?

A: The ProX XS-LCD5570WX2 Flight Case with Casters for Two 55 to 70" Flat-Screen TVs (Black/Silver) is listed only to accommodate 2 x 55" to 77" flat screen TVs. If the mount exceeds the space, they will need to be removed.

Q: 5. Will it fit a Yamaha DM3?

A: Yes, the ProX T-16MRSS13ULT Rackmount Mixer Flight Case will hold the Yamaha DM3 Digital Mixing Console when using the Yamaha RK-DM3 Rackmount Kit for DM3S and DM3-D Digital Mixers (B&H #YARKDM3), which will fit in the top 13 RU rack.

Q: 6. How many of the casters lock?

A: Two of the casters have locks.

Q: 7. What is the maximum load the Kirk QRC-1 is designed/able to hold securely? Can I attach a Nikon D4 with a 70-200/2.8 lens to it?

A: I haven't had the specific configuration you have. I used it for a Nikon D750 with a 200-500 f5.6 without any problem.

Q: 8. Will the prime go fit in the case if it has a decksaver on it (plastic cover that goes over the buttons)? It's about 2" tall.

A: No, but you can use the Decksaver when the Prime Go is out of the case and you can remove the Decksaver when traveling with the Prime Go and ProX ASA-style flight case for it.

Q: 9. How big are the individual squares for the stands? like 1 stand goes into a hole that is how large by how long by how deep?

A: Each compartment within the ProX ATA 300-Style Flight Case with Casters for 25 Microphone Stands measures 4.25" x 4.25" x 38".

Q: 10. Will this fit a Yamaha QL1?

A: The ProX Rackmount Mixer Flight Case with Laptop Shelf, Side Tables, and Casters will not fit a Yamaha QL1.

Popken	29/09/2024
[112 lb] I waited a very long time because it was on backorder but am glad I waited. It holds all my mic stands and a few speaker stands and is sturdy enough that I can stack my cable cases on top for easy load in and load out. It fit my trailer nicely too. I hated the stands always falling off the top of cases or the bags with the broken zippers. It is not light weight, but neither is the hardware that goes inside, di I think I’ll last a long time. 5

Ararat	25/09/2024
[112 lb] iteam was as described. 5

Earl	01/09/2024
[112 lb] Excellent case. Fast ship. Fits the line arrays nicely.has double locking casters. Good quality product. Very happy with everything. Highly recommend 5

Earl	01/09/2024
[112 lb] Excellent case. Fast ship. Fits the line arrays nicely.has double locking casters. Good quality product. Very happy with everything. Highly recommend 5

Jason	17/07/2024
[112 lb] It has made dealing with awkward 30 base plates so much easier to store and transport. Roll in 6 at a time without bumping them into walls! 5

James	08/06/2024
[112 lb] Fast Shipping, all i had to do was unbox, put the wheels on and load the case. The cabs fits great and has lots of protection. 5

James	08/06/2024
[112 lb] Fast Shipping, all i had to do was unbox, put the wheels on and load the case. The cabs fits great and has lots of protection. 5

David	27/05/2024
[112 lb] For a case made in China, this is still a really good quality build. While it's made for the Midas M32R, I purchased it for the Allen & Heath SQ-5 (it's a nicer board than the M32R for a whole host of reasons) because I wanted a foam lined case, not a hard rack rail and I haven't been able to find any other manufacturer making the case to accommodate the SQ-5. This case will do it with a little work, which is what I expected. Remember to save your Allen & Heath packing foam, then see my attached photo for details on how to make a SQ-5 fit nicely into this unit. Perhaps ProX will make an SQ-5 case as soon as that mixer gains popularity. Until then, my modification is really nice. (Note: out of the box, this ProX case looks like it will fit the M32R without any modifications.) 5

David	27/05/2024
[112 lb] For a case made in China, this is still a really good quality build. While it's made for the Midas M32R, I purchased it for the Allen & Heath SQ-5 (it's a nicer board than the M32R for a whole host of reasons) because I wanted a foam lined case, not a hard rack rail and I haven't been able to find any other manufacturer making the case to accommodate the SQ-5. This case will do it with a little work, which is what I expected. Remember to save your Allen & Heath packing foam, then see my attached photo for details on how to make a SQ-5 fit nicely into this unit. Perhaps ProX will make an SQ-5 case as soon as that mixer gains popularity. Until then, my modification is really nice. (Note: out of the box, this ProX case looks like it will fit the M32R without any modifications.) 5