The black Countryman E6 Directional Earset Mic, Low Gain, TA4F Connectoris a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a TA4F connector for direct connection to Anchor Audio WB-6000, WB-6400, and WB-8000 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Anchor Audio Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Does it work with Shure microphone with TA4F connector?

A: Yes, there is a Shure TA4F connector included in the kit.

Q: 2. Will this microphone worth with the Sennheiser EW 100 G3 Bodypack transmitter?

A: The Samson SE10T will include multiple adapters which will enable you to connect this mic to most major wireless brand transmitters including the Sennheiser EW G3 series transmitters.

Q: 3. What boom pole do you suggest for this mic?

A: The Williams Sound MIC 027 can be used with a shockmount to attach it to the male thread on any standard boompole, such as Rode's Micro Boompole (B&H# ROMICROBOOMP) or the On-Stage MBP7000 (B&H# ONMBP7000). Auray's DUSM-1 (B&H# AUDUSM1) and Azden's SMH-1 (B&H # AZSMH1) are both universal shockmounts which have a shoe mount for use on a camera as well as a 3/8" female thread on the bottom that attaches to the male thread on a boompole.

Q: 4. How would this perform as a headset mic for football/basketball playcallers? Is the isolation pretty good?

A: This product works well for this application, providing decent off-axis rejection of unwanted ambient sound. Keeping your gain settings a little lower on the bodypack will also help reduce ambient bleed. In particularly loud environments and in sports applications, it may also be helpful to mute or turn off your bodypack between announcements or calls to avoid unwanted speech or noise transmissions between uses.

Q: 5. is this compatable for use with the Shure BLX4 wireless system?

A: This is designed to plug directly into a mixer. The option of the WH20 that would connect to a BLX bodypack needs a TA4F connector. That can be found here: https://www.bhphotovideo.com/c/product/162053-REG/Shure_WH20TQG_WH20TQG_Headworn_Mic.html

Q: 6. A) Will the Rode VideoMic Me work with a Canon EOS M by using a TRS to TRRS cable?B) Will the Rode VideoMic Me work with a Canon EOS M by using the original audio connector?C) Does the Rycote Lyre Shock-Mount of the Rode VideoMicro also work with the Rode Videomic Me?

A: Hi, if you are hoping to use the VideoMic Me mounted on-camera you would be better off using the VideoMicro, which is essentially the same mic capsule and acoustics, but with the shockmount, form factor and standard 3.5mm TRS output designed for use on cameras.

Q: 7. Is the XLR connection a Mini XLR ?

A: The Shure WH20 headset microphone is available with three different types of connectors. B&H# SHWH20QTR has a 1/4" phone connector, B&H# SHWH20XLR has a standard 3-pin male XLR connector, and B&H# SHWH20TQG has a 4-pin female mini XLR connector. The mini XLR version is intended for use with a wireless bodypack transmitter while the XLR and 1/4" connectors are for use with PA system or recorder.

Q: 8. How long will this mic be on backorder?

A: Expected availability: May 23 2016

Q: 9. Will the RDE VideoMic Me iPhone Shotgun Mic work on an Apple iPod Touch?

A: Yes.

Q: 10. XLR connector is male or female?

A: The XLR connection on this headset is Male.