The black Countryman E6i Omnidirectional Earset Mic for Audix Transmittersis a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a TA3F connector for direct connection to Audix B60 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Audix Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. What does the drops and spills protection cover?

A: Drops and Spills would generally cover any accidental damage done to the unit while using the product in its intended manor. More information regarding the coverage, terms and conditions of the Square Trade protection plans can be found at the following link: http://bhpho.to/1fMHaTB

Q: 2. Can I plug this in directly to a church PA system or does it need to go through a mixer?

A: The Audix APS2 only provides Phantom power to mics which require it. No preamplification. The outputs from the unit are mic level and can be connected to any device that features a mic input such as a mixer or PA system.

Q: 3. Will this work with Hollyland Lark?

A: No, the SmallRig Telescoping Interview Handgrip for Rode Wireless GO is designed specifically for use with the Wireless GO transmitter which is slightly larger than the Hollyland Lark transmitter. The Rode Wireless GO transmitter is 1.7 x 1.8 x 0.7" ( 44 x 46.4 x 18.5 mm) and the Hollyland Lark transmitter is 1.5 x 1.5 x 0.7" (37 x 37 x 17 mm).

Q: 4. Can this be used with condenser podium mics such as the Shure Centraverse CVG18-B/C?

A: This adapter is meant to be used with specific Audix mics utilizing a ta3f connection. This would not be compatible with standard XLR mics like the Shure CVG18-B/C.

Q: 5. will this power up an MKH 60 ?that needs phantom power,and then connect the output to a wireless plugon that does not supply phantom

A: No, the Audix APS910 will not work with the MKH 60 because it converts 48V phantom power to plug-in power of less than 9V for lavalier and headset mics. As a better option, use the Sennheiser K6 Microphone System Powering Module (B&H # SEK6Q) which uses a AA battery to supply phantom power and has standard XLR connectors on both sides.

Q: 6. Could this item be used with AKG lavalier mics?

A: Not at all. It is compatible with these Audix Microphones only: ADX10, ADX40, ADX60, HT5, ADX10FL, HT2, ADX20i and Micro-D

Q: 7. IS this USB 2.0 or 1.1 ?

A: The Audix USB12 requires a USB2.0 connection or higher for proper operation.

Q: 8. Can this be used to supply power for the Electro-Voice RE92L?

A: The APS911 is designed for use with Audix mics that feature a mini XLR connection. Unfortunately not confirmed to operate with non Audix mics due to differences in mic wiring and power requirements.

Q: 9. Is this Microphone can be hanging from the ceiling as well?

A: You can, but it is not intended to be hung from the ceiling. You may want to consider the Astatic 2600VP for a high quality hanging mic: https://www.bhphotovideo.com/c/product/754716-REG/Astatic_2600VP_Variable_Polar_Pattern_Hanging.html

Q: 10. Is there a foam cover available that will fit this?

A: Yes. Rode offers: ROINTERVIEWG