The cocoa Countryman E6 Omnidirectional Earset Mic for Sony Wirelessis a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a 3.5mm locking connector for direct connection to Sony ZTX-B01 and ZTX-B02RC wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Sony Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. What kind of run times are you getting with what type of battery? Please state what teradek system you use, as well as either Canon LP-E6, Or what size L series battery you use. Thanks!

A: With the Pawa LP-E6 Lithium-Ion Battery Pack (7.4V, 1600mAh) and Teradek Bolt 4K LT 1500, I'm getting about 1.32 hours of battery life.

Q: 2. Can anyone confirm if this will work with the new Bolt 4K LT 750 transmitter?

A: The Bolt 750 4k LT will only work with Vmount plates like the following. Vmount Battery side - https://www.bhphotovideo.com/c/product/1507496-REG/teradek_11_0854_pro_battery_plate.html Vmount Camera side - https://www.bhphotovideo.com/c/product/1500409-REG/teradek_11_0855_bolt_4k_v_mount_battery.html

Q: 3. If I want to put this mic on someone moving a lot as I follow them, will it pick up the rubbing of their clothing easily?

A: If you wish to hid the microphone under clothing, place the capsule in a small silk pouchthis will prevent rubbing noise. On the other hand, if you plan to have the microphone visible and clipped to a lapel or tie, nothing extra is required.

Q: 4. To link this to a DSLR with a 3.5mm jack in a way that adds to the length of the cord, I could use a 20' Kopul Premium Performance 3000 Series XLR M to XLR F Microphone Cable, plus a Kopul LMT100 - Low to High Impedance Matching Transformer, correct? The length will not degrade the sound, and I can go right into the camera?

A: Correct. A standard XLR mic cable in addition to the Kopul LMT-100 cable will allow you to connect the ECM-44B directly to a DSLR. At this length would not affect the audio quality.

Q: 5. what does it come with ?

A: It comes with the microphone, mic clip, wind screen and fitted microphone case.

Q: 6. Does this come with the screws to attach it?

A: Yes.

Q: 7. I would buy this product if it didn't have the logo. Kind of narcissistic, Rode! Anyone know of a similar (perfectly?) sized wind screen to replace the RODE one?

A: Unfortunately this foam wind-screen is custom shaped inside for the unique contours of the Wireless Go plus this adapter. We do not offer another universal type of windscreen that will fit reliably. We do understand your comment regarding the Rode branding. Rode take heed!

Q: 8. Will this work with the Rode GO II mic transmitter?

A: Yes.

Q: 9. Will this work with the ACE 750, too?

A: Yes, the Teradek L-Bracket Battery Adapter Plate for Canon LP-E6 & Sony L-Series Batteries is listed in the recommended accessories and is compatible fully with the Teradek Ace 750 HDMI Wireless Video Transmitter and Receiver Set.

Q: 10. Is this compatible with Paralinx Ace?

A: The Teradek L-Bracket Battery Adapter Plate for Canon LP-E6 & Sony L-Series Batteries is able to mount power for the Paralinx Ace