The black Countryman E6i Omnidirectional Earset Mic for Line 6 Wirelessis a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a 1/4" connector for direct connection to Line 6 TBP06 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Line 6 Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Is there the same type cable as this but longer than 9"? I need it for a GH5 on a gimbal.

A: I would say 12 to 14 inches.

Q: 2. Will the Sescom LN@MIC-TASDR100 work with a Panasonic gh4?

A: Yes, the Sescom LN2MIC-TASDR100 Line Out to Camera Mic Level In Cable will work to adapt a line level output device signal into the microphone input on the Panasonic Lumix GH4 Mirrorless Camera.

Q: 3. Is this cable compatible with the Blackmagic Micro Cinema Camera?

A: This splitter cable is compatible with the Black Magic Micro Cinema Camera, if you do require a female headphone tap as well as an output from a digital recorder. But be aware that the camera can accept a line level signal into the 3.5mm input, so the attentuation to mic level is not necessary.

Q: 4. what is the warranty period on this earbuds?

A: This product has a two year, limited manufacturer's warranty.

Q: 5. is this used to get rid of hum?

A: Yes, this device typically will remove the 60Hz AC hum generated by connecting two devices that are not sharing the same AC ground.

Q: 6. what is the width of the flexible cable (not the plug which is 3.5mm)?

A: I am not sure I completely understand your question. If you could rephrase that it would be extremely helpful. Specs for the EAC64CL - (Clear 3.5mm cable that is included) The cable it's self is 64 inch long. The part of the cable that loops around your ear is 3 inches long. The diameter is 1/8 of an inch wide.

Q: 7. Would this cable work to record line level from a mixer to an iPhone?

A: The Sescom LN2MIC-TASDR100 Line Out to Camera Mic Level In Cable will convert line level signal to mic level, but you would need to use additional adapters to connect from the mixer and to enable compatibility with the iPhone. As another option, Sescom does offer other types of line to mic attenuator cables that are intended for use with smartphones and have a 3.5mm TRRS connector on the end that connects to the smartphone which you would use with the Apple Lightning to 3.5mm Headphone Jack Adapter (B&H # APLAADAP) to convert the TRRS plug to Lightning. Depending on the mixer and its available output connectors, you will have different options such as the Sescom Dual 1/4" Phone Plug to 3.5mm TRRS Plug Line to Microphone Summing Cable 3' (B&H # SEIPSUMTS3) or the Sescom Stereo RCA to 3.5mm TRRS Plug Line to Mic Level Summing Cable for Mobile Devices 36" (B&H # SEIPSUMRCA3) or the Sescom Dual Female XLR to 3.5mm TRRS Plug - Line to Mic Level Summing Cable for Mobile Devices 3' (B&H # SEIPSUMXLR3). These cables will send the left and right output from the mixer and will connect to the iPhone when used with the Apple Lightning adapter

Q: 8. Does this Wall Mount work with Condenser Mics that require phantom power?

A: Yes it will pass phantom power if your mixer has Phantom power or you purchase the phantom power injector module from RDL

Q: 9. Does Klark Teknik CM 1 pass phantom power to mic? Does it employ Ground Lift to prevent phantom power reaching mic?

A: When using the Klark Teknik Mic Booster CM-1 In-Line Microphone Preamplifier, phantom power would not be passed to a connected mic. Regarding a ground lift, Klark Teknik doesn't specify if one is used inside this booster.

Q: 10. How many channels of audio does the cable send?

A: This, Sescom LN2MIC-TASDR100 Line Out to Camera Mic Level In Cable, is intended to pass stereo (L/R) signals.