The black Countryman E6 Omnidirectional Earset Mic for Recordersis a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a 3.5mm locking connector for direct connection to Olympus, Roland, Sony, Tascam, Yamaha, or Zoom DM-420, DM-520, DM-620, DS-2400, DS-40, DS-51, DS-61, DS-71, LS-10, LS-14, R05, R09HR, PCM-D50, PCM-M10, DR-05, DR-07mkII, DR-08, PR-10, Pocketrak C24, Pocketrak W24, H1, H2, and H2n portable recorders.

For Stage, Theater, and Broadcast TV    Fits Select 3.5mm Recorders    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. How long will the battery last on a shoot and will it be ok to charge on the Watson Compact Charger if the inupt is 100mA(max)?

A: Hello Haven S, how long a battery last depends on the usage however we do have other options for a charger such as out power station (dual fast charger with 2 700mAH batteries included) or our single fast charger we recently released. usually any charger that fit the Sony NP- Series type batteries do work.

Q: 2. Is this compatible with Ninja V+ as it says NP 770 7800 mAh

A: Yes, this will work for the Ninja V+.

Q: 3. Will this work on the ninja blade?

A: Hello Too F, yes it also fits for the Ninja Blade unit.

Q: 4. Does this battery work with the Ninja V+?

A: Yes, the Atomos 5200mAh Battery for Atomos Monitors/Recorders will work with all of the Atomos Ninja models, including the Ninja V+.

Q: 5. Hi, do you know how long it would last powering the Ninja V? Thank you!

A: This battery is rated for 57 Watt Hours. The Ninja V will draw between 10-18 Watts depending on how it is used and the shooting conditions. You should expect this battery to work between 3-5 hours depending on the recording resolution, frame rate, screen settings and other factors with the Ninja V. https://bhpho.to/2qIiqtj

Q: 6. Is this the battery the Ninja 2 uses?

A: yes

Q: 7. Will the Charger that's sold with the Ninja V (for the smaller batteries) charge the Atomas Np-960 7800 mAh battery?

A: Yes it will. This is just a larger version of the batteries found in Atomos Power Kit for Atomos Monitors Recorders, BH #ATOMPWRKT1. You will be able to charge this battery on the charger included in the kit.

Q: 8. How to charge this battery up?

A: You can use any number of chargers with this battery. https://bhpho.to/3fHphxB

Q: 9. Is this battery compatible with the BMPCC 6K Pro and battery grip?

A: Yes. :)

Q: 10. How long does it take to charge the batteries in this kit with the included charger?

A: These should take between 3-4 hours.