This PortaBrace Carry Case for DJI Ronin-SC & Camerafrom PortaBrace Carry Case for DJI Ronin-SC & Camerafits the Ronin-SC gimbal, a DSLR or similar-sized camera, and accessories. Accessories can be fit in the main space and the zippered pockets on the outside. A dual-zipper design allows you to open the case wide from the top and have easy access to your gear.

The case is made of 1000D Cordura nylon with triple-bonded nylon threads that better withstand harsh field conditions. The interior is padded with dual-rigidity foam to protect your equipment and lined with soft loop fabric material. The bottom exterior has a non-skid, waterproof layer of material for safely setting the case down on the ground. This layer can be wiped clean with water if dirtied.

The case has soft handles and comes with a removable suede mesh shoulder strap. A 4" padded lens cup is also included for keeping a lens secure inside the case. And two soft nylon and foam blocks are included that can be placed under or around your gear to protect them in transport. These blocks secure to the inside of the case by hook-and-loop touch fasteners.

Fit Gimbal, DSLR Camera, and Accessories    Easy-Access Dual-Zipper Design    Zippered Exterior Pockets    Dual-Rigidity Foam Padding

• Fits the Ronin-SC, a DSLR or similar-sized camera, and accessories
• Zippered pockets on the outside
• Dual-zipper, easy-access design
• Made of 1000D Cordura nylon with triple-bonded nylon threads
• Dual-rigidity foam padding
• Non-skid, waterproof, washable bottom exterior

Related Questions and Answers

Q: 1. I have a Sunway Arca-compatible L-bracket attached to a Sony a7riii. Will this work with this gimbal without removing the L-bracket?

A: Yes, as long as your setup's total weight is less than 4.4 pounds.

Q: 2. Does it work with a Olympus OM-D EM10 Mark IV?

A: Yes, it will hold the weight of the Olympus OM-D EM10 Mark IV. For camera control integration, please refer to DJI's Ronin Series Compatibility Search: https://www.dji.com/support/compatibility

Q: 3. Anyone using this with a Sony a6400? How does it do?

A: The A6400 is exactly the kind of camera the Ronin-SC is designed to work with. This gimbal has a 4.4 pound load capacity and is geared towards smaller mirrorless cameras.

Q: 4. works for the BMPCC4K?

A: Unfortunately it does not. The Ronin-SC is designed for smaller mirrorless cameras only. For the Pocket Cinema Camera 4K you would need the Ronin-S with an offset plate. Ronin-S - https://bhpho.to/2FJgGoG Offset Plate - https://bhpho.to/31mQrjL

Q: 5. Curious if the Canon XC10 or XC15 (w/o audio module) will work with this gimbal and still be fully functional?... i.e. under-slung mode without camera hitting the rear motor, etc.

A: The Ronin-SC is designed for smaller mirrorless options only. It will not be able to balance the Canon XC10 or XC15.

Q: 6. will this work with the panasonic S1 & 24-105mm?

A: The combination of S1 and 24-105mm lens weights 3.75 pounds, which is right on the edge of the Ronin-SC's load capacity. It is possible you will be able to balance this combo on the gimbal, however we would tend to recommend the Ronin-S instead for a larger full frame mirrorless camera with a longer lens. It will be much easier to set up and balance on the Ronin-S. https://bhpho.to/2WcPtmF

Q: 7. Will a Nikon D 5500 work with this rig?

A: DSLR cameras in general are not recommended or listed as compatible with Ronin-SC. You would need to look at models like the Ronin-S for a DSLR like the D5500. https://bhpho.to/2WcPtmF

Q: 8. Is the ronin sc compatible with canon 5d

A: While it might be possible to balance it with pancake lenses, it is not at all recommended for the 5D.

Q: 9. Will this work with a Canon M6 Mkii and Sigma 18-35/Sirui 35 Anamorphic?

A: the gimbals Load Capacity is 4.85 lb / 2.2 kg as long as the payload is within those limit it should work

Q: 10. Can the ronin SC be used with the Sony Nx80 camcorder?

A: no this can not be used with the NX-80, the NX-80 can not be balanced on a motorized gimbal