You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Countryman B6 Omni Lavalier Mic For Amplivox Wireless Transmitters

Countryman B6 Omni Lavalier Mic For Amplivox Wireless Transmitters
  • Product Code: eq75136
  • Availability: In Stock

$995.85 $1,463.90

The light beige Countryman B6 Omni Lavalier Mic for Amplivox Wireless Transmittersfrom Countryman B6 Omni Lavalier Mic for Amplivox Wireless Transmittersis a very small lav microphone measuring one tenth of an inch in diameter. It can be used to capture audio for theater, broadcast, house of worship, and general lavalier applications.

This version is ideal for use as a head mic in theater. Built with a low handling noise and rugged construction, the B6 lavalier microphone can be easily hidden in a performer's hair or on costumes, ties, or behind a shirt button. It can also be attached to eyeglasses, for a secure, discreet, and convenient alternative to hair miking. The ultrathin diaphragm deliver a natural sound while its tiny size makes the B6 easy to position for ambient noise and feedback rejection. The B6's aramid-reinforced cable terminates to a 3.5mm connector for direct connection to Amplivox S-1600T and S-1690T wireless bodypack transmitters.

Additionally, the included swappable protective caps let you shape the frequency response for different situations or to match other microphones. The B6 is resistant to makeup, sweat, and moisture when used with a protective cap, which can be quickly removed for cleaning or replacement.

For Theater, Live Stage & Studio Use    Hardwired Connector    Fits Amplivox Transmitters    3.5mm (AM), See Description    20 Hz to 20 kHz Frequency Response    Includes 3 Capsule Protection Grids    Headroom for Theater Head Miking    Includes Windscreen & Cable Clips    Includes Carrying Case

Key Specs
Compatible TransmittersAmplivox: S-1600T, S-1690T
Polar PatternOmnidirectional
Frequency Response20 Hz to 20 kHz
Maximum SPL130 dB (A-Weighted)
Sensitivity5 for Low/Head Placement for Theater (B6, B3, B2D)
Analog Output1x 1/8" / 3.5 mm TRS Male
Environmental ResistanceWater-Resistant (Unrated)
Microphone
Compatible TransmittersAmplivox: S-1600T, S-1690T
Polar PatternOmnidirectional
Included Tone/Pattern Caps+4 dB Bright, +0 dB Flat, +8 dB Very Bright
Performance
Frequency Response20 Hz to 20 kHz
Maximum SPL130 dB (A-Weighted)
Sensitivity7.0 mV/Pa
Sensitivity5 for Low/Head Placement for Theater (B6, B3, B2D)
Equivalent Noise Level29 dB (A-Weighted)
Connectivity
Analog Output1x 1/8" / 3.5 mm TRS Male
Cable Length5' / 1.52 m
Power
Power SourcesPlug-In Power
Operating Voltage1 to 2 V
Physical
ColorLight Beige
Environmental ResistanceWater-Resistant (Unrated)
Weight0.07 oz / 2 g

Looks great when you want to see it, virtually disappears when you don't. The B6 is easily hidden in hair or on costumes, with five colors to match clothing, hair, and skin tones. Use a felt tip marker to color the white caps for near-perfect concealability. Never suffer the hassle and degraded sound quality of under-clothing miking again.

The B6 is resistant to makeup, sweat, and moisture when used with the supplied protective caps and works well in hair or on the body. The protective caps are easily removed for cleaning or replacement, and the aramid-reinforced cable gives it world-class survivability.

The B6 provides high-quality audio with low distortion at SPL up to 140 dB on 48V phantom power. The aramid cable and thin diaphragm combine to offer low handling noise. The flat-frequency response accurately captures voice or instruments, and the small size makes the B6 easy to position for ambient noise and feedback rejection.

Changeable protective caps let you shape the frequency response for different situations or to match other microphones. Versions are available for different speaking or singing styles, with high overload capability for recording instruments.

Low, head miking for theater.

Related Questions and Answers

Q: 1. Can anyone confirm if this system combines the two lav signals into a mono signal, or if you can output each lav to a discrete L or R channel?

A: When using one lav, if you set the receiver to mono, it will send the signal to both left and right channels. When using two lavs and set the receiver to stereo, it will send each mic to a discrete left and right channel.

Q: 2. Hi, there. I wanted to use this mic kit as comms are they stereo out?

A: The output would a dual mono.

Q: 3. Can you use other, better lav mics with this system? If so any recommendations?

A: Yes, you can use different lavalier microphones with the Saramonic UwMic9 wireless transmitter. The transmitter uses a 3.5mm locking connector and can be used with any of the lavalier microphones that are compatible with Sennheiser wireless transmitters since the wiring for Saramonic is the same. Please note that Sony wireless microphones use the same locking connector, but the wiring is different so Sony mics are not compatible. A few examples of compatible mics are the Sennheiser ME 2-II Omnidirectional Lavalier Microphone (B&H# SEME2II), Countryman B3 Omni Lavalier Mic, Standard Sens, with 3.5mm Locking Connector for Sennheiser Wireless Transmitters (B&H# COB3W4BSR), Tram TR50 - Omnidirectional Lavalier Condenser Microphone (B&H# TRTR50BSETP), Countryman EMW Omnidirectional Lavalier Microphone with Flat Frequency Response for Sennheiser Transmitters (B&H# COMEMWFBSR), and Point Source Audio Series8 CO-8WL Omnidirectional Waterproof Lavalier Microphone (B&H# POCO8WLXSEBE). Please feel free to contact us by phone or through live chat if you would like personal assistance in selecting a microphone best suited for your specific application.

Q: 4. Can the Saramonic UwMic9 work with the Sony Fx6?

A: Yes, you definitely can use the Saramonic UwMic9 Wireless Lavalier Microphone System with the Sony FX6 camera.

Q: 5. Can I run a total of 4 transmitters with 2 receivers into a camcorder that has 2 mic inputs, since the receivers are designed to work with 2 transmitters each?

A: Yes, you can use two Saramonic UwMic9 dual-mic wireless systems at the same time with your camcorder by connecting the output of each dual-channel receiver to a separate mic input on the camera. This will allow you to use four transmitters simultaneously.

Q: 6. Does the receiver keep both lav mics on separate channels (so that one can easily pull and edit one mic audio on its own channel) or does it mix them up together?

A: The output mode of this wireless system can be selected to mono or stereo. When the output mode is mono, the audio from left and right channel will be mixed. When it is stereo, the left and right audio channel output will be separated. The system default is mono.

Q: 7. Curious if people are actually using the included lav mics? My initials tests were quite disappointing compared with a better mic, but maybe others have better experience? It seems they need a lot of gain to get any audible signal at all.

A: You can upgrade the mics to higher quality mics if you choose. Look for locking 1/8" mics that are wired for Sennheiser. That said to upgrade to a mic that is a significant upgrade you are looking at mics that are over $200-350 each, two of those is the same price or more than this entire system.

Q: 8. can you include free waterproof case with two lav mics?

A: The case is not included, but for an additional price I would recommend the SKB iSeries Waterproof Case for Sony UWP-D Two-Channel Wireless Bodypack Mic System (Holds: URX-P03D & Two UTX-B03), BH #SK3I09074BH3.

Q: 9. Dose the Sanken Cos-11D lav work with the Saraminic UWMIC9 TX9 transmitter ?

A: Yes, you can use a Sanken COS-11D lavalier with the Saramonic UWMIC9 TX9 transmitter, but only if it has a 3.5mm locking connector and a compatible internal wiring configuration. B&H item # SAC11WNSOTRB is a COS-11D with a 3.5mm locking connector that is wired for use with Sony UWP transmitters, and it will also work with a Saramonic UWMIC9 TX9 because the internal wiring configuration and the connector are the same for both Saramonic and Sony.

Q: 10. Can I connect transmitters with Sennheiser ME 2-II or they have a different thread?

A: No, the Sennheiser ME 2-II will not work with a Saramonic transmitter. Although Saramonic does use the same type of connector as Sennheiser (3.5mm locking), the internal wiring is different and is not compatible. However, the 3.5mm locking connectors used for Sony transmitters are wired with the same internal configuration as Saramonic, so you can use a Sony (or Sony-compatible) mic with a Saramonic transmitter.different. However, the 3.5mm locking connectors used for Sony transmitters are wired the same as Saramonic, so a Sony or Sony-compatible mic will work with a Saramonic transmitter.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Products You May Like

Amd Ryzen 7 9700x 3.8 Ghz Am5 Processor

$974.22 $1,558.75

Ceiling Retracting Projector Screen

$13,416.00 $18,648.24

Kramer 614r/t Dvi Optical Transmitter & Receiver

$2,568.00 $3,107.28

Sea & Sea Ys-d3 Duo Underwater Strobe For Diving

$2,249.85 $3,599.76

Fujinon Ha42x13.5berd-u48 Hd Lens Zoom Focus Servo

$291,000.00 $355,020.00

Midi Solutions Breath Controller Utility

$627.00 $871.53

Roland Rubix22 Usb Audio Interface 2x2

$524.97 $635.21

Sigma 65mm F/2 Dg Dn Lens For Leica L

$2,097.00 $3,061.62

J5create Jvcu100 Hd Webcam For Google Seo

$149.97 $196.46

Samsung Qn90d 65" 4k Hdr Smart Neo Qled Tv

$4,493.97 $6,696.02