The black Countryman E6 Directional Earset Mic, Low Gain, 3.5mm Locking Connectoris a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a 3.5mm locking connector for direct connection to Azden older 10BT and 41BT wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Azden Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Is this compatible with Decimator MD-HX?

A: No, the DECIMATOR MD-HX Miniature HDMI/SDI Cross Converter with Scaling & Frame Rate Conversion uses a 2.5mm barrel connector, while the DECIMATOR Power Pack 12 VDC with Locking Coax Connector for Select DECIMATOR Devices provides a 2.1mm barrel connector. The DECIMATOR Power Pack 12 VDC with Locking Collar for Select DECIMATOR Devices is an alternative power supply from Decimator to consider. See the link below: https://bhpho.to/3HdXQr1

Q: 2. Will this work with the Deity Theos?

A: Yes, the Deity Theos will accept the Sennheiser ME 4 Cardioid Lavalier Microphone with Locking 3.5mm Connector (Black) (B&H # SEME4).

Q: 3. Does this come in beige?

A: No, the Sony ECM-V1BMP is only available in black. We do offer other lavalier microphones in beige finish for Sony UWP transmitters such as the Microphone Madness MM-PSM-L Omnidirectional Lavalier Microphone for Select Sony Systems (B&H # MIPSMLSFBE) and Countryman B3 Omni Lavalier Mic, Standard Sens, with 3.5mm Locking Connector for Sony Wireless Transmitters (B&H # COB3W4LSN).

Q: 4. Will this mic work with the Sony UTX transmitters? Looks like the same connection.

A: The Sony ECM V1BMP features a locking 3.5mm jack that is compatible with the UTX bodypack transmitters.

Q: 5. Will this Lav work with the HOLLYLAND LARK MAX?

A: No, because of the locking thread on the connector for the Sennheiser ME4, this can interfere with the connection to the non-locking input, so they may not make a proper connection. You can use a mic like the Saramonic SR-M1 Omnidirectional Lavalier Microphone Cable with 3.5mm TRS Connector (B&H # SASRM1) or the Shure MOTIV MVL Omnidirectional Lavalier Microphone (B&H # SHMVL35MM).

Q: 6. I use the UWP-D11, it says it came with the V1BMP mic. But the description of this mic does not indicate if the jam screws on. The other Sony lave mic, EMC 44 BMP does say the input will screw on. A) is this the mic that came with my system? Or is the description incorrect? I would like to use the same mic. Thank you in advance.

A: The Sony ECM-V1BMP style mic WILL screw onto your mic transmitter unit. The Sony ECM-44-BMP will not screw onto to anything. . .you must attach the XLR connector of your choice yourself. Hope this helps. Dave/austin

Q: 7. Is this also compatible with Sennheiser G4 receivers?

A: The Cable Techniques Right-Angle Locking 3.5mm TRS to Low-Profile TA3M Coiled Cable (8 to 15") would not be recommended for use with Sennheiser receivers. The Sennheiser CL 35-XLR Right-Angle Locking 3.5mm TRS to XLR Male Coiled Output Cable (BH #SE700062 ) should be used instead.

Q: 8. Is their any sort of adapter that will make this useable on a non sony receiver

A: At this time, we do not offer any adapters which will convert this lapel mics connection to a different wireless transmitters connection.

Q: 9. Could this work with a Deity PR2 or a Zoom h1n, or do those not supply enough power?

A: Yes, the Sennheiser ME 4 Cardioid Lavalier Microphone with Locking 3.5mm Connector (Black) is fully compatible with the Deity Microphones PR-2 32-Bit Float Pocket Audio Recorder as well as the Zoom H1n 2-Input / 2-Track Portable Handy Recorder with Onboard X/Y Microphone.

Q: 10. Will this mic work with Sony ECM-AW4 wireless mic?

A: This mic will work with the SONY transmitter.