The tan Countryman E6 Omnidirectional Earset Mic, Medium Gain, 2mm Cable, Hirose Connectoris a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a 6-pin Hirose connector for direct connection to Samson BT3, CT2, TX4, and UT4 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Samson Transmitters    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Does this work on Senheiser ew100 G2 and G3?

A: Yes, the Saramonic SR-M1 can be used with Sennheiser transmitters.

Q: 2. Is this compatible with the NP-L7S type battery? Trying to power my soundevices 664. I'm not sure the cup is big enough to fit the NP-L7S. Any help is much appreciated. Thanks

A: The PSC battery cup will support an NP-L7S battery.

Q: 3. Does the windscreen come off?

A: Yes, the windscreen can be removed from the Saramonic SR-M1 Omnidirectional Lavalier Microphone Cable with 3.5mm TRS Connector (Black).

Q: 4. Will this work with a Rode go system?

A: This microphone is designed to connect directly to the lightning port of your iPhone or iOS device. It will also connect to the RODE Wireless GO transmitter. NOTE: Multi-Section, Multi-Use Cable: The cable is made of two sections: a first section with the lav mic at one end and a 3.5mm TRS female connector at the other, and a second section with a 3.5mm TRS male connector at one end and an MFi Certified Lightning connector at the other. This two-section cable facilitates multiple purpose. Use the first section of the cable to route the mic into iOS devices that still offer conventional 3.5mm jacks. Conversely, the second section can be used to connect either the lav mic or any audio device with a 3.5mm TRS output (including wireless receivers and media players) to your iPhone or iPad.

Q: 5. Does this mic work with iPhones or MacBook laptops?

A: No. The Movo Photo uLav is made for compatibility with Android smartphones and Android tablets.

Q: 6. Will this cable work with the Sony FS5 or FS7? Power and start/stop still fully functional?

A: I'm afraid not. This cable is designed for cameras like the Sony F5 which has a 4 Pin Hirose connection on the camera itself. The FS5 and FS7 do not have such connections. To connect B4 lenses to the FS5 and FS7 first you will need a B4 2/3 to E-Mount adapter. To power the lenses a better suggestion would be a D-Tap to 12-Pin Hirose Cable. You'd just need a battery source with a D-Tap connection. SWIT makes S-8U93 BP-U battery, which is compatible with both the FS5 and FS7 and it offers a D-Tap power connection.

Q: 7. Does it work with rode wireless go II? As I know not every lav mic with Rode wireless go II.

A: Yes, the Saramonic SR-M1 Omnidirectional Lavalier Microphone Cable with 3.5mm TRS Connector will work with the Rode Wireless GO II transmitter units.

Q: 8. Is this wired for and will it work to power a smallhd ac7 from a Sony f5

A: I'm using this to power up my lectrosonics transmitter via battery bud with a NP-1 battery.If your F5 has an external power source and has a hirose plug for that job, than yeah ot should be able to power up a small ac7

Q: 9. Does this work with Sound Devices MX-Hirose?

A: Yes, the PSC NP-1 Battery Cup with 4-Pin Hirose Connector is compatible for use with the Sound Devices MX-HIROSE Hirose DC Input Sled for MixPre, MixPre-M & MixPre-II Mixer-Recorders.

Q: 10. Is this an extension cable? What is the pin configuration on each end? I'm looking for a 4 pin male 90 degree end to straight female end to extend AC power supply from Sound devices so I don't have to open mixer bag to power up. THX

A: Although a pin configuration is not available, we can confirm that the Film Devices Hirose Straight to Hirose 90º Power Cable is used for power distribution scenarios and has a male 4-pin Hirose connection on each end. This cable would not work to extend a power cable also terminating in 4-pin Hirose male.