Designed for use in fire drills, rescue training, and other scenarios with challenging ventilation, the Antari FLP-20 Fog Fluid for Fire Training (5.3 Gallons)is a 5.3-gallon container of water-based fluid that produces a high-density fog when used in Antari Fire Training machines. The fluid, which is all-natural and nontoxic, uses ingredients sourced from palm trees.

For Fire Training Machines    Water-Based Fog Liquid    Ingredients Refined from Palm Trees    100% Natural    Nontoxic and Safe    Produces High-Density Fog    Ideal in Places with Poor Ventilation

Antari FLP fog fluid is specifically made for Fire Training machines.

The ingredients of this water-based fog liquid are refined from palm trees.

It is 100% natural, completely nontoxic, and safe.

It can produce high-density fog and is ideal for using in poor ventilation environments such as fire drills and rescue training.

Related Questions and Answers

Q: 1. Will the Magnus VPH-20 Video Pan & Tilt Fluid Head fit a Zomei Q555 tripod? Also does this head come with a quick release plate or would I need to order one separate? Thank you.

A: This head will fit on any tripod, either 3/8 or 1/4 screw. This depends on whether you can get the tripod head off. We do not carry that tripod but the opinion is you can remove the ballhead and then you can put the Magnus in place.

Q: 2. Will this hazer cover a 100' x 120' sanctuary ?

A: Yes the HZ-500 would be suitable for your application.

Q: 3. will this fit a Manfrotto 200PL Quick Release Plate with 1/4 -20 Screw and 3/8 Bushing Adapter quick release plate?

A: I don't think so. The shape of the QR plate included with this head doesn't look the same as photo of Manfrotto plate I'm looking at.

Q: 4. What about a primer to use ?

A: ProCyc recommends the Pro Cyc Gray Bonding Primer (2 Gallons), BH # PRGBP2. https://bhpho.to/3jDPLSf

Q: 5. Can I use the FLR fluid or do I have to use the FLG fog fluid?

A: The instruction manual for the Antari Fog Machine Z-350 Fazer states on page 9 to Only use Antari FLG water-based liquid for the Z-350 Fazer. The machine is tested and calibrated with this liquid to get the best output performance. Warranty will be voided if any other type of liquid is used, improper use of liquid may lead to machine failure and malfunction.

Q: 6. Does this machine require dry ice or just distilled water?

A: The Antari Low Lying Fog machine runs on non-flammable water-based chemistry for strobe and lighting safety. Please review the following item Antari FLG-4 Long-Lasting Fog Fluid for Antari Fog Machines (1 Gallon, Green Formula) BH #ANFLG4 • MFR #FLG-4 https://bhpho.to/3wNfHQW

Q: 7. Per the one review about it not being compatible, can you address this? What type does it work with?

A: The Zacuto 1/4"-20 Fluid Rosette Joint is designed to be used with Zacuto products, or more specifically, Zacuto products that have a Zacuto rosette.

Q: 8. Just received mine, and it makes a very noticeable ticking sound when making haze. The ticking gets faster as the output knob is increased. Is this sound normal?

A: Yes, that's normal. Ticking sound produced from internal pump, ticking sound gets faster as the haze output knob is increased.

Q: 9. What is the operating temperature of the BV-20?

A: The operating temperature range of this Leofoto BV-20 Fluid Tripod Head is -20°C to 40°C.

Q: 10. Can this paint be applied to concrete?

A: Yes you can use the Pro Cyc paint on clean dry concrete. You will first need to prime it. ProCyc recommends the Pro Cyc Gray Bonding Primer (2 Gallons), BH # PRGBP2. https://bhpho.to/3jDPLSf