You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Countryman E6 Directional Earset Mic, Medium Gain, Ta4f Connector

Countryman E6 Directional Earset Mic, Medium Gain, Ta4f Connector
  • Product Code: eq76013
  • Availability: In Stock

$1,949.85 $2,417.81

The black Countryman E6 Directional Earset Mic, Medium Gain, TA4F Connectoris a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a TA4F connector for direct connection to Anchor Audio WB-6000, WB-6400, and WB-8000 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Anchor Audio Transmitters    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

Key Specs
Compatible TransmittersAnchor Audio: WB-6000, WB-6400, WB-8000
Polar PatternCardioid / Hypercardioid
Frequency Response30 Hz to 15 kHz
Maximum SPL135 dB (A-Weighted)
SensitivityW6/6/Mid Gain for Speaking and Vocals (H6, E6, EM6, EM2)
Analog Output1x TA4F/Mini-XLR 4-Pin Female
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Microphone
Compatible TransmittersAnchor Audio: WB-6000, WB-6400, WB-8000
Polar PatternCardioid / Hypercardioid
Included Tone/Pattern CapsHypercardioid, Cardioid
Performance
Frequency Response30 Hz to 15 kHz
Maximum SPL135 dB (A-Weighted)
Sensitivity1.9 mV/Pa
SensitivityW6/6/Mid Gain for Speaking and Vocals (H6, E6, EM6, EM2)
Equivalent Noise Level29 dB (A-Weighted)
Connectivity
Analog Output1x TA4F/Mini-XLR 4-Pin Female
Cable Length5' / 1.52 m
Cable Diameter0.079" / 2 mm
Power
Power SourcesPlug-In Power
Operating Voltage1 to 2 V
Physical
ColorBlack
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Weight0.07 oz / 2 g

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Can this also be used while charging on wall power, i.e. using it like a Canon DR-E6C DC Coupler?

A: Unfortunately, it is not possible to charge, as well as power a camera at the same time with the Anton/Bauer Titon Base Kit for Canon LP-E6-Powered Cameras. The kit will not work as a dummy battery coupler when connected to wall power.

Q: 2. Will this work with an R5c and DTap to USB-C Kondor Regulator Cable ?

A: The Anton/Bauer 68Wh Titon Base Battery will provide power to the Canon EOS R5C with the DTap to USB-C Kondor Regulator Cable.

Q: 3. For BMPCC 6K Pro, is it safe to leave an internal battery in the camera while plugged into d tap via 2 pin? Also, if the Titon dies will the camera automatically switch over to the internal battery without interruption?

A: If the Titon battery dies, the camera will automatically switch over to the internal battery without interruption.

Q: 4. When using an FX-3 is there any “wobble” with the Anton Bauer plate?

A: The baseplate on the Anton/Bauer 68Wh Titon Base Battery can be unstable at times.

Q: 5. How after charging the battery turn off for preservation of the charging

A: The Anton Bauer 68Wh Titon Base Battery will turn itself off automatically. The Titon Base will shut off after a few minutes when it is not connected to the power supply or accessory that requires power.

Q: 6. Which version will work with a Canon R5?

A: At this time we do not have an option with the proper connection for the EOS R5.

Q: 7. Can I use the USB output of the Titon Base to power my Fujifilm X-H2S via USB-C, or should I buy a D-TAP to USB-C adapter?

A: The USB port on the Anton/Bauer 68Wh Titon Base Battery does not support PD (regulated power delivery). It will be required to get a D-TAP to USB-C PD adapter to power your camera.

Q: 8. they're called 'high gain' antennas .. but what db gain are they ?

A: Regarding the DJI Transmission High-Gain Antenna Set (4-Pack) Blackmagic Design states "With a bendable design, these high-gain antennas further improve transmission capability," but do not describe the numbers behind the antennas.

Q: 9. Hello. I want to import 9 batteries. I need to know: what is the package measurements and weight? Thanks

A: The dimensions of this battery in the original packaging are 7.25 x 2.75 x 1".

Q: 10. Can anyone recommend a device so I can attach this DC coupler to a V-Mount battery source?

A: You could use a v-mount battery plate like this from SmallRig: https://www.bhphotovideo.com/c/product/1643740-REG/smallrig_3203_v_mount_battery_adapter_plate.html

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Products You May Like

Fargo Hdp6600 Dual-sided Retransfer Id Card Printer

$11,539.44 $14,539.69

Ez Dupe 63 Sd And Microsd Duplicator

$16,485.00 $25,386.90

Rcf Nx 32-a 1400w 12" Loudspeaker Black

$3,747.00 $4,608.81

Foba Asabe-25 Shaft Extension For Stands 9.8"

$3,254.97 $4,947.55

Slik Mini Pro Iii Tripod With Ball Head

$104.85 $147.84

Madrix 5 Start To Basic License Upgrade

$3,384.00 $4,534.56