Half of the PowerSync Mini Digital Radio Slave System, the PowerSync Mini Transmitter Receiver Kitfrom PowerSync Mini Transmitter Receiver Kitoperates on the 2.4 GHz frequency to accept signals from its optional transmitter, allowing manual triggering of flash units at distances up to up to 328'.

The PowerSyc Mini System has 16 discrete channels to thwart interference from other shooters on site or to separately trigger groups of speedlights or studio strobes in several different setups or in complex lighting scenarios at sync speeds as short as 1/200 second. By attaching the receiver directly to your camera, it's also possible to use the transmitter as a handheld remote trigger.

The receiver features a multi-use hot shoe mount that's compatible with most flashes. Measuring only 3.1 x 2.1 x 1.2" and weighing just 2.6 oz, you'll barely know that it's in your bag. The receiver operates on two included AA batteries.

1 x PowerSync Mini Transmitter    1 x PowerSync Mini Receiver    16 Wireless Channels, 2.4 GHz Frequency    328' Wireless Range    1/200 Second Flash Sync    3 x Mounting Options for Receiver    Compatible with Impact PowerSync 16

16 digital channels operating on the 2.4 GHz frequency prevent interference from other shooters at events and is ideal for multiple setups and complex lighting scenarios.

A speedlight or strobe can be triggered at distances up to 328' - an especially valuable feature for flash units mounted in hard to reach places.

Compatible with most cameras, the receiver has a sync speed of 1/200 second allowing the user to freeze action without ghosting.

The PS16-MINI-R has a 1/4"-20 threaded socket for stand-mounting, while a cradle with reusable adhesive strips is included so you can conveniently attach the receiver to a studio light. A lanyard is also included to hang the receiver on a light stand.

The receiver is also compatible with Impact's PowerSync 16 Transmitter.

Related Questions and Answers

Q: 1. Does the transmitter and receiver have to be line of sight?

A: Thanks to the 16 Wireless Channels, 2.4 GHz Frequency, it does not have to be line of sight.

Q: 2. Can I use it with a Ricoh GRiii or Leica M10?

A: The PowerSync Mini Transmitter and Receiver Kit should be compatilbe with both the Ricoh GRiii and the Leica M10 cameras.

Q: 3. Is this sufficient for file transfer? Use case would be mounting external HD to NAS from across CAT6A tie lines. So I can back up NAS files without going to the basement or through the network.

A: It would not be recommended for data integrity. It is also going to be slow this is USB 2 speed.

Q: 4. My cable box has a port that reads IR. I presume that I may plug this into that port so I can place the cable box out of sight?

A: It's difficult to predict how well any ir extender will work in a particular situation. Lights can be a factor. Kopul intends this transmitter and receiver kit to be used with a switch like this: Kopul HDMI Switcher 4 x 1 B&H # KOHDSW2041 MFR # HDSW-2041. You may be able to use something like this: Kramer 3.5mm to Single IR Emitter Cable (10') B&H # KRCA35MIRE10 MFR # C-A35M/IRE-10

Q: 5. I am trying to send a usb signal from an m32 soundboard. will this be compatible with it?

A: Yes. But you will only get the rated distance stated on B&H for the protocol that your device uses so take that into consideration. Also there is an IC at each end if the cat6 so it will add a but of latency to the round trip

Q: 6. Will this work with an Apple Macbook Air? I've heard in some reviews that it will not, but in other reviews that it will.

A: iI is advertised as being compatible but results have varied as you point out. I recommend contacting Iogear directly for their opinion and guidance.IOGEARTel: 866-946-4327 or 949-453-8782Email: support@a href= http://iogear.com target= _blank iogear.com/aWebsite: a href= http://www.iogear.com/ target= _blank http://www.iogear.com//a

Q: 7. Is this compatible with a Nikon D3400?

A: The Impact PowerSync Mini Transmitter and Receiver Kit is a manual trigger system which means it will work with any digital camera.

Q: 8. Will this kit allow an AppleTV remote to connect with and work with a 2013 MacBook Air?

A: Depending on the Apple TV remote you have, it will work with the MacBook Air. This will not control your MacBook. You can use the standard Apple remote BH #APMM4T2AMA.

Q: 9. Can it be utilized outside in inclement weather conditions? If so, Please provide the MTTFF and MTBF?

A: No, the Thor Satellite L-Band RF over Fiber Transmitter and Receiver Kit is not waterproof. This unit would need to be mounted in NEME4 waterproof enclosure. Also, the failure rate is very low, it is about 1 % in 2 years of operation.

Q: 10. what cable would I need to use this as a remote trigger for the nikon z6?

A: Being that the Nikon Z system cameras use the DC2 type remote connection, the PocketWizard N-MCDC2-ACC 3' Nikon Remote Camera Cable for Nikon, B&H # WICFTT5ND90 can be used to connect this remote to your Z6. https://bhpho.to/3b32dEp