The tan Countryman E6 Earset Mic for Audio Technica Wireless Transmittersis a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a cH-style 4-pin connector for direct connection to Audio Technica ATW-3201 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Audio Technica Transmitters    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. can this mic be used with headphones for monitoring?

A: There is no headphone port on the mic. You would need to monitor the sound from the device you plug the mic into.

Q: 2. Does this come with a mic holder if I'm not using it with a shock mount?

A: Yes it does!

Q: 3. how does it work with a zoom h6?

A: Plug it in and turn on the phantom power and bring up the level.

Q: 4. Will the AT875R work on a Panasonic Lumix GH4? Does it plug directly in or do I need a pre amp?

A: The Audio-Technica AT875R Short Shotgun Microphone requires phantom power to operate, which is not provided directly from the 3.5mm external microphone input on the Panasonic Lumix GH4 Mirrorless Camera. To use these two components together, a device that provides a phantom-powered XLR input preamp and converts the signal to a 3.5mm microphone output is required. BH #BEDXAMICROP Beachtek DXA-MICRO-PRO Active XLR Compact Adapter is a good solution in this scenario: https://bhpho.to/3tzeD2N

Q: 5. does the Lav Mic come with a windscreen?

A: It does but it's real thin. I'd recommend doubling them up or getting a pack of thicket ones.

Q: 6. Can I use the AT 803 mic with this unit?

A: The Audio-Technica At 803 lavalier microphone will not connect to this wireless system. I would recommend the Audio-Technica AT899CW - Sub-Miniature Omnidirectional Lavalier Microphone, BH #AUAT899CW, which is a high quality miniature condenser clip-on microphone that has the appropriate locking 4-pin connector.

Q: 7. Can this be used with the Beachtek DXA micro pro? Then I can record into my camera with the XLR on the preamp but does the clip that comes with it attach to the preamp? Or do I need some sort of adapter to make it attach to a cold shoe?

A: Yes, the AT875R microphone can be used with the Beachtek DXA-Micro-Pro to record audio into a camera. The DXA-Micro-Pro can be attached on top of the camera in the shoe mount or mounted below in the camera's tripod socket. The clip that is included with the microphone is used to attach the mic to a mic stand. If you want to attach the mic to the camera using a cold shoe mount, you should use a shockmount like the Auray DUSM-1 Universal Shockmount (B&H # AUDUSM1) or Rode SM3-R Camera Shoe Shockmount (B&H # ROSM3R). If you want to mount both the DXA-Micro-Pro and AT875R on top of the camera, that is also possible. The shockmounts mentioned above both have a 3/8" female thread on the bottom of the cold shoe. The male post on top of the DXA-Micro-Pro 1/4"-20. You can use a CAMVATE Cold Shoe Mount with 1/4"-20 Thread (B&H # CAC1347) to create a cold shoe on top of the DXA-Micro-Pro or use an Impact Female 1/4"-20 to Male 3/8"-16 Thread Adapter (B&H # IMCA109) to attach the shockmount by the female thread on the bottom.

Q: 8. does this come with the foam windshield? or do I buy it separately?

A: Mine came with the foam cover. As well as a black Audio Technica zippered bag for the mic.

Q: 9. What type of short cable is needed to connect it to a XLR female port on the camera? XLR male to XLR male?

A: The Audio Technica AT875 has a male XLR output, as do all mics with XLR. To connect to a cameras XLR input of similar XLR input device, you will need an XLR male to XLR female cable.Kopul 3000 series cables are a solid choice. a href= http://bhpho.to/1xdCvjQ target= _blank http://bhpho.to/1xdCvjQ/a

Q: 10. Would this microphone connect to the Zoom H1n? If so, how would it?

A: Technically you can, but it's kind of a long walk. You would need to connect the mic to a Phantom Power Supply, and then to the H1. You may want to consider a self-powered mic (one AA battery) and the correct cable: https://www.bhphotovideo.com/c/product/1171344-REG/senal_mc24_el_professional_shotgun_microphone.html https://www.bhphotovideo.com/c/product/1221867-REG/kopul_xrsm_015b_xrsm_3_pin_xlr_female.html