The Comica SIG.LAV V03 Lavalier Mic for DSLR & Smartphonesis an omnidirectional lavalier microphone that lets you record clear and accurate speech directly to your DSLR/mirrorless camera and audio recorder, while monitoring your sound. It can also be used with an iPhone/Android smartphone/tablet that's equipped with a headphone jack.

The 20' cable features an in-line module with a clip for attaching it to your belt. The module houses a 3.5mm audio output that enables you to plug a set of headphones for real-time monitoring of the mic. There is also a dedicated switch that toggles between camera and phone output modes, switching the output of the mic to either 3.5mm TRS or TRRS.

The SIG.LAV V03 features an omnidirectional pickup pattern that captures sound from every direction, allowing for a variety of placement options and freedom of movement—even when the subject turns away from the mic.

The microphone is powered via a CR2032 battery. The metal construction offers shielding from radio frequency noise and a foam windscreen is provided to protect against wind noise.

For Mobile Journalist, YouTuber    Clip-On Mic for iPhone, Android & Camera    Omnidirectional Pickup Pattern    Headphone Jack for Real-Time Monitoring

Related Questions and Answers

Q: 1. Does it work with iPhone 12 since it has no jack port?

A: Yes it does work with a iPhone 12 all you need is the apple adapter from 3.5mm (jack) to Lightning connection. https://www.bhphotovideo.com/c/product/1280795-REG/apple_mmx62am_a_lightning_to_3_5mm_headphone.html

Q: 2. Sound-wise would this be as good as a 77B? That is, if I don't need the smaller profile of the 77B would this 44B sound as good?

A: The main difference between the ECM 77B and 44B other than physical size, would be the frequency response. The 77B extends lower than the 44B, however generally for speech and broadcast applications those would be rolled off. If size is of no importance, the ECM 44B is a fine choice and very popular in broadcast applications.

Q: 3. Does it work with iPhone 11 ?

A: Yes. This kit would be compatible with the iPhone 11

Q: 4. Will this mic work with Scarlett Focusrite 2i2?

A: Yes, the microphone will work with the interface. However, please note: battery power only, does not accept phantom power.

Q: 5. Will this work with a lightning adapter on an iphone 11?

A: By using the included TRRS adapter from Comica, this will work with an iPhone when being attached to a lighting to headphone jack adapter.

Q: 6. Can you use this on a DSRL?

A: The Comica Audio CVM-WS50H Wireless Handheld Microphone Bundle for Smartphones will not be able to connect to a DSLR with the included 3.5mm TRRS cable. A TRS to TRRS adapter, such as the Kopul MC-TRRSA 3.5mm TRRS Female to Right-Angle 3.5mm TRS Male Adapter Cable (B&H # KOMCTRRSA), would be required.

Q: 7. Hey! I have a Sennheiser MD 46 dynamic microphone. Do you know if the preamps in the linkflex-ad2 are good enough to use with this dynamic microphone? I would like to use the linkflex to connect the MD 46 to an iPhone (and possibly my good old Zoom H2). Would that work?

A: The Linkflex specs show up tp 20dB of gain. which may be enough gain, depending on your subjects volume level. One question is, how much electronic noise will be added to the signal? Another question is, how will the MD46 sound if you must turn the Linflex up to full level on its level control. A big part of how a microphone will sound, is the impedance of the mic pre (the Linkflex) amplifier. The noise spec is not listed in the spec sheet, so I would be weary of this. It may be a lot to include, but this is the reason these; Cloudlifter CL-1, are included in the signal chain with dynamic mics, to improve, not only gain, but performance... Comica Specs: Comica Audio LINKFLEX-AD2 Specs General In-Line Accessory Type Pre-Amplifier Gain Up to +20 dB Connectivity I/O 1 x 1/8" / 3.5 mm TRRS Male Output 1 x 1/8" / 3.5 mm TRS Female Headphone Output 1 x Combo XLR-1/4" TS Female Mic/Hi-Z Input Performance Frequency Response 20 Hz to 20 kHz ±1 dB THD+N 0.02% (2-Kilohm Load) '

Q: 8. Is it work for Samsung s 20 altra phone

A: This wireless handheld systems will work with a Samsung Galaxy S20 Ultra smartphone, but would require an adapter, such as the iLuv USB Type-C to Stereo 3.5mm TRRS Headphone Adapter with DAC, BH #ILI115ADBK.

Q: 9. what is the length of the cable? since in amazon you can pick and choose but here it has a B after the name, that is confusing

A: Approximately 10 feet in length.

Q: 10. Hi! I would like to connect a XLR 48v phantom power mic to my Gh5S for better sound. Would this item work for that???

A: Yes, this is designed for exactly that use.