Looking to sync your equipment? Check out the Camvate Right-Angle BNC to Right-Angle 3.5 mm Mini Jack Timecode Cable, which is used to feed or accept a timecode signal between Tentacle Sync timecode generator and a device with a BNC TC in/out port. The cable features a right-angle, 3.5mm Neutrik mini-TRS jack connector and a right-angle standard BNC connector.

For C300/500, f55, Amira, Zoom F8    Right-Angle BNC    Right-Angle 3.5 mm    18" in Length

• Right-angle 3.5mm mini-TRS jack
• Standard right-angle BNC connector
• 18" lenght
• For C300/500 f55/ Amira / zoom F8

Related Questions and Answers

Q: 1. Is this compatible with the Lumix BGh1 cameras? The camera I have isn't receiving the timecode signal.is it the camera or the cable?

A: Yes, the Tentacle Sync C08 Tentacle to BNC Cable can be used to feed timecode signal from a Tentacle Sync timecode generator into the BNC timecode input on the Panasonic Lumix BGH1 Box Cinema Camera.

Q: 2. Will this cable work for zoom f6 timecode with track e?

A: Yes, the Tentacle Sync Tentacle to DSLR 3.5mm Mini-Jack Cable could be used to send timecode signal between the Tentacle Sync TRACK E and the Zoom F6 Multitrack Field Recorder.

Q: 3. Can this be used to transmit timecode from the Denecke JB-1 to the Lectrosonics MTCR?

A: Yes, you can use the Kondor Blue BNC to 5-Pin LEMO-Type Right-Angle Timecode Cable to sync timecode from the Denecke JB-1 to the Lectrosonics MTCR.

Q: 4. Will this work with the time code output at the canon c70? thanks

A: Yes, the Tentacle Sync Tentacle to BNC Cable is a bidirectional cable that can be used to take timecode out of or into the Canon EOS C70 Cinema Camera's timecode connection.

Q: 5. Can I use this to jam the blackmagic video assist 5 inch 12g?

A: No, the Deity Microphones C15 Right-Angle Locking 3.5mm TRS to Right-Angle BNC Timecode Cable is intended for use with the Deity Microphones TC-1 Wireless Timecode Generator Box (B&H # DEDTT0272D80) which uses a locking 3.5mm connector. The BNC connector would be for connection to the timecode input on the device that you are connecting to. The Blackmagic Design Video Assist 5" 12G-SDI/HDMI HDR Recording Monitor has a non-locking 3.5mm audio input, so if you are jamming timecode to the audio input you need a cable that has a non-locking 3.5mm TRS connector. If you are feeding timecode from a device with BNC timecode output, you can use the Tentacle Sync Tentacle to BNC Cable - Right-Angle, 16" (B&H # TEC08) or the Tentacle Sync Tentacle to BNC Cable - Straight, 16" (B&H # TEC06).

Q: 6. Can it work with any timecode box?

A: The Tentacle Sync C07 Tentacle to DSLR 3.5mm Mini-Jack Cable is designed to send timecode from a Tentacle Sync timecode generator to any DSLR camera or recorder that includes a 3.5mm TRS input jack. This cable should also work with other timecode generators that use a 3.5mm TRS timecode output connection to send timecode to a camera or recorder that has a 3.5mm TRS input.

Q: 7. is this line or mic level?

A: This cable is a balanced cable designed primarily for mic connection, however is able to handle mic or line level signal. The Red EPIC however is designed to accept mic level inputs.

Q: 8. Is this cable bidirectional? Can it be used to send timecode OUT from TC1 to Ext, as well as Timecode IN from Ext to TC1?

A: The Deity Microphones TC-1 Wireless Timecode Generator Box cannot send and receive timecode at the same time via the Deity Microphones C15 Right-Angle Locking 3.5mm TRS to Right-Angle BNC Timecode Cable.

Q: 9. This is for connecting my pocket wizard to my Profoto light. I usually use the PocketWizard MM1 Flash Sync Cable Mono Miniphone to Mono Miniphone but they are back-ordered. Will these work?

A: This Tentacle Sync Tentacle to DSLR 3.5mm Mini-Jack Cable (Right Angle 12") BH #TEC07 is a stereo TRS cable and is not electrically configured like a mono TS cable would be. Here is a 16" flash sync cord cable: Nisha Miniphone 1/8" (3.5mm) Male to Miniphone 1/8" (3.5mm) Male Sync Cord (16") B&H # NIFSC163535 MFR # FSC163535

Q: 10. Will this work with a different brand of TC Generator like Ultrasync One?

A: yes no problem it will work with any brand equipment that requires that specific connection.