The white Countryman B6 Omni Lavalier Mic for Micron Wireless Transmittersfrom Countryman B6 Omni Lavalier Mic for Micron Wireless Transmittersis a very small lav microphone measuring one tenth of an inch in diameter. It can be used to capture audio for theater, broadcast, house of worship, and general lavalier applications.

This version is the least sensitive mic and a good choice for instrument applications, opera, or where the microphone will be positioned very near the mouth. Built with a low handling noise and rugged construction, the B6 lavalier microphone can be easily hidden in a performer's hair or on costumes, ties, or behind a shirt button. It can also be attached to eyeglasses, for a secure, discreet, and convenient alternative to hair miking. The ultrathin diaphragm deliver a natural sound while its tiny size makes the B6 easy to position for ambient noise and feedback rejection. The B6's aramid-reinforced cable terminates to a LEMO 6-pin connector for direct connection to Micron TX 700-Series wireless bodypack transmitters.

Additionally, the included swappable protective caps let you shape the frequency response for different situations or to match other microphones. The B6 is resistant to makeup, sweat, and moisture when used with a protective cap, which can be quickly removed for cleaning or replacement.

For Theater, Live Stage & Studio Use    Detachable Connector    Fits Micron Transmitters    LEMO 6-Pin (M7), See Description    20 Hz to 20 kHz Frequency Response    Includes 3 Capsule Protection Grids    Headroom for Instruments & Strong Vocals    Includes Windscreen & Cable Clips    Includes Carrying Case

Looks great when you want to see it, virtually disappears when you don't. The B6 is easily hidden in hair or on costumes, with five colors to match clothing, hair, and skin tones. Use a felt tip marker to color the white caps for near-perfect concealability. Never suffer the hassle and degraded sound quality of under-clothing miking again.

The B6 is resistant to makeup, sweat, and moisture when used with the supplied protective caps and works well in hair or on the body. The protective caps are easily removed for cleaning or replacement, and the aramid-reinforced cable gives it world-class survivability.

The B6 provides high-quality audio with low distortion at SPL up to 140 dB on 48V phantom power. The aramid cable and thin diaphragm combine to offer low handling noise. The flat-frequency response accurately captures voice or instruments, and the small size makes the B6 easy to position for ambient noise and feedback rejection.

Changeable protective caps let you shape the frequency response for different situations or to match other microphones. Versions are available for different speaking or singing styles, with high overload capability for recording instruments.

Very low, mic near user's mouth.

Related Questions and Answers

Q: 1. What microphone is the equivalent for this set? I have two mics from this kit that I need to replace.

A: The Saramonic SR-UM10-M1 Omnidirectional Lavalier Microphone with Locking 3.5mm Plug (B&H # SASRUM10M1) is a replacement for the original microphone that is included with the Saramonic UwMic9 2-Person Camera-Mount Wireless Omni Lavalier Microphone System. You can also use the Rode RODELink Lav Omnidirectional Lavalier Microphone for RODELink Systems (B&H # ROLINKLAV), the Senal OLM-2 Lavalier Microphone with 3.5mm Locking Connector for Sennheiser EW & Senal AWS-2000 Series (B&H # SEOLM2), or the Sennheiser ME 2-II Omnidirectional Lavalier Microphone with Locking 3.5mm Connector (B&H # SEME2II). Any of the lavalier microphones with a locking 3.5mm TRS male connector that are wired for compatibility with Sennheiser transmitters can also be used with the Saramonic TX9 Digital UHF Wireless Bodypack Transmitter.

Q: 2. So if I plug this receiver into a zoom f8 will it come up as a stereo track with the left and right mixed or independent? And if i activated the stereo link function on my zoom f8 would one mic then be on channel 1 and one on channel 2 (for example) on my zoom f8?

A: There are two options on the receiver. Either set the output signal to stereo or mono. If you have two mics coming it it will put them out as separated LR. If youre only using one transmitter than you might want it set to mono mix, but dont mess that up!

Q: 3. I have the Sony FD AX100 camcorder and am looking to run 2 wireless lapel microphones. I have just one input jack. Will this system allow me to do this?

A: Works great!

Q: 4. Looking to film my kid playing sports mic'd up. I am a photographer and I noticed my son talking a lot and I thought it would be fun/funny to get the audio as he never admits to actually talking. I would like to use my Samsung S7 (Phone) as my camera has I have a gimbal for it, but I do have a few other cameras like the Canon 5D4, 6d, 7DII, and 60D.....what is best recommended to get the results I think I'm looking for?

A: This would work for you if you have a place on the gimbal to mount the receiver. You will also need a cable to interface with your phone. The Saramonic SR-PMC1 for TRRS headphone port will work great with that phone.

Q: 5. Dose the Sanken Cos-11D lav work with the Saraminic UWMIC9 TX9 transmitter ?

A: Yes, you can use a Sanken COS-11D lavalier with the Saramonic UWMIC9 TX9 transmitter, but only if it has a 3.5mm locking connector and a compatible internal wiring configuration. B&H item # SAC11WNSOTRB is a COS-11D with a 3.5mm locking connector that is wired for use with Sony UWP transmitters, and it will also work with a Saramonic UWMIC9 TX9 because the internal wiring configuration and the connector are the same for both Saramonic and Sony.

Q: 6. anyone had any radio interference static, hisses or clicks picked up from the transmission especially when walking about in differenet environments of is the audio always generally 'clean' and free of intereference? Thank you

A: Have you changed the channels? Do a frequency scan when this happens and it will find the cleanest available channel. Then sync the transmitters to the receiver. You will need to do this for both A & B frequencies on your receiver. This should fix your problem.

Q: 7. Is the receiver compatible with the Sony UWP-D21 transmitter?

A: No, Saramonic UwMic9 wireless components are not compatible for use with Sony UWP wireless components. The Saramonic RX9 receiver can only be used with other Saramonc UwMic9 transmitters such as the TX9 bodypack transmitter that is included with the receiver, the UH9 handheld transmitter (B&H # SAHU9), and the TX-XLR9 plug-on transmitter (B&H # SATXXLR9). Likewise, Sony UWP wireless components can only be used with other compatible Sony wireless components.

Q: 8. Hi, there. I wanted to use this mic kit as comms are they stereo out?

A: The output would a dual mono.

Q: 9. Can I run a total of 4 transmitters with 2 receivers into a camcorder that has 2 mic inputs, since the receivers are designed to work with 2 transmitters each?

A: Yes, you can use two Saramonic UwMic9 dual-mic wireless systems at the same time with your camcorder by connecting the output of each dual-channel receiver to a separate mic input on the camera. This will allow you to use four transmitters simultaneously.

Q: 10. can you include free waterproof case with two lav mics?

A: The case is not included, but for an additional price I would recommend the SKB iSeries Waterproof Case for Sony UWP-D Two-Channel Wireless Bodypack Mic System (Holds: URX-P03D & Two UTX-B03), BH #SK3I09074BH3.