The Rycote Mini Windjammer for Rode VideoMic NTGis a slip-on fur cover designed to greatly reduce wind noise when shooting outdoors.

The windjammer slips on the foam windscreen that's included with the VideoMic NTG, providing a precise and snugly fit that helps isolate the mic from the elements.

The high-quality synthetic fur preserves the characteristics of your sound with virtually no adverse effect on high frequencies.

Wind Protection for Rode VideoMic NTG    Slips over the Mic Foam Windscreen    Preserves Sound Quality

Related Questions and Answers

Q: 1. Is there a case included with the mic?

A: No

Q: 2. If I run this as a computer mic, will it constantly charge and be bad for the microphone's battery or will it run off usb power separately?

A: The mic will run on USB bus power when connected to a computer, and not effect the charging of the internal battery.

Q: 3. Does this fit over the regular foam windscreen included with the mic or is made with the foam integrated with the furry similar to the rode videomicro's? Thanks!

A: This has open-cell foam inside to go right over the VideoMic NTG specifically.

Q: 4. You show the "dead cat" wind screen in the photos, does this come with both the foam and dead Cat, or is it a mistake showing the dead cat?

A: This comes with the foam windscreen only, the dead cat is not included. BH #ROWS11 is the Rode Fur Windshield for VideoMic NTG Mic. https://bhpho.to/2vQboIr

Q: 5. With the Rode SC-15 Cable, does it have a (female) 5mm socket to connect the output of the mike toward the lightning plug? i.e. Sennheiser MKE 600 to Apple smartphone.

A: The SC-15 cable has a Male USB-C to Male Lighting connector. This cable is used to connect the USB-C output of the mic to the lightning connection in on an iOS device.

Q: 6. The spec says it fits mics 1.9" Diameter but I think it's wrong. What's the actual diameter it fits?

A: The Rycote Mini Windjammer Special 90 is specifically designed for use over a foam windshield of 50 mm diameter and 90 mm long. The 1.9" diameter mentioned in the product description is actually in reference to the diameter of a compatible foam windscreen (50mm = 1.9").

Q: 7. Would this work over the Sennheiser MZW 64-PRO Foam Windscreen? If not, is there another slip over Windjammer that would?

A: The Rycote Special 90 Mini Windjammer (BH # RYMWS90) is too small to fit the Sennheiser MZW 64-PRO Foam Windscreen (Black), BH # SEMZW64P. The WindTech Mic-Muff Microphone Windshield MM-8 (BH # WIMM8) is recommended.

Q: 8. I would like to use Rode Videomic NTG with wireless go. Be it for interview or for podcast. How to connect NTG with wireless go (either on a table or on hand)?

A: You could connect the cable from the NTG mic into the 3.5mm of the Rode Wireless Go transmitter, and make this shotgun mic wireless. For handheld use, I would recommend the Rode PG1 - Pistol Grip Shock Mount for Shoe Mounted Microphones, BH #ROPG1 and the Vello V-Rig 4.1" Triple Shoe Bracket BH #VECB415.

Q: 9. Would this fit the Sony ECM XM1 microphone?

A: The WS11 windshield is specifically designed to fit the Rode VideoMic NTG which has a 21.6mm diameter and is 171mm long. The Sony ECM-XM1 has a 21mm diameter and is 162mm long. It is possible that the WS11 may fit the ECM-XM1, but we have not tested it with the Sony mic to be able to confirm that it will fit correctly. Rycote makes the Rode windshields and they list the Rycote Mini Windjammer Special 105 (B&H # RYMWS105) and the Rycote Standard Hole Softie Windscreen with 19-22mm (0.74-0.87") Hole Size (B&H # RYS10M) as the compatible models to use with the ECM-XM1. As another compatible option, you can use the Auray WSR-2012 Stuffed Rabbit Windscreen for Shotgun Microphones - 12 cm (B&H # AUWSR201).

Q: 10. Does the plug-in power from camera actually power the mic even after the mic battery dies?

A: This microphone will not use Plug-in power, but the battery expectancy is 30 hours, and you can charge while you use it. So, if you have a backup USB battery pack that can be used in the field.