The tan Countryman E6i Directional Earset Mic for Fender Wireless Transmittersis a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6i earset's cable terminates to a 4-pin female proprietary connector for direct connection to Fender Passport wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Fender Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Can I add blue tooth speakers

A: The Fender Passport Venue Series 2 Portable Powered PA System is designed to be used as a self-contained PA system. It does have a built-in Bluetooth receiver for sending audio into the system, but it does not have a built-in Bluetooth transmitter to send audio out from the system to Bluetooth speakers. In order to do that, you would need to use a separate Bluetooth transmitter connected to one of the outputs - either the 1/4" line output or 3.5mm headphone output, which would both work.

Q: 2. Can this handle be attached to a mini tripod?

A: Yes, you can attach the Rode Interview GO handle to a mini tripod. A clothespin style mic clip like the On-Stage MY200 Clothespin-Style Plastic Mic Clip (B&H # ONMY200) can grip the handle. If the thread on the mini tripod is 1/4"-20, use a thread adapter like the CAMVATE 5/8"-27 Male to 1/4"-20 Female Microphone Screw Adapter (B&H # CAC1150) to accommodate the 5/8" thread on the mic clip.

Q: 3. How long are the speaker cables?

A: At this time, the included cable length is not provided by the manufacturer.

Q: 4. Could I use this with the Hollyland Lark transmitter?

A: No, this is made specifically for the RODE Go.

Q: 5. Can this power the Cinegears Ghost Eye 600MP L Series?

A: Yes, this will power the Cinegears Ghost Eye 600MP L Series.

Q: 6. Can a wireless microphone be used with system?

A: Yes, wireless microphone systems can be connected to the XLR-1.4" combo jack inputs on the mixer panel of the Fender Passport Venue Series 2 Portable Powered PA

Q: 7. This says via its 2-pin LEMO connector yet I see my receiver has 4 pins. I own the 400M unit. Am I missing something or the 2 pins will still work?

A: I have the 150m and the unit works great. I only see two pins on the power supply and two on my receiver. The pics I see on line of the 400m only show two pins and the manufacturer says it works with the 400m. Perhaps the unit you have is a different model or year than the pics I see on line, but I cannot find a 4 pin unit. Hope that helps. If you list a link with the pic of the 4 pin I will compare it to what I have and get back to you.

Q: 8. I would buy this product if it didn't have the logo. Kind of narcissistic, Rode! Anyone know of a similar (perfectly?) sized wind screen to replace the RODE one?

A: Unfortunately this foam wind-screen is custom shaped inside for the unique contours of the Wireless Go plus this adapter. We do not offer another universal type of windscreen that will fit reliably. We do understand your comment regarding the Rode branding. Rode take heed!

Q: 9. Does this fit the Wireless Go II microphones?

A: Yes, the Rode Interview GO Handheld Mic Adapter for the Wireless GO (B&H # ROINTERVIEWG) is compatible tor use with Wireless Go and Wireless Go II transmitters.

Q: 10. How to install the rings on the mic?

A: They just snap on and off. Gently pull the old ring off with fingernail and snap new one on.