The black Countryman E6i Omnidirectional Earset Mic for Azden Wirelessis a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a 3.5mm locking connector for direct connection to Azden older 10BT and 41BT wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Azden Transmitters    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this work with the Apple iPhone 15?

A: Yes, the Azden i-Coustics HX-Mi TRRS Mic & Headphone Cable for Smartphones & Tablets will work will the Apple iPhone 15; however, you will require the Apple Lighting to 3.5mm Headphone Adapter.

Q: 2. Is any delay while live streaming video

A: Absolutely not, there is no delay when streaming. This is an excellent product and one that I would recommend to anyone.

Q: 3. Which mic is best for wildlife (in front of the camera). Is it the SMX-15 or a stereo version (smx-30). I both want the sound from the around the camera

A: I would probably look at the SMX-30. You can switch between mono and stereo so you can get that atmosphere sound as well as your subject. Or just focus on your subject. If it were me Id record a bit of both and overlay the two so you can adjust the background to be less pronounced than your focus.

Q: 4. We purchased this microphone and now need batteries. Must we use the Azden rechargeable batteries or will any NIMH rechargeable battery work?

A: Only the Azden batteries (1HR-3U) will charge while inside the IRH-15C. Using another brand of rechargeable batteries will work but will have to be charged outside of the unit. Alternatively, any brand of one-time-use alkaline batteries may be used.

Q: 5. Can I plug the receiver into a Zoom recorder? Or do I need to plug it into a camera.

A: Yes. You can connect the output from the receiver into the input of a Zoom recorder. Audio can be recorded separately on the Zoom recorder (instead of in the camera) and then sync it with the video in post production.

Q: 6. Will the headphone and mic still work when connected to an iPhone with lightning adapter?

A: Yes!

Q: 7. can you run 2 mics off of this single receiver?

A: The Azden WR-PRO is only able to communicate with a single transmitter simultaneously. If you are interested in running 2 mics simultaneously, Azden offers the WR32-Pro dual receiver. Available as a set with 2 mics, 2 transmitters, and receiver. a href= http://bhpho.to/1zlor93 target= _blank http://bhpho.to/1zlor93/a

Q: 8. Is Azden SMX-15 Powered Shotgun Video Microphone compatible with the Canon EOS R5c??

A: Yes, the Azden SMX-15 Powered Shotgun Video Microphone is compatible for use with and connection to the 1/8" / 3.5 mm TRS Stereo Mic/Line input on the Canon EOS R5 C Mirrorless Cinema Camera.

Q: 9. This says it's IOS compatible. What IOS system must be running? Will it work with a iPhone6 plus? Also, if I am shooting video with my mobile device, can I use the mic set up for the audio on the video while shooting the video at the same time I have the audio rig set up to that same device ? I'm trying to shoot video with my device but get better quality audio then my iPhone has to offer.

A: I wasn't able to find where it said iOS compatible on this page, but maybe I'm missing it. If it does say that, it's not exactly correct. But if the question is, Can you connect it to a smartphone to record audio while shooting video, the answer is yes. You will need to get our HX-Mi adapter cable or some equivalent so you can plug into the phone's headphone jack and connect to the microphone input. This will work with just about any android or iOS mobile device (including iPhone 6 Plus) as long as it has a TRRS headphone input (which most phones do). Bear in mind this product is just a wireless receiver. We sell this in complete kits as well. You'll want to check out the WLX-PRO+i and WMS-PRO+i which are full systems that come with the required adapter cable for mobile devices.

Q: 10. I have a Canon Vixia camcorder. How do I mount the receiver to it?

A: It should slide right onto the top of the camera. There is a spot where a Flash would be mounted. The receiver can be mounted there as well.