Pristine, versatile, and portable, the MOTU M4 USB-C Audio-MIDI Interface | Compact & High-Qualitydesktop 4x4 USB-C audio-MIDI interface combines high-class audio performance, a robust bundle of DAWs, virtual instruments, loops, and samples, and a feature set that makes it equally powerful and user-friendly for musicians, podcasters, and producers, all at a highly affordable price point.

With its two front-panel mic/line/instrument preamps and two rear-panel line inputs, the M4 can record anything from dynamic and condenser microphones to electric guitars and drum machines in distortion-free, sparkling clarity. Equipped with top-notch ESS digital-to-analog converters that drive the main outs and the headphone jack, the M4 lets you monitor through your speakers and headphones with the dynamic range normally found only on much more expensive interfaces.

Use the M4's digital loopback channels to easily route audio from your computer directly into your host software—record remote podcast guests from Skype or any other VoIP software without incurring horrible feedback, or livestream a mix of live inputs and the computer's output.

The M4 is equally suitable for producers, thanks to its MIDI 5-pin I/O. Plug in a MIDI keyboard to control virtual instruments such as the selection of over 100 VIs included with the M4. Or, run MIDI from the M4 to your favorite hardware synth to capture its glorious tones through the M4's pristine analog preamps.

No matter what you do, the M4's specially engineered drivers ensure ultralow-latency monitoring so you can rehearse and record in real time without hearing any distracting echo, and the full-color LCD screen shows you high-resolution metering for all inputs and outputs at all times. Take the M4 anywhere you need to work; it is bus-powered and compatible with Mac/Windows computers and iOS mobile devices.

Musicians, Podcasters & Producers    Bus Powered / Mac, Windows, iOS    2 Mic/Line/Instrument Preamp, 2 Line In    1 Headphone Out, 4 RCA & 1/4" Line Out    24-Bit / 192 kHz AD/DA Conversion    Virtual Loopback for Streaming    48V, Low-Latency Monitoring    Full-Color LCD with I/O Metering    MIDI I/O on 5-Pin DIN Jacks    DAWs, VIs, Loops & Samples

Equipped with the same ESS Sabre32 Ultra DAC technology found in audio interfaces the pros use, the M4 delivers 120 dB of dynamic range on its main outputs. ESS converters also drive the headphone output. Ultraclean preamp circuits produce a measured -129 dBu EIN on the mic inputs; this means while recording, you'll only hear the mic, not the mic pre.

The M4 has balanced 1/4" outputs for professional-level monitoring, and also features mirrored RCA outputs for feeding receivers and other unbalanced gear. With a 1/4" headphone output, you can also monitor your work privately.

The M4's included driver provides convenient loopback channels to your host computer, so you can easily capture your computer's output. Combine computer audio with live mics while recording in your DAW, allowing you to capture guests over Skype or other VoIP programs. You can also use the loopback function while streaming live to sites like Twitch.

In addition to the monitor outputs, the M4 offers two 1/4" line outputs and two mirrored RCA line outputs. Use these outputs to feed outboard gear such as compressors, equalizers, stereo-width processors, or whatever else you have in your arsenal. Route audio to channels 3-4, through your favorite hardware pieces, and then back into the two 1/4" line inputs. This makes the unit suitable for hybrid mix engineers.

The M4 provides ultralow latency for monitoring live inputs through your computer, thanks to MOTU's expertly engineered USB drivers. These deliver 2.5 ms of round-trip latency, measured with a 32-sample buffer at 96 kHz.

The M4 gives you one-touch hardware monitoring for all inputs, including line inputs 3-4. You'll also note the mix knob for balancing live inputs with computer playback; this lets you secure your perfect monitor mix, so you can hear your playing without latency, as well as any playback tracks, all at the same time.

The M4 includes traditional 5-pin MIDI input and output ports, so you can connect a MIDI controller, a sound module, or even a keyboard workstation without having to get a separate MIDI interface. The four 1/4" outputs on the M4 are DC-coupled, allowing you to send MIDI data from your DAW as CV to hardware analog synthesizers, Eurorack modules, and sequencers.

The unit is bus-powered over USB for optimal portability and convenience. It includes a USB-C to Type-A cable for compatibility with most computers. If your computer has USB-C ports, simply use a USB-C cable (available separately) to connect the two.

Alternatively, by using a USB-C power adapter, the M4 can be used as a standalone preamp and basic mixer, no host computer required. Simply engage the monitor button for each input (and 48V phantom power, if needed), and adjust the preamp gain. Connect the main outs to any line-level destination, such as a PA or patch bay.

The M4 includes Ableton Live Lite and MOTU Performer Lite, popular and capable DAWs geared for music recording and production. Also included are over 100 instruments for Performer Lite, as well as 6GB of loops, sounds, and one-shot samples for either DAW.

• USB-C audio interface with professional-level sound, four inputs, and four outputs
• Easy-to-read metering for all inputs/outputs, with a full-color LCD
• Two XLR-1/4" mic/line/Hi-Z guitar inputs and two balanced 1/4" line inputs
• Individual preamp gain and 48V phantom power for each input
• Four balanced, DC-coupled 1/4" TRS outputs for feeding monitors, outboard gear, or even hardware synthesizers and sequencers
• Four mirrored RCA unbalanced outputs
• One stereo headphone output, driven by ESS converters, with independent volume control
• Supports resolutions up to 24-bit / 192 kHz
• USB audio class compliant for plug-and-play operation on Mac or iOS (driver required for Windows)
• Driver loopback for capturing host output, live streaming, and podcasting
• MIDI I/O on 5-pin DIN jacks
• Rugged metal construction
• Kensington security slot

Related Questions and Answers

Q: 1. Made in USA or made in China?

A: The MOTU M4 is made in China.

Q: 2. Does this come with a USB-A to USB-C cable? Or any cable?

A: A 3 foot USB-C to USB-A cable is included.

Q: 3. Are the 1/4" and TRS monitor outputs on back mic level and could you run a mixed signal to a second computer?

A: Both sets of 1/4"/TRS outputs on the MOTU M4 Desktop 4x4 USB Type-C Audio/MIDI Interface are specified as Line level. Either set of outputs would be suitable for sending a mix to another device.

Q: 4. Can you actually record true 32 Bit Float through this interface?

A: No, the M4 does not offer 32-bit floating point recording.

Q: 5. Is the M4 compatible with Apple's M1 Computers?

A: Not yet compatible with M1 chips.

Q: 6. Are the line outs 3/4 able to be switchable outputs? For example I use Vmix for streaming and need to be able to send something different to my speakers than what is going to my headphones. So I want to make sure I can route output 3/4 as like just playback and main outputs as the master.

A: Line Outputs 3/4 will output the same audio that is coming from your main monitor outputs 1/2. The reason for outputs 3/4 is primarily for routing to outboard gear like reverb or effects processors and then bring that audio back into your line inputs, to mix with your existing audio. You can also monitor through another pair of monitors using line outs 3/4.

Q: 7. is it possible to listen to a microphone plugged into the left channel through both left and right sides of my headphones, or send one mic into both channels?

A: It is possible to monitor channel one through both sides of your headphones with this interface. The Input Monitor Mix button will send a mono input to both channel outputs. As well, if monitoring from a DAW, a mono channel in the DAW will playback in both ears.

Q: 8. Is there a mobile app for controlling the monitoring mix like on FocusRite interfaces? Or is that available only on the higher end interfaces?

A: No, a mobile control app is not available for use with the M4. MOTU does offer mobile apps for several of their larger, higher-end interface models.

Q: 9. Is it possible to bypass mic preamps on m2 or m4 models? I want to use external preamp

A: You can come from your mic pre amp into the MOTU M2 or M4 at line level via the 1/4-inch TRS input in the center of the combo input connection. This would bypass the mic pre amp on the audio interface.

Q: 10. How would this work a AKG C414 XLII?

A: With 48V enabled, the MOTU M4 Desktop 4x4 USB Type-C Audio/MIDI Interface will accept a connection into its main XLR combo jack inputs from the AKG C414 XLII Large-Diaphragm Multipattern Condenser Microphone via standard 3-Pin XLR cable.