The tan Countryman E6i Directional Earset Mic, Low Gain, 3.5mm Locking Connectoris a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6i earset's cable terminates to a 3.5mm locking connector for direct connection to Azden older 10BT and 41BT wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Azden Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this mic work with Sony ECM-AW4 wireless mic?

A: This mic will work with the SONY transmitter.

Q: 2. On the XLR end, does the blue cap rotate so you can change the angle at which the wire comes out of it?

A: The Cable Techniques Right-Angle Locking 3.5mm TRS to Low-Profile XLR Male Coiled Cable for Sennheiser features a right-angle XLR connector. The angle of the connector cannot be adjusted, it is only 90 degrees.

Q: 3. Will it work with Tascam DR-10L Digital Recorder? Any other brand digital recorder?

A: No, the ECM-V1BMP features a proprietary wiring specifically for use with Sony wireless transmitters. The internal hot and ground terminations are different so the mic will not work properly with other devices. The Tascam DR-10L features a locking 3.5mm input connector that is compatible with lavalier mics terminated for Sennheiser wireless transmitters such as the Sennheiser ME 2-II Omnidirectional Lavalier Microphone (B&H # SEME2II), Sennheiser MKE2 Gold Series Omnidirectional Lavalier Condenser Microphone with Accessories (B&H # SEMKE2EWG) or Countryman B3 Omni Lavalier Mic, Standard Sens, with 3.5mm Locking Connector for Sennheiser Wireless Transmitters (B&H # COB3W4BSR).

Q: 4. Is this also compatible with Sennheiser G4 receivers?

A: The Cable Techniques Right-Angle Locking 3.5mm TRS to Low-Profile TA3M Coiled Cable (8 to 15") would not be recommended for use with Sennheiser receivers. The Sennheiser CL 35-XLR Right-Angle Locking 3.5mm TRS to XLR Male Coiled Output Cable (BH #SE700062 ) should be used instead.

Q: 5. Will this work with rode wireless go system?

A: The Sennheiser ME 4 Cardiod Lavalier Microphone has a locking 3.5mm TRS connector and the mic input on the RODE Wireless GO II transmitter uses a standard, non-locking 3.5mm connector, so the mic will connect, but it will not latch to the input on the transmitter for a completely secure connection.

Q: 6. Will this work with Bubblebee Industries Lav Concealer for Sony ECM-77?

A: The dimensions of the capsule ECM-77 are different than the ECM-V1BMP. Based on this, they seem incompatible.

Q: 7. Will this work with the Deity Theos?

A: Yes, the Deity Theos will accept the Sennheiser ME 4 Cardioid Lavalier Microphone with Locking 3.5mm Connector (Black) (B&H # SEME4).

Q: 8. Will this mic work with Rode wireless pro transmitter?

A: The Sony ECM-V1BMP Omnidirectional Lavalier Microphone with Locking Sony 3.5mm Connector is not compatible with the Rode Wireless Pro transmitter. Sony 3.5mm connectors are wired differently from other 3.5mm microphones, and will only work with devices specifically stating compatibility with Sony 3.5mm locking connectors. The Rode Wireless Pro uses a Sennheiser-style 3.5mm locking connector.

Q: 9. Is this compatible with Decimator MD-HX?

A: No, the DECIMATOR MD-HX Miniature HDMI/SDI Cross Converter with Scaling & Frame Rate Conversion uses a 2.5mm barrel connector, while the DECIMATOR Power Pack 12 VDC with Locking Coax Connector for Select DECIMATOR Devices provides a 2.1mm barrel connector. The DECIMATOR Power Pack 12 VDC with Locking Collar for Select DECIMATOR Devices is an alternative power supply from Decimator to consider. See the link below: https://bhpho.to/3HdXQr1

Q: 10. Is this adequate for live singing in a nightclub environment?

A: I might not typically recommend a lavalier for use in this type of scenario (usually a low-profile earset mic would be preferable), but the Sennheiser ME 4's cardioid pickup pattern means that it will perform better in noisy environments than most omnidirectional lavaliers. If it is a choice between this and an omni lav, I would probably go with this. If an earset like BH #SEUE15535HBE is an option however, I would go with the earset. In noisy environments, the closer you can get the mic to your mouth the less background noise and feedback will be an issue.