The Cre8audio NiftyCASE is a portable powered 84 HP Eurorack case with MIDI to CV conversion capabilities. The unit's flying busboard can power up to 10 modules, providing industry-standard power with over 1500mA of +12V, 500mA of -12V, and 500mA of +5V.

The case can convert MIDI inputs to CV, gate, modulation, and clock information, allowing you to integrate your modular rig into your DAW/MIDI system. The top of the unit features both USB and DIN MIDI inputs, with the converted signals showing up on standard 3.5mm outputs located on the front of the rack. The CV 1 and Gate 1 outputs respond to MIDI channel 1, while CV 2 and Gate 2 respond to MIDI channel 2. If you play a chord on MIDI channel 3, the lowest note is sent to CV 1 and Gate 1, while the highest note is sent to CV 2 and Gate 2 (single notes are sent to both outputs simultaneously). Modulation information sent from your MIDI keyboard is converted and sent to the Mod output. MIDI clock information sent to the NiftyCASE is converted to 1/8 note triggers on the Clock output.

The NiftyCASE offers two 3.5mm audio inputs on the front panel which are summed to the 1/4" output on top. The top of the unit also features the power input for the included wall-wart power supply, the power button, and a DIN MIDI Thru port.

Portable Case with 84 HP Width    +12V, -12V, and +5V Power for Modules    Converts MIDI to CV, Gate, Mod & Clock

Related Questions and Answers

Q: 1. Does this work with the Yamaha DGX-300?

A: The Art MConnect USB MIDI cable is compatible with the Yamaha DGX-300.

Q: 2. Is the MPC II powered by bluetooth or usb? Or am I required to have a power source to power the device?

A: Hi, power choices are the included power adapter or the internal re-chargeable battery, not USB or bluetooth. Thank you for shopping at B&H!

Q: 3. Can the MPC II stream multiple tracks via USB into Ableton?

A: This is a stand-alone music producton workstation, but you can record into the MPC 2.0 software, and then exporting the files individually into Ableton. If you only have a few tracks, you can use the MPC 2.0 software as a plugin to Ableton.

Q: 4. Is this cable Korg compatible? Arturia compatible? If not, what is?

A: Yes. Compatible provided the Korg and/or Artiria have 3.5mm MIDI connectors. Elektron 121007 Overview Owners of the Model:Samples and Model:Cycles who are looking to connect their machines to other MIDI devices will be delighted with the pair of Elektron CA-3 MIDI Adapters. Each adapter provides a 3.5mm to 5-pin DIN connection. Simply plug into the 3.5mm MIDI ports and connect a MIDI cable to another MIDI device such as an additional Model machine, MIDI interface, synthesizer, or drum machine.

Q: 5. Is the MIDI end of this cable male or female?

A: The MIDI connections on this adapter cable are female.

Q: 6. This is the second time, the mic is not working properly, I got really low volume signal. The first time it was fixed by itself after a few days but not this time, how can I use the warranty? This microphone was a birthday present and I don't have the invoice

A: Aventone microphones carry a five-year warranty when purchased new. Tel: (845) 642.3697 or info@avantonepro.com However, I would encourage you to give us a call as we may be able to help trouble shoot the mic, and determine whether or not it truly defective. 800-606-6969

Q: 7. Can I engrave a brick with this?

A: The Creality Falcon2 CV-50 22W Laser Engraver & Cutter cannot engrave a brick. You can engrave the following: Wood, Metal, Cardboard, Bamboo, Rubber, Leather, Fabric, Acrylic, and Plastic.

Q: 8. How do you convert the controller for fiber use?

A: So you need to convert both the sdi signal and data signal to a fiber signal. I prefer using a Thor 1-Channel Mini HD-SDI Single-Mode Fiber Optic Extender Kit for each Marshall Camera, but that is just me. It mux’s both signals to one fiber and demux’s at the other end. Hope this helps. Good luck!

Q: 9. how do i swap tube in CV 12. is there a quick way without ant unscrewing?

A: You are not able to remove the tube of the CV-12 without some disassembly. Unfortunately we are not able to provide detailed instructions.

Q: 10. " . . .select popular cameras from other brands." Does that list include the Canon C300 MK II?

A: Not that we are aware of. This product is not compatible with the C300 Mark II.