The black Countryman E6 Directional Earset Mic for Vega Wireless Transmittersis a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a LEMO 4-pin connector for direct connection to Vega 77 and 677 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Vega Transmitters    Headroom for Speaking and Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this fit a Panasonic AG-AF100?

A: The Panasonic compatibility list includes: Panasonic AG-HPX500, Panasonic AJ-HPX2000, 2100, 2700, 3000, 3100, 3700, 502... The AG-AF100 is not on that list and would probably lead to issues regarding function access on the camera.

Q: 2. Is this backward compatible with Evolution G3/G4?

A: Yes you can use the ADP UHF Passive Directional Antenna for EW-D Wireless Systems (470 to 1075 MHz) with Evolution G4 and G3 rack receivers.

Q: 3. Will this power a SmallHD 703 UltraBright (MON-703U) monitor?

A: We are unable to verify if this would work or not. Since it is third party, an independent service technician would need to verify it's viability as a power source. But instead of that rigmarole, we would recommend this instead by SmallHD. We know this will work. SmallHD 2-Pin LEMO to Wall Power Cable (12V, 4.5A) B&H # SMPWR212V45A.

Q: 4. Will this work with the 150M receiver as well?

A: Yes, this is compatible with the Ghost Eye 150M and 400M transmitter and receiver units.

Q: 5. CAN THESE BE USED WITH THE OLDER GLXD RECEIVERS since it's both 2.4 and 5.8 GHz? thanks!

A: Yes, the Shure PA805DB-RSMA Dual-Band Passive Directional Antenna can be used for the older Shure GLX-D systems when operating on the 2.4 GHz band.

Q: 6. What are the panel size and weight specifications please?

A: ZOLAR Vega 30C 4.53 kg 6.03 kg with power supply Following unit comes in at 12x12 inches

Q: 7. Does it work wit the canon R7? I have one of these and ideally wouldnt want to buy a new one for the r7

A: Yes this will work with the Canon R7.

Q: 8. This says via its 2-pin LEMO connector yet I see my receiver has 4 pins. I own the 400M unit. Am I missing something or the 2 pins will still work?

A: I have the 150m and the unit works great. I only see two pins on the power supply and two on my receiver. The pics I see on line of the 400m only show two pins and the manufacturer says it works with the 400m. Perhaps the unit you have is a different model or year than the pics I see on line, but I cannot find a 4 pin unit. Hope that helps. If you list a link with the pic of the 4 pin I will compare it to what I have and get back to you.

Q: 9. What size is the barrel connector, 2.1 x 5.5mm?

A: Yes, the barrel connector of the LanParte E6 Battery Dummy Pack (B&H# LAE6P01) has a 2.1mm center pin and can accommodate a barrel connector that has an outer diameter of 5.5mm.

Q: 10. (Thank you for including the SSI rating.) How loud is the fan?

A: The following unit is silent in a production environment the following system produces dp levels between 30-50. which is considered silent in a production enviroment.