The black Countryman E6 Omnidirectional Earset Mic for Beyerdynamic Wirelessis a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a LEMO 4-pin connector for direct connection to Beyerdynamic TS-170, TS-170p, VHF TS-190, and TSP wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Beyerdynamic Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Does this fit the Wireless Go II microphones?

A: Yes, the Rode Interview GO Handheld Mic Adapter for the Wireless GO (B&H # ROINTERVIEWG) is compatible tor use with Wireless Go and Wireless Go II transmitters.

Q: 2. Does anyone know of a case for this adapter?

A: https://www.bhphotovideo.com/c/product/470286-REG/Rode_ZP2_ZP2_Zip_Pouch.html

Q: 3. Does this work with Sennheiser lavs?

A: Yes, the Rode Lavalier II Omnidirectional Lavalier Microphone (Black) has a "Sennheiser" type 3.5mm wiring configuration and will work with Sennheiser wireless transmitters with 3.5mm input connections.

Q: 4. Could this work with DJI Mic Wireless Microphone Kit?

A: The Rode Interview GO Handheld Mic Adapter for the Wireless GO is designed to accommodate the specific form factor of the Rode Wireless GO transmitters and would not marry to the DJI Mic wireless transmitters in the same manner.

Q: 5. Can this handle be attached to a mini tripod?

A: Yes, you can attach the Rode Interview GO handle to a mini tripod. A clothespin style mic clip like the On-Stage MY200 Clothespin-Style Plastic Mic Clip (B&H # ONMY200) can grip the handle. If the thread on the mini tripod is 1/4"-20, use a thread adapter like the CAMVATE 5/8"-27 Male to 1/4"-20 Female Microphone Screw Adapter (B&H # CAC1150) to accommodate the 5/8" thread on the mic clip.

Q: 6. will it work with Godox Movlink m wireless Microphones?

A: Yes, the Rode interview go handheld mic adapter will accommodate several systems with the same form factor.

Q: 7. does this fit the rode me as well?

A: Yes, the RODE Interview GO Handheld Mic Adapter for the Wireless GO will work with the RODE Wireless ME Compact Digital Wireless Microphone System.

Q: 8. Does anyone have a solution for this windscreen to keep in from falling off?

A: Add thin strips of velcro on the inside.

Q: 9. which airline micro wireless to go with at zip code 25560?

A: It doesn't really matter you can pick whatever frequency block you want. It only matters if you start running multiple systems at the same time.

Q: 10. any replacement winscreen ?

A: No, there is no direct replacement windscreen available at this time for the Rode Interview GO Handheld Mic Adapter. The original foam windscreen is a custom size with a rectangular-shaped interior to fit over the transmitter and edge of the handle. The closest foam windscreen size would be a 1-5/8" round foam windscreen which you would need to customize yourself to make it fit. You might be able to customize something like the WindTech 900 Series Windscreen 1-5/8" Inside Diameter (B&H # WI900B), but you will need to add more foam to the inside to make it fit. Otherwise, for a direct replacement with the Rode logo, contact Rode and they should be able to help with a replacement. You can reach Rode by phone at 562-364-7400. Their US offices are based in California.