The StabiLens Cinematographer Kit - Camera Stabilizeris the core of the StabiLens counterbalance system. Along with supported StabiLens counterweights and an additional clamp, both sold separately, the ring is designed to let you pre-balance a lens on a motorized handheld gimbal, so you can swap the lens in during a shoot without having to spend time balancing it. This way you can save time as well as be able to jump on an important moment that comes up during a live event or other shoots.

Featuring a very durable rubber design that's built to last, the ring accepts counterweights in its 20 counterweight slots and attaches to your lens or lens hood. The choice between attaching to a lens or lens hood depends on whether your lens provides the space for it as well as other factors (see more about this in the StabiLens Starter and Cinematographer Kit descriptions). The optional weights are to be inserted into the slots based on your balance requirements. In some cases, you would only need to insert a few weights on one side of the ring while in other cases you may need more or fewer weights in the same or different position.

If you'd like to pre-balance multiple lenses for a shoot, you can purchase a separate ring for each lens, pre-balance the lens, and keep the ring attached on it so you can just swap in the lens during production.

Pre-Balance 2 Lenses for Your Gimbal    2 x StabiLens Gimbal Lens Rings    20 x 12g and 20 x 5g Counterweights    Motor Arm Clamp; Compact Hard Case

Related Questions and Answers

Q: 1. Do I have to buy some extra accessory to use?

A: If you want to mount a v-mount or other type of battery, you'll need to buy a plate adapter. The one that comes with this is just a cheese plate attached to rail adapters. Otherwise, I'd suggest a 1.5-2 foot HDMI cable if you're planning on mounting a monitor below. And I highly suggest some velcro cable ties to keep all of your cables from shifting around and throwing off your balance.

Q: 2. Does the hdmi and sdi inputs at the top of the sled transmit 4K footage from the camera to a 4K monitor/Recorder attached to the monitor mount?

A: The capability of the SDI cable is not known. However, for such a short distance, I think it has a good chance to work. You may have to run a new cabling however.

Q: 3. It' s can use with camera Panasonic AK-HC 3500?

A: That will depend on the lens and other accessories used with the camera, however it is possible. The CAME-TV Pro Camera Carbon Stabilizer has a load capacity of 33 pounds, which should leave you room for such a large camera.

Q: 4. You guys buy used equipment

A: We do have a department that purchases used equipment. Please visit the following web link to find out more. https://bhpho.to/2TiNEFY

Q: 5. would a Pansonic AG-CX350 balance well on this unit? The weight is 4.19lbs, I assume the heavier the better it handles on stabilization?

A: This has a 6.6 pound load capacity, so it is possible. However we would tend to recommend something like the B&H # FLCMRK for a camcorder the size of the CX350. You will have better results with this we feel. https://bhpho.to/3m6Vw9a

Q: 6. Is this glidecam only for 10 lb cameras?

A: i've seen people using this with gopros, which is probably around 1lb

Q: 7. How well will this balance a Canon 5D Mk III with the 24-105mm lens?

A: It should balance that combination well. This stabilizer has a 6.6 pound load capacity, and the combination of 5D Mark III and 24-105mm is under 3.5 pounds.

Q: 8. How can I download the manual?

A: According to CAME-TV, they do not have a manual however they suggest using on the instruction video on the CAME-TV web site. They add that if you have any question or problem to contact them directly. americas@came-tv.com

Q: 9. Does it come with the screws?

A: The Merlin camera screw is a separate item # 801-7436https://a href= http://www.bhphotovideo.com/c/product/422584-REG/Steadicam_801_7436_8017436_Replacement_Camera_Mounting.html target= _blank www.bhphotovideo.com/c/product/422584-REG/Steadicam_801_7436_8017436_Replacement_Camera_Mounting.html/a

Q: 10. Will this Stabilizer work with a SONY xcam video camera? The weight isn't the issue, about 6 lbs just the mounting plate really.

A: The Flycam 3000 Video Camera Stabilizer can work with payloads of up to 7.5 lb. You may also want the following vest and arm option to assist with the heavy payload: the Flycam Comfort Arm Vest Support for Camera Stabilizers (B&H # FLCMFTAV).