Ses-X-Fa4Lxt01 4-Channel Xlr Audio-Over-Fiber Extender

Ses-x-fa4lxt01 4-channel Xlr Audio-over-fiber Extender

Product Code: eq74939
Availability: In Stock

$2,999.85 $4,439.78

Qty

15 reviews Write a review

Description
Reviews (15)

The SES-X-FA4LXT01 4-Channel XLR Audio-over-Fiber Extenderis a cost-effective solution for sending four channels of unidirectional line-level audio over a single-mode optical fiber cable—with the analog signal digitally encoded at 24-bit/48 kHz. It offers a transmission distance up to 12.4 miles with little to no loss of signal quality. The kit can be used for stadiums, live-event stages, broadcast studios, theme parks, distance surveillance systems, or professional AV installs.

The SES-X-FA4LXT01 includes a 4-channel transmitter unit and a 4-channel receiver unit, both housed in rugged aluminum enclosures with balanced XLR connectors. Use an ST fiber optical cable (available separately) to connect the two units via their respective bayonet-style ST fiber connectors—engineered to ensure a consistent, uninterrupted signal. The plug-and-play design ensures fast, adjustment-free installation and operation.

All Sescom optical and electrical interfaces conform to the international standards of compliance including FCC & RoHS certifications.

4-Channel Transmitter & Receiver Units Adjustment-Free Plug & Play Operation 24-Bit Digitally Encoded Analog Audio Transmission Distance up to 12.4 Miles

Transmitter Interfaces
Inputs	4x XLR 3-Pin Female
Outputs	1x ST
Receiver Interfaces
Inputs	1x ST
Outputs	4x XLR 3-Pin Male
Standards
HDCP Support	Yes
EDID Support	Yes
Transmission
Max Transmission Distance	12.4 Miles / 20 km (via Single-Mode Fiber)
Audio Format	AES/EBU: 48 kHz / 24-Bit
Supported Cable Types	Single-Mode Fiber
Power
Transmitter Power I/O	1x Proprietary (2 to 12 VDC at 2 A) Input
Receiver Power I/O	1x Proprietary (2 to 12 VDC at 2 A) Input
PoE Support	Yes
Transmitter Power Consumption	(2 W)
Receiver Power Consumption	(2 W)
General
Transmitter Dimensions	7.12 x 6.5 x 6.25" / 18.08 x 16.51 x 15.88 cm
Receiver Dimensions	7.12 x 6.5 x 6.25" / 18.08 x 16.51 x 15.88 cm
Packaging Info
Package Weight	4.7 lb
Box Dimensions (LxWxH)	18.3 x 12.8 x 3.3"

Enables cascaded audio setups
Eliminates ground-loop noise and suppresses EMI

Unity gain: 0 dB
Frequency response: 20 Hz to 20 kHz
Signal-to-noise ratio: > 90 dB Ref. 4 dBu, A-Weighting
Total harmonic distortion: <0.05%
Maximum balanced input signal: 18 dBu
Max input/output voltage: 17.4 Vp-p
Optical wavelength: 1310nm
Universal power adapter: 100-240 VAC, 50/60 Hz

Related Questions and Answers

Q: 1. Is this still supported by Saramonic? I can't find the manual or the unit on the Saramonic website.

A: Yes, A user manual can be located using the following link https://www.bhphotovideo.com/c/product/1443713-REG/saramonic_smartrig_uc_two_channel_audio_interface_for.html

Q: 2. I don't need stereo for DSLR XLR adaptor cable. Will this still work for basic audio from a Sennhesier mic?Sescom SES-DSLR-ST-MIC XLR Stereo Mic to DSLR Audio Input Adapter Cable (10')

A: The Sescom SES-DSLR-ST_MIC is actually an output cable designed to output audio to PA systems from small cameras and recorders with a 1/8 output. In order to connect a standard dynamic or battery powered mic to a DSLR, you can use a standard XLR cable to run the length, and an adapter such as the Kopul LMT-100 to input into the DSLR. a href= http://bhpho.to/1yMIinD target= _blank http://bhpho.to/1yMIinD/a

Q: 3. will this work with the Sony a7iii?

A: Yes

Q: 4. Will this allow me to use wireless Sennheiser mics with Facebook live streams from my iPad?

A: It worked for me using multiple mics on a Youtube live plugged into headphone jack so I believe it will work gor your setup

Q: 5. What app do I need on my iPhone with this? Does it interface with GarageBand?

A: The Saramonic SmartRig+ can be used with GarageBand or any recording app that is compatible with your iPhone. The SmartRig+ is simply an audio interface that provides a way to connect an instrument or microphone with your iPhone.

Q: 6. how long is each split end?

A: The Manufacturer does not specify the length of the cable at the Y split for the Sescom SES-IPOD-XLRM06 3.5mm Stereo to Dual XLR Male Mono Audio Cable (6').

Q: 7. would this work well splitting a microphone? Or is it only meant for Line level signals.

A: Yes you can split a microphone using the Sescom SES-XLR-ABC.

Q: 8. Will this device help to eliminate hiss if I connect it as a preamp between the shotgun microphone (600 Ohms) powered by the 1.5V battery and the Tascam DR-40 recorder?

A: Not necessarily. It would be helpful to know which shotgun microphone you will be using and how it is connecting to the recorder so we can do a bit of troubleshooting first to determine the source of the noise. Please contact us by phone or through live chat on the website and we can work with you directly to find the best solution.

Q: 9. Output TRRS. How to adjust TRRS output to TRS camera input? Thanks

A: There is a switch on the front. Smartphones and Tablets (looks like a smartphone) and Cameras. Switch to Smartphones and Tablets for TRRS, switch to Cameras for TRS.

Q: 10. Is the bottom mount 1/4-20 ?

A: Yes, the SmartRig+ does provide a 1/4"-20 threaded mounting point on the bottom to attach to a tripod, mic stand, camera, or other device.

Ghostwalker	26/09/2024
[1x ST] This is a high quality pad for attenuating balanced line level signals. Robust, simple, durable and with the advantage of a smooth high quality potentiometer to dial in the amount of gain reduction on-the-fly. Super simple and just works! 5

Sean	11/09/2024
[ (2 W)] Product met expectations and the turnaround from B&H was incredible 5

Peter	02/09/2024
[ (2 W)] Have a new Takamine and no volume control on the guitar--I put this on my mic stand and it's perfect!!! 5

Mark	24/08/2024
[1x ST] A high quality and inexpensive switch that met our needs perfectly! 5

Mark	24/08/2024
[1x ST] A high quality and inexpensive switch that met our needs perfectly! 5

Pedro	24/08/2024
[Yes] We use this to control the audio level coming into our cameras from the P/A system when recording in lecture halls and auditoriums. This is NOT meant to regulate the volume between a microphone and a speaker! (It's not supposed to take the place of a standard audio mixer. It also does NOT pass phantom power used by condenser mikes.) Requires no external power. Gives us a last line of defense when the guy assigned to monitor the house mixing board isn't doing his job. Wouldn't go on a shoot without it. 5

Pedro	24/08/2024
[Yes] We use this to control the audio level coming into our cameras from the P/A system when recording in lecture halls and auditoriums. This is NOT meant to regulate the volume between a microphone and a speaker! (It's not supposed to take the place of a standard audio mixer. It also does NOT pass phantom power used by condenser mikes.) Requires no external power. Gives us a last line of defense when the guy assigned to monitor the house mixing board isn't doing his job. Wouldn't go on a shoot without it. 5

Paul	07/08/2024
[1x ST] This a very handy little audio switchbox that solved a unique need in my studio for switching channels from an audio source. It works perfectly and is well made. It does exactly what i need and I'm up and running. 5

Paul	07/08/2024
[1x ST] This a very handy little audio switchbox that solved a unique need in my studio for switching channels from an audio source. It works perfectly and is well made. It does exactly what i need and I'm up and running. 5