The light beige Countryman E6i Directional Earset Mic, Low Gain, 1mm Cable, 6-Pin Hiroseis a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6i earset's cable terminates to a 6-pin Hirose connector for direct connection to Samson BT3, CT2, TX4, and UT4 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Samson Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Does this work with Sound Devices MX-Hirose?

A: Yes, the PSC NP-1 Battery Cup with 4-Pin Hirose Connector is compatible for use with the Sound Devices MX-HIROSE Hirose DC Input Sled for MixPre, MixPre-M & MixPre-II Mixer-Recorders.

Q: 2. Will this item work with the Cable Techniques MX-POWERSLED for Sound Devices MixPre?

A: Yes, the Deity Microphones SPD-HRISO 4-Pin Hirose Inline Power Isolator Cable can work with the Cable Techniques MX-POWERSLED for Sound Devices MixPre. It can be placed between any Hirose 4 pin battery or power distribution, and the sled or device to be powered, for ground isolation.

Q: 3. How long is this cable?

A: The Deity Microphones SPD-HRHR 4-Pin Hirose DC Power Cable (BH # DEDTS0287D61) is about 18 inches long.

Q: 4. Will this convert the 20 pin out of the Canon ZSG-C10 Zoom Controller to BlackMagic 12 Pin Lens Control?

A: No, the Chrosziel Canon 20-Pin Hirose to Fujinon 12-Pin Adapter Cable for Servo Zoom Control (B&H# CHCABC20F12Z) is designed to be used with a Canon servo lens only. Among the issues would be a lack of power to the Blackmagic Design controller.

Q: 5. How long is it stretched and unstretched?

A: At this time, that spec is not specified by the manufacturer.

Q: 6. Does It work for 17-!20 mm Cine Servo Canon Lens?

A: For that lens we recommend the IDX System Technology C-ZLPRO D-Tap to Hirose Cable for Canon CINE-SERVO Zoom Lenses (12.5") B&H # IDCZLPRO. It is designed specifically for that lens. https://bhpho.to/2yJuuNC

Q: 7. Sled accomodate a Powerextra NP-F750/F770

A: The PSC NP-1 Battery Cup with 4-Pin Hirose Connector is designed to accommodate "NP-1" style batteries and will not also accommodate the form factor of the Powerextra NP-F750/F770 batteries.

Q: 8. Think this would work with a GH4?

A: This unit is specifically for the Blackmagic Design Pocket Cinema Camera (BMPCC) which has particular needs. Therefore it is our opinion that we would have to answer your question in the negative.

Q: 9. Hi, Is compatible with np98 Hawkwoods batteries? Thanks

A: Yes, the Hawk-Woods NP-98 battery is an NP-1 style battery and it is compatible for use with the PSC NP-1 battery cup.

Q: 10. Will this also work with fujinon HD lenses?

A: I only own Canon HD lenses and it definitely works on those. I can't confirm that it works on a Fujinon lens, but those are usually universal in power, a Fujinon and a Canon lens would work on any camera with standard power so i can't image it not working... i just can't say that i have used one with this adaptor.