The black Countryman E6 Omnidirectional Earset Mic for WisyCom Transmittersis a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a LEMO 3-pin connector for direct connection to WisyCom MTP30, MTP40, MTP40S, MTP41, and MTP41S wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits WisyCom Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Is this compatible with 5d mark IV?

A: Not only did I check: I own it and use it with my 5D Mark IV without any problem at all!

Q: 2. Will this work with the Zoom H1n?

A: Yes

Q: 3. Are the cables on this lav improved from the original filmmaker kit. I have had to replace 3 lavs under warranty in the past 5 years as a result of cable shorts? They are very thin and not "durable", despite being described as such.

A: The RodeLink Lav Omnidirectional Microphone does have durable Kevlar-reinforced cable, but unfortunately all lavalier mic's for wireless systems are subject to shorts, due to the being pulled or the connector end rubbing against a person's hip at the transmitter end. You may consider a replacement mic, such as the Countryman B3 Omni Lavalier Mic, Standard Sens, with 3.5mm Locking Connector for Sennheiser Wireless Transmitters (Black), BH #COB3W4BSR, which has a more rugged design, and features a water-resistant mic.

Q: 4. How long, on average, do these batteries last in the BMPCC 4K?

A: Approximately 60 minutes.

Q: 5. does it work with the rode wireless go?

A: Yes, this microphone works with the Wireless Go system.

Q: 6. What size/spec is the DC plug on this adapter?

A: The size/spec is not listed. According to Landparte, it is a standard interface. Once in hand it should be easy to determine what size it is. It would be one of the sizes listed on this page. a href= http://wikipedia.org/wiki/Coaxial_power_connector. target= _blank wikipedia.org/wiki/Coaxial_power_connector./a Unfortunately is it not possible for us to pull stock from the warehouse to determine what the size is.

Q: 7. Is there a power adapter cable that will allow me to power from a battery pack?

A: The DC Coupler DR-E6 is strictly for use with the Canon AC-E6N AC Adapter. Using the Tether Tools Relay Camera Coupler for Canon Cameras with LP-E6 Battery, BH # TECRCE6 with the Tether Tools Case Relay Camera Power System, BH # TECRUPS110 will allow you to power your Canon camera from a Jupio PowerVault III 2-Port USB & Wireless 10,000mAh Powerbank, BH # JUJPV0310. https://bhpho.to/3svG9xJ https://bhpho.to/3Jh4P2I https://bhpho.to/3emlGmw

Q: 8. Does this work with Rode Wireless Pro?

A: Yes, the RODE RODELink Lav Omnidirectional Lavalier Microphone for RODELink Systems, is fully compatible with the RODE Wireless PRO 2-Person Clip-On Wireless Microphone System/Recorder with Lavaliers (2.4 GHz).

Q: 9. Will this work with the EOS R5?

A: Yes, the Canon DC Coupler DR-E6 would be compatible for use with the Canon EOS R5 Mirrorless Digital Camera.

Q: 10. Does this microphone need plug in power?

A: Yes it does: Locking 3.5mm TRS output provides compatibility with Rode RODELink TX-BELT beltpack transmitters, RODELink TX-XLR transmitters, and many wireless transmitters from Sennheiser and Senal