The black Countryman E6 Omnidirectional Earset Mic, Low Gain, TA4F Connectoris a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a TA4F connector for direct connection to Anchor Audio WB-6000, WB-6400, and WB-8000 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Anchor Audio Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Is the XLR connection a Mini XLR ?

A: The Shure WH20 headset microphone is available with three different types of connectors. B&H# SHWH20QTR has a 1/4" phone connector, B&H# SHWH20XLR has a standard 3-pin male XLR connector, and B&H# SHWH20TQG has a 4-pin female mini XLR connector. The mini XLR version is intended for use with a wireless bodypack transmitter while the XLR and 1/4" connectors are for use with PA system or recorder.

Q: 2. Is the pinout compatible for Sennheiser or Sony?

A: The Tentacle Sync Omnidirectional Lavalier Microphone with Locking 3.5mm Connector is compatible for use with Sennheiser wireless transmitters.

Q: 3. Does this work with Rode Wireless Go II or the DJI mic?

A: Yes, the Sennheiser ME 2 Omnidirectional Lavalier Microphone with Locking 3.5mm Connector (Black) is fully compatible with the RODE Wireless GO II 2-Person Compact Digital Wireless Microphone System/Recorder (2.4 GHz, Black) and the DJI Mic 2 2-Person Compact Digital Wireless Microphone System/Recorder for Camera & Smartphone (2.4 GHz) wireless systems.

Q: 4. How would this perform as a headset mic for football/basketball playcallers? Is the isolation pretty good?

A: This product works well for this application, providing decent off-axis rejection of unwanted ambient sound. Keeping your gain settings a little lower on the bodypack will also help reduce ambient bleed. In particularly loud environments and in sports applications, it may also be helpful to mute or turn off your bodypack between announcements or calls to avoid unwanted speech or noise transmissions between uses.

Q: 5. Is this Sennheiser ME 2 Omnidirectional Lavalier Microphone with Locking 3.5mm Connector compatible with a Zoom F2?

A: Yes, the Sennheiser ME 2 Omnidirectional Lavalier Microphone with Locking 3.5mm Connector is compatible for use with the Zoom F2 Portable Field Recorder.

Q: 6. For a city council meeting, where the members are facing an audience, I would assume a cardio pick-up pattern is better, as then it wouldn't pick-up as much sound from the audience?

A: That is correct. The omnidirectional version is good for round-table discussions.

Q: 7. Is there any update on if this supports PD and would support all recording options for the R5C?

A: The Bescor LP-E6 Dummy Battery with USB Type-C Connector Kit, Battery & Charger (B&H# BELPE6USBCPR) is a simple dummy battery supporting no more than 8VDC and will not utilize USB Power Delivery sources to fully power all functions of a Canon EOS R5 C Mirrorless Cinema Camera (B&H # CAER5C).

Q: 8. Will the Shure WH20 Headset Mic with XLR Connector for Balanced Mic Output B&H # SHWH20XLR MFR # WH20XLR work with a Fender Passport 150 Pro?

A: It will work. You can plug it directly to one of the mic inputs. I would recommend buying a longer cable or even a wireless system to use it with so you have the freedom to walk around and move with it.

Q: 9. What is the Max SPL for this microphone?

A: Unfortunately Tentacle Sync does not provide the max SPL spec for their MIC01 model.

Q: 10. Can you remove the windshield protector?

A: The windscreen on the most current version of the Sennheiser ME 2 Omnidirectional Lavalier Microphone with Locking 3.5mm Connector is fixed and not removable.