The white Marshall CV630-IPW 4K UHD IP PTZ Camera (White)from Marshall CV630-IPW 4K UHD IP PTZ Camera (White)is designed for professional conferencing applications. Its 8MP sensor captures up to 2160p UHD 4K resolution with a lens with 30x optical zoom from 4.6 to 135mm and a 70° angle of view. Connectivity features include 3G/HD-SDI and HDMI outputs and RJ45 Ethernet streaming and RS-232 serial control.

Stream video using H.265 and H.264 compression over IP for high-quality streaming with the RJ45 Ethernet port, and control the unit using IP, RS-232, or RS-422 with Visca, Pelco, and Onvif support. The camera is built with smooth and quiet 340° pan, 120° tilt, and it offers simultaneous PTZ and focus control for advanced transitions.

Up to UHD 4K Resolution    8MP 1/2.5" Sensor    30x Optical Zoom, 70° Angle of View    Ethernet, 3G/HD-SDI, and HDMI Outputs    35mm Equivalent 4.6 to 135mm Lens    IR Remote Select

• 8MP 1/2.5" sensor
• Capture UHD 4K 3840 x 2160p
• 30x optical zoom
• 4.6 to 135mm lens
• 3G/HD-SDI and HDMI outputs
• RJ45 Ethernet streaming control, PoE support
• Wide 70° angle of view
• Simultaneous 4D control for pan, tilt, zoom, and focus
• 340° horizontal pan, 120° vertical tilt
• Mountable on desktop, wall, ceiling
• Compatible with most integrated video management systems
• Kensington lock port
• Video resolution and frame rate select dial
• IR remote select
• Adjustable white balance, exposure, iris, gamma, black level
• Standby LED indicator

Related Questions and Answers

Q: 1. Does B&H sell the fiber output module? I cant find it on the website.

A: Yes we sell Fiber Optical Modules. Panasonic does not make one themselves at this time but it is compatible with any SFP+ Fiber Optic Module. An example of one is the Ubiquiti Networks UF-MM-10G SFP+ Multi-Mode Fiber Module (2-Pack) BH #UBUFMM10G • MFR #UF-MM-10G

Q: 2. Can this be mounted on a studio boom stand?

A: Yes, but proper hardware is needed Please review the following in order to do so Impact Rapid Baby to 1/4"-20 Male Threaded Adapter https://bhpho.to/3sZKZkM

Q: 3. Can this be tripod mounted?

A: The camera can be mounted on a 1/4”, -20 UNC PTZ tripod deck by using the lock holes on the bottom for the tripod. https://marshall-usa.com/pdf/CV630-IP_Manual.pdf (pg. 10)

Q: 4. What is the nominal operating wattage for these camera for PoE operation?

A: For the Marshall Electronics CV630-NDIWm, we would suggest the PoE nominal operating wattage is 24w. (from 12v x 2a.)

Q: 5. What is the maximum power consumption for this device?

A: Industry standard for AC/DC adapter or PoE.

Q: 6. what type of shutter it have? what the name of sensor is?

A: This is a CMOS sensor and has a rolling shutter

Q: 7. Does the SFP+ 14g fiber out carry genlock and PTZ control or just video? Is there a breakout box for the receiving end?

A: Take a look at The AJA 1-Channel Single-Mode LC Fiber to 12G-SDI Receiver B&H # AJFIDOR12G MFR # FIDO-R-12G linked below. This unit will carry control and genlock for this PTZ camera https://www.bhphotovideo.com/c/product/1365516-REG/aja_fido_r_12g_1_channel_single_mode_lc_fiber.html

Q: 8. I see that the camera uses rs-422 protocol for joystick control. One of the main issues with Panasonic cameras is their joysticks requires two hands to use. The Sony joysticks are far superior because they only require one hand which allows you contol ptz with one hand and switch with your other hand. Will a Sony joystick like the rm-br300 control this cam? Not sure if all rs-422 functions/pinout assignments are the same between competing companies.

A: The following unit can be driven by any Control offering Protocols of RS-232 RS-422 Just keep in mind when using a proprietary controller you are gaining full access and features the PTZ unit has to offer.

Q: 9. Can the ptz functions work over sdi with black magic camera controls?

A: No it is not capable of being controlled over SDI cables. This camera is only capable of receiving commands via IP (RJ45/Cat 6 cables), RS232, or RS422.

Q: 10. How many watts of POE power does this unit require if powering the camera using this option?

A: The Panasonic AW-UE160 UHD 4K 20x PTZ Camera (Black) complies with IEEE 802.3bt an Ethernet standard that provides up to 90 W of power.