The cocoa Countryman E6 Omnidirectional Earset Mic for Audio Technicais a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a cH-style 4-pin connector for direct connection to Audio Technica ATW-T5201 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Audio Technica Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Does this unit come with any cables please? If not, then Where in the BH photo cable finder is a cable that will work with this unit connecting an AT boundary MIC that needs phantom power please? Thanks.

A: No cables are included. The cable from the mic connects to the unit's input.

Q: 2. What is the diameter of the top of the mic?

A: Approx 7/8 of an inch.

Q: 3. Will this power an AT boundary mic and if so, what cables are required please. Application is an older boundary mic to work with a Tascam DR-40? Thanks for your time.

A: I do know that this works with AT condenser mics which require phantom power. I am ALMOST sure that this is true for the AT boundary mic as well. The boundary mic should have the mini AT connector that fits the smaller connector on the power pak, then a standard XLR mic cable goes from the other connector on the power pack to the mixer.

Q: 4. Does this mic work with the Nikon D90?

A: No. The D90 does not have an external mic input.

Q: 5. Is AT8449a compatible with Audio-Technica AT2020USB+ ?

A: No, it is not. Please consider the Auray SHM SCM1. https://www.bhphotovideo.com/c/product/1075694-REG/auray_shm_scm1_shock_mount_for_condenser.html

Q: 6. How long is the included xlr/phono cable?

A: The Audio technica BPHS1 ships with the BPCB1 cable which is 3.3 m (10.8') long. a href= http://bhpho.to/1zeJPSh target= _blank http://bhpho.to/1zeJPSh/a

Q: 7. Hi, Would this mic be compatible with the sony hxr-nx100? If not could suggest a similar mic that would be. Cheers, -Mike

A: Yes, you can use the Audio-Technica AT875R with a Sony HXR-NX100 camera.

Q: 8. Is the AT8035 moisture resistant?

A: No, the Audio-Technica AT8035 Long Shotgun Microphone is not moisture-resistant. As an option for a long shotgun microphone that is moisture-resistant, you can use the Deity Microphones S-Mic 2 Moisture-Resistant Shotgun Microphone (B&H # DESMIC2) or the RODE NTG3B Moisture-Resistant Shotgun Microphone (B&H # RONTG3B).

Q: 9. I have a Galaxy S9 Android phone. Is the connector in the TM-St1 removable so I could use the Rode SC7 3.5mm TRS to TRRS Patch Cable B&H # ROSC7? Or is there a TRS to TRRS adapter I could purchase?

A: The connecting cable is not removable.Use this adapter:Rode SC4 3.5mm TRS to TRRS Adaptor B&H # ROSC4

Q: 10. Is this compatible with a Panasonic HC-V750?

A: The basic answer is yes. This microphone is compatible with the 3.5mm audio input jack on that model according to the specs on this website. As for mounting, I cannot say. I've only mounted this mic on a stand.