You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Countryman E6 Directional Earset Mic, Low Gain, Detachable Cable, Hirose Connector

Countryman E6 Directional Earset Mic, Low Gain, Detachable Cable, Hirose Connector
  • Product Code: eq75492
  • Availability: In Stock

$1,964.85 $2,652.55

The black Countryman E6 Directional Earset Mic, Low Gain, Detachable Cable, Hirose Connectoris a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a 6-pin Hirose connector for direct connection to Samson BT3, CT2, TX4, and UT4 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Samson Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

Key Specs
Compatible TransmittersSamson: BT3, CT2, TX4 (Gray), UT4
Polar PatternCardioid / Hypercardioid
Frequency Response30 Hz to 15 kHz
Maximum SPL145 dB (A-Weighted)
SensitivityW7/7/Low Gain for Very Powerful Vocals (H6, E6, EM6, EM2)
Analog Output1x Hirose 6-Pin Female
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Microphone
Compatible TransmittersSamson: BT3, CT2, TX4 (Gray), UT4
Polar PatternCardioid / Hypercardioid
Included Tone/Pattern CapsHypercardioid, Cardioid
Performance
Frequency Response30 Hz to 15 kHz
Maximum SPL145 dB (A-Weighted)
Sensitivity0.6 mV/Pa
SensitivityW7/7/Low Gain for Very Powerful Vocals (H6, E6, EM6, EM2)
Equivalent Noise Level39 dB (A-Weighted)
Connectivity
Analog Output1x Hirose 6-Pin Female
Cable Length5' / 1.52 m
Cable Diameter0.039" / 1 mm
Power
Power SourcesPlug-In Power
Operating Voltage1 to 2 V
Physical
ColorBlack
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Weight0.07 oz / 2 g

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Is this cable compatible with the Nikon D5600?

A: No, the Nikon UC-E6 USB Cable (4.5') does not work in the D5600. These are ones that will work, https://bhpho.to/3yVajL7 .

Q: 2. I recently lost the cable to my S8100. The original also charged the battery while it was plugged into my computer's USB port. Will this do the same?

A: Yes; the Nikon UC-E6 USB Cable (4.5') is the replacement USB cable that was originally included with the purchase of the Nikon CoolPix S8100 Digital Camera.

Q: 3. how long is the cable? can be custom made?

A: This cable is 3.2 feet long. We do not have custom options available for this cable.

Q: 4. Is this wired for and will it work to power a smallhd ac7 from a Sony f5

A: I'm using this to power up my lectrosonics transmitter via battery bud with a NP-1 battery.If your F5 has an external power source and has a hirose plug for that job, than yeah ot should be able to power up a small ac7

Q: 5. Will this work on an atw-t31?

A: The AT829cW is compatible with the connector on T-31 transmitter and all other UniPak' transmitters from Audio Technica.

Q: 6. Is this cord compatible with a D500?

A: Yes

Q: 7. How long is it stretched and unstretched?

A: At this time, that spec is not specified by the manufacturer.

Q: 8. Will this cable work with Nikon d5100 camera?

A: Yes; the Nikon UC-E6 USB Cable (4.5') is the USB cable that is originally included with the Nikon D5100 DSLR camera.

Q: 9. Does this cable work with batteries having a p-tap connector? Are d-tap and p-tap compatible or exactly the same?

A: If I'm not mistaken, D-tap (named after the shape) and P-tap (abbreviated from PowerTap) are the same connector and interchangeable. In my experience, D-tap is the more common nomenclature in the UK, whereas P-tap is more common the US (and probably Canada). The only other variety I know of is Blueshape's B-tap which is propriety and a different shape.

Q: 10. I’m powering my 702 sound device Need 4pin Hirose x 5.5x2.5

A: This cable is meant for a Lectrosonics system. The cabling you require is dependent on what power source you are coming from. If using a BDS distribution system, here is a cable you could use: https://www.bhphotovideo.com/c/product/283346-REG/Remote_Audio_BDSCSQN_CSQN_BDS_Power_Output.html/specs If from a different power source, I would recommend calling in and speaking with a sales representative for the proper cabling.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Products You May Like

Scorpion Lithium Battery

$116.97 $145.04

Smartfit 6" Poke-thru Fsr Cover - Black

$1,043.85 $1,544.90

Zeiss Cp.3 135mm T2.1 Lens Mft Mount Feet

$18,270.00 $23,202.90

Dji Mavic 3 Enterprise With Dji Care Basic 1-year

$10,884.00 $15,455.28