The cocoa Countryman E6 Omnidirectional Earset Mic, Low Gain, Detachable Cableis a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a 3.5mm locking connector for direct connection to Senal AWS-2000T wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Senal Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. what kind of power bank do i need to power bmpcc 4k and 6k?

A: The ZILR USB Type-C to Canon LP-E6 Dummy Battery Cable requires a USB-C power source like https://bhpho.to/3oz0IqC

Q: 2. What type of protection does this device provide to assure that my camera will not be damaged, i.e output voltage regulation, short circuit protection, overvoltage protection?

A: The ZILR USB Type-C to Canon LP-E6 Dummy Battery Cable (B&H# ZIZRUCDB04) is designed to produce the appropriate electrical power for cameras using Canon LP-E6 series batteries (e.g. LP-E6, LP-E6N, and LP-E6NH) based upon a standard USB Power Delivery (PD) source. Canon mirrorless cameras that accept PD-compliant power sources typically work well when that source is 45W or more. PD technology determines the appropriate power requirements and then electricity is delivered at the most beneficial voltage and amperage from the power source (e.g. a PD-capable battery pack, a PD-rated AC adapter, etc.) Thus the process by which the appropriate determination is made depends not just on the cable but also on the PD-compliant source. The specifications of the process and configuration of the regulation and sensing techniques are standardized. However, the process and any regulation that may occur after such a transformation occurs is not disclosed by the manufacturer.

Q: 3. Is this cable is compatible with the new Nikon D750 DSLR Camera ?Please let me know, Gracias.

A: Yes. This cable is compatible with the Nikon D750 DSLR Camera.

Q: 4. Is this cable compatible with the D700?

A: The D700 uses the Nikon UC-E15 USB Cable, B&H # NIUCE15. https://bhpho.to/2uVwJ2K

Q: 5. Will the LP-E6 version will work with Canon 5DII cameras?

A: Yes, the ZILR USB Type-C to Canon LP-E6 Dummy Battery Cable is compatible with the Canon 5D Mark II.

Q: 6. Will this device work with any charger or battery source that supports the USB-C power delivery specification? Such as an Anker Power Port III charger or an Anker Power Core III power bank.

A: The ZILR USB Type-C to Canon LP-E6 Dummy Battery Cable is designed to work with Zilr batteries https://bhpho.to/3mLbyby However the Anker Power Core III Power Bank ( battery) would also be supported.

Q: 7. I don't see it in the Body List, but does is the UC-E6 for the D5300 also?

A: Yes, the UC-E6 is compatible with the Nikon D5300.

Q: 8. Do these record descretely to the left and right channels or do they sum together? I could see phasing issues, if together.

A: Although not specifically mentioned by the manufacturer, it could be assumed that the microphones on the BOYA BY-M2D Digital Dual Omnidirectional Lavalier Microphones with Detachable Lightning Cable (iOS) are separated on the left and right channels of the stereo 3.5mm connection and would likely depend on the capabilities of the specific software application to further isolate each mic signal.

Q: 9. Will it work with newest Canon EOS R50?

A: No, the ZILR USB Type-C to Canon LP-E6 Dummy Battery Cable is incompatible with the Canon EOS R50 Mirrorless Camera (Black) since the camera accepts the Canon LP-E17 Lithium-Ion Battery Pack and not the Canon LP-E6NH Lithium-Ion Battery (7.2V, 2130mAh) style battery. Consider the Bescor LP-E17 Dummy Battery with USB Type-C Connector Kit. See the link below: https://bhpho.to/3xSqytB

Q: 10. Does this cable work with batteries having a p-tap connector? Are d-tap and p-tap compatible or exactly the same?

A: If I'm not mistaken, D-tap (named after the shape) and P-tap (abbreviated from PowerTap) are the same connector and interchangeable. In my experience, D-tap is the more common nomenclature in the UK, whereas P-tap is more common the US (and probably Canada). The only other variety I know of is Blueshape's B-tap which is propriety and a different shape.